No IGMP & UDPXY proxy among packages
-
Hi people,
Need Your help:
I have implemented pfSense-2.0.1-RELEASE-i386.iso on HP dx5150 (even AMD64 was not able to load after IPsec) with intention to use with IPTV. According to help on forum, I went to System -> Packages to install UDPXY or at least IGMPproxy and I was surprised - nothing found among the list of other PORTS.OK, so I decided to implement by hands - manually.
Downloading also was not so succesfull - pkg_add -r udpxy was missing PACKAGE (ROOT and SITE in setenv).OK, so I decided to upload udpxy-1.0.21.tbz file from PC at LAN (it was uploaded to /tmp/ folder.
After that I ran fetch command. And intended to check if it was implemented I ran udpxy -v. Result was a lot of information on switches and other help.But after restart - /tmp/ was empty. According to manual on forum there was offer to rename udpxy to udpxy.sh and copy it to /sbin (probably in /usr ???)
I need Your help to implement this feature on pfsense.
-
Use this site to download package from freebsd to pfsense
pkg_add -r http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/8.1-RELEASE/packages/Latest/Package_you_want.tbz
Also check this topic
http://forum.pfsense.org/index.php/topic,2996.0.html -
The IGMP proxy is already in the base and not a package anymore.
You can configure it under "Services –> IGMP proxy" -
Ok, falks. After try out - I'll write down the result.
-
Hi people,
Just began my implementation:
I need to edit /etc/defaults/rc.conf to add "variable" udpxy_enable="YES"
so how to do it better:VARIANT A):
cd /
cd /etc/defaults/
ee rc.confVARIANT B):
echo "udpxy_enable=YES" >> /etc/defaults/rc.conf
But here result is not right, as should be YES as "YES"
I was trying also:echo "udpxy_enable="YES"" >> /etc/defaults/rc.conf
But still same result.
-
to get "" redirected to a file, use
echo 'enable_my_var="YES"' >> /root/test.conf
-
pfSense does not use rc.conf.
Stick the script in /usr/local/etc/rc.d/, make sure it ends in .sh, edit the script and set that variable at the top.
-
Good day calleagues,
I'm trying to implement mutli VLANs with IPTV support:
Hereby I have placed a picture, where Pic. A1 is representing old system and Pic. A2 depicts new one:
Interfaces:
WAN (VLAN1): 88.88.88.88
LAN (VLAN100) 192.168.1.1
LAN OPT2 (VLAN101) 192.168.2.1I have configured IGMP service as follow:
Firewall>Rules>Lan
added rule
Action=Pass
Interface=Lan
Protocol=IGMP
Source=Lan subnet
Destination=Network 239.2.3.0/24
Advanced Options>checked "This allows packets with IP options to pass…"
Rule is placed almost on topFirewall>Rules>Wan
added rule
Action=Pass
Interface=Wan
Protocol=UDP
Source=any
Destination=Network 239.2.3.0/24Applied all changes.
Services>IGMP Proxy
added upstream
interface=Wan
Type=Upstream Interfece
Threshold=1
Network(s)=88.88.88.88/24 192.168.1.1/24added downstream
Interface=Lan
Type=Downstream Interface
Threshold=1
Network(s)=192.168.1.0/24System>Advanced>Firewall/Nat
checked Disable Firewall ScrubIn Interfaces: WAN I have removed check mark from Block private networks в секции Private networks
Also configured UDPXY as follow:
At command prompt I have ran such command:
pkg_add -r http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/8.1-RELEASE/packages/Latest/udpxy.tbzThen renamed udpxy file (which is placed in /usr/local/etc/rc.d/) into udpxy.sh and editted it as follow:
udpxy_enable=${udpxy_enable="YES"}
udpxy_flags=${udpxy_flags-" -a 192.168.1.1 -c 4 -M 60 -m 88.88.88.88"}Also I'll try to modify as suggested jimp udpxy_enable="YES" into rc.d
I have checked status of udpxy over http://192.168.1.1:4022/status
But, no streaming over multicast with http://192.168.1.1:4022/udp/239.192.12.5:1234
Can You help or suggest on how to fix this problem.
-
The IGMP proxy is already in the base and not a package anymore.
You can configure it under "Services –> IGMP proxy"Isn't already installed on pfsense just like GruensFroeschli said?