How to Separate LAN User Public IP and Server Public IP
-
Hi, good day,
I want to know is it possible to make setup like this:<public 1="" ip="" for="" all="" lan="" user="">–-----| |---------- <interface 1="" 24="" for="" all="" lan="" user="" subnet="" ex:="" 192.168.4.0="">(Ex IP : 202.122.33.210) | |
|-----<pfsense>-----|
<public 2="" ip="" for="" all="" server ="">--------| |----------- <interface 2="" 24="" for="" all="" server="" subnet="" ex:="" 192.168.0.1="">(Ex IP : 202.122.33.211)
-webserver, mailserver, others.. is there any guide to do so?
...Thank you very much</interface></public></pfsense></interface></public> -
Manual outbound nat and portforwards are anything you need
-
Thank you very much… it works now..
does the existing rules applies for that external IP address I created?
Thanks -
What do you mean? if i remember correctly automatic rule uses only ip-address set to wan during install. any additional wan addresses are left unused until you use manual outbound nat
-
i see.. okay, thank you very much…