Opinions on this pfsense box
-
CPU: Opty 146
Mobo: DFI Lanparty RDX200
Mem: 2x 1gb G.Skillz HZ
HDD: 1x 36gb Raptor
Using both lan ports which are Marvell's one is pci the other is pci-e and also use a NIC which is a DMZ.Just curiuos how this setup will fair with:
1 PS3 (dmz)
1 Xbox (dmz)
2 Wii
1 Desktop
2 LaptopAbout the only packages I plan on really running outside of the firewall is squid and snort.
EDIT: This is obviously an old desktop I used and is doing a whole lot of nothing. The CPU can be overclocked easily to 3ghz without any additional voltage.
-
It completely depends on your WAN bandwidth. However you'll almost certainly be fine. ;)
Steve
-
You might want to try loading the LiveCD on the setup first. I'm not certain if the MSK drivers are fixed yet.
-
Hmm, you're right. The 88E8053 is the chip which keeps locking up on the Firebox. It will be fixed in 2.1 though. Also I've never had a problem with it running at 100Mbps so perhaps use it for WAN.
Steve
-
I had problems with MSK drivers, some watchdog error(s). Supposedly it is fixed in FreeBSD 9. Witch pfSense 2.1 is based on.
Good Luck
-
Thanks for all the info guys.
I tried putting the msk on WAN however it would then just crap out hopefully 2.1 comes out soon. So it currently is sitting on LAN but I might have another pci nic to replace until the fix.