NEW Package: freeRADIUS 2.x

filip_pag

@filip_pag

i want to limit bandwith for one user, I enter bandwith limit(upload&downlaod) for
user account but it isnt working, I tried also for MAC address but it dont work, do I
have to enable some rule or?

Bandwidth-Limit needs - as most of the settings - support of your NAS. The NAS can be your switch, access-point or pfSense Captive Portal.
The attributes the NAS must understand are the following:
WISPr-Bandwidth-Max-Up
WISPr-Bandwidth-Max-Down
Check your NAS documentation or post the NAS then we perhaps can find out how to handle this.

When using Captive Portal on pfSense then take a look here:
http://doc.pfsense.org/index.php/FreeRADIUS_2.x_package#Amount_of_Bandwidth

hm, do I have to put just this in CP index?

count-attribute = WISPr-Bandwidth-Max-Down
count-attribute = WISPr-Bandwidth-Max-Up

this is my index code


<title>Welcome to network</title>

<form method="post" action="$PORTAL_ACTION$">

		 **![](captiveportal-header.png)

		![](captiveportal-network_logo.png)** Welcome to network wirelless.

		Username i password "free"

		Username i passwordticket / Voucher **Username**

		**Password**

		**Ticket / Voucher**

		for assistence write to:
		 [network@mail.com](mailto:network@mail.com)

		![](captiveportal-ios_ikone.png)

		![](captiveportal-Centar.png)

		network © 2012 ł Design by networkł Powered by 
		pfSense

</form>

Nachtfalke

The attributes in my documentation are only to show which attributes are needed for this to work. If the NAS does not support these attributes than bandwidth limit will not work. But Captive Portal can do this.

What you have to do is:

Go to:
SERVICES => CAPTIVE PORTAL
scroll down and enable "Per-user bandwidth restriction"
leave bothe fields empty (so all users have unlimited bandwidth).

Go to:
SERVICES => FreeRADIUS => USERS
there you create all users you want. For the one user you want to limit its bandwidth scroll down to:
"Maximum Download Bandwidth" and "Maximum Upload Bandwidth".
There you have to enter the bandwidth limit for the user.
Important: You have to enter "BIT per second"….8Bit = 1Byte and 1024Byte = 1Kilobyte

After you have changed bandwidth limits for a user AND this user is connected while you changed the settings than the will not take effect. So make sure that you disconnect the user after you made changes so that the user needs to reconnect.

PS: Not sure if it works 100% because there seems to be a bug in CP and/or ipfw which counts sometimes different. For example when using "Amount of traffic" then if in real 1MB passes CP than CP sends back 6MB to the RADIUS server.

So do some tests and try to find out how it works.

filip_pag

I've done all you saied ant got this with radtest:

$ radtest test test 172.16.0.1:1812 0 ldskfjldskdfjslkf4
Sending Access-Request of id 16 to 172.16.0.1 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 172.16.0.1
NAS-Port = 0
Message-Authenticator = 0x00000000000000000000000000000000
rad_recv: Access-Accept packet from host 172.16.0.1 port 1812, id=16, length=44
WISPr-Bandwidth-Max-Up = 81920
WISPr-Bandwidth-Max-Down = 819200

is that OK?

Nachtfalke

@filip_pag:

I've done all you saied ant got this with radtest:

$ radtest test test 172.16.0.1:1812 0 ldskfjldskdfjslkf4
Sending Access-Request of id 16 to 172.16.0.1 port 1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 172.16.0.1
NAS-Port = 0
Message-Authenticator = 0x00000000000000000000000000000000
rad_recv: Access-Accept packet from host 172.16.0.1 port 1812, id=16, length=44
WISPr-Bandwidth-Max-Up = 81920
WISPr-Bandwidth-Max-Down = 819200

is that OK?

Yes it is.

Nachtfalke

Updates pkg v1.5.7:

Added: checks for CA, certs when using EAP-TLS
Added: ability to export certs in .p12 format which can be used on windows systems when using EAP-TLS
Fixed: a bug when NAS shortname contains whitespace(s)
I will update FreeRADIUS 2.x package documentation: How-to for EAP-TLS (LAN), EAP-PEAP (LAN), match common name, match issuer

marcelloc

Hi Nachtfalke,

I've received a patch from freeradius maintainer to compile it with heimdal instead of krb5.

I'll test compiling it but as usual I need help on testing.

