Strange configuration loss on 2.0.1 - SSD Problem?
-
Hi,
today i had a strange issue on a SSD re-installed pfSense 2.0.1.
First of all these packages were installed and it was a new install with restore from a backup config.xml via the web interface:
1. squid
2. squidguard
3. havp antivirus
4. openvpn client exporterI configured everything in firewall, openvpn, squid, squidguard, 2 opt interfaces, ipsec tunnels and much more. Everything worked fine. I realized that i have forgotten to set the periodic connection reset on the wan interface. I configured it to reset at 00:00 o clock every day an after a click on save, the wan interface reconnects and the Webinterface did a lag, or reset of the lan interface too… I dont know.
After that i was back on the Webinterface, but at a configuration point 30 or 45 minutes ago! nearly at the first config restore point.
Did anybody have a clue what issue that could be? Failed SSD?
Thanks in advance
Updated typo: periodic reset on wan interface
-
pfsense will kill your ssd
http://forum.pfsense.org/index.php?topic=34381.0
http://hardforum.com/showthread.php?t=1653129 -
What does Diag>Backup/restore, Config history tab look like? Anything in the system log?
pfsense will kill your ssd
No it won't. If you're getting anywhere near the stated write limits on a SSD, it'll take several years at least running a full install.
If you want to be on the safe side, only use nanobsd on SSD.
-
I have an image of this installation, so i can take a look into the log files later today. We changed the ssd to be secure.
-
Due to the system log 500 kbyte limit and there was one reboot so there is nothing in the logs anymore. The config history has nothing stored before the issue. I think it is too late for troubleshooting. Next time i will check these things asap. Thanks anyway!