:)

Nachtfalke

@marcelloc:

Hi Nachtfalke,

I've received a patch from freeradius mainteinet to compile it with heimdal instead of krb5.

I'll test compiling it but as usual I need help on testing.

:)

Of course I'll do that :)

But help me - I forgot it - what will heimdal improve/change instead of using kerberos ? ???

marcelloc

@Nachtfalke:

what will heimdal improve/change instead of using kerberos ? ???

Some pages ago, to get kerberos working, we need to force heimdal(A popular BSD-licensed implementation of Kerberos 5) package install.

zlyzwy

@Nachtfalke

The issue about VM is not woking with CP. I think I had found a solution here.

In the past, VM is running a Debian and I assigned the IP in manual.

allow-hotplug eth0
iface eth0 inet static
address 192.168.1.25
netmask 255.255.255.0
gateway 192.168.1.1

Today, I tired to let Debian get the IP from PF's DHCP and then add its MAC to pass list.

auto lo eth0
iface lo inet loopback
iface eth0 inet dhcp

Then it works. Both the host and VM can access the Internet without any trouble.

I will do some further testing later and post the result here.
;)

Nachtfalke

@zlyzwy

Thanky for feedback and nice to hear that :D
But we both thought that it probably would be a problem of VMware/interfaces and not directly CP and/or freeradius2.

Nachtfalke

Updates pkg v1.5.8:

Added: option to disable weak EAP types for authentication
Added: some checks if it is really neccessary to create new DH and random file
Fixed: description in EAP

zlyzwy

@Nachtfalke

I double checked that the CP is now working with VM and host. :)

There is only one condition : use pass-through MAC in CP

If I tried the RADIUS MAC authentication (MAC as username;share secret as password), it will not work..

It's not a big trouble for me because I just wanna to add a few MACs to pass list, and I don't need to manage them with FreeRadius.

Furthermore I did some other basic testing, they all seems to be no problem.
I created the test user in FreeRadius, it's woking properly.
I created the Vouchers in CP and it will work, FreeRadius will also log it. Great.
(note: I found if I need to use Vouchers , I must disable 'Reauthenticate connected users every minute'. Otherwise the client will have to input the code every minute)

I will go online this hotspot soon and give a feed here.

Great thanks for your help and the package~

valshare

Hi,

can´t update to latest package:


Checking for package installation... 
 Downloading http://e-sac.siteseguro.ws/packages/8/All/freeradius-2.1.12.tbz ...  could not download from there or http://ftp2.FreeBSD.org/pub/FreeBSD/ports/i386/packages-8.1-release/All/freeradius-2.1.12.tbz.
of freeradius-2.1.12 failed!

Regards, Valle

Nachtfalke

@valshare:

Hi,

can´t update to latest package:


Checking for package installation... 
 Downloading http://e-sac.siteseguro.ws/packages/8/All/freeradius-2.1.12.tbz ...  could not download from there or http://ftp2.FreeBSD.org/pub/FreeBSD/ports/i386/packages-8.1-release/All/freeradius-2.1.12.tbz.
of freeradius-2.1.12 failed!

Regards, Valle

I'll contact my administrator marcelloc that he should fix his server problem :P

blasterreal

@valshare:

Hi,

can´t update to latest package:


Checking for package installation... 
 Downloading http://e-sac.siteseguro.ws/packages/8/All/freeradius-2.1.12.tbz ...  could not download from there or http://ftp2.FreeBSD.org/pub/FreeBSD/ports/i386/packages-8.1-release/All/freeradius-2.1.12.tbz.
of freeradius-2.1.12 failed!

Regards, Valle

The same problem goes for me…
I hope that improves as soon as possible

marcelloc

Sorry guys,

Just contacted my provider, they are fixing it right now.

valshare

working again. Thanx!

eri--

Why do you use your own site to host things marcelloc?

marcelloc

ermal,

Freeradius2 conflicts with current compiled version available on files.pfsense.org.

We are also testing many different package compilations until whe find a final solution to publish on files.pfsense.org.(asterisk, dansguardian, subversion,…)
Also there are some missing libs to get cyrus-sasl working to(You helped me diagnosing it on postfix thread).

But, if I can have a folder on files.pfsense.org I can publish these packages there ;D

pszafer

okay, I'm finally happier :)
I've got working freeradius + winbindd + ntlm_auth with Active Directory with MSCHAP v2

now I will remove from samba package as much as I can and then I would like to share my work with you.
I hope you will guide me if I should give you files or somehow make package etc.