Successful Install on Watchguard Firebox X700!

m4f1050

SerialBandAid.sh is the 1st thing I do when installing pfSense on Firebox X-core series. I messed up 2 installs to where I couldn't longin the box at all, and console would have saved me in these 2 occasions, so that's my #1 step! Thanks to the author!

drdyno

Well I have my firebox x500 up and running. I found one of the easiest things to do was install 1.2.3 then use the webconfig to upgrade to 2.0.1 and then install the lcd-proc.

Only thing left on my list is the LED fix.

JB

m4f1050

Search for WGXepc app. For x500 use -l green or -l red
(WGXepc -l green_flash and WGXepc -l red_flash are too fast for my taste, you would have to use writeio for slow flashing)

stephenw10

I just resurrected my X-Core box with tape and glue.
Last time I had one running it was with 1.2.3 and the serial port worked fine. Now I find with 2.0.1 it doesn't work after the bootup has finished as described by many others.
I have found this to be completely effective.
Add the following lines to /boot/loader.conf.local create the file if it doesn't exist. This file is copied across firmware updates.


console="comconsole"
comconsole_speed="115200"

This will, as you probably guessed, change your console speed to 115200 so remember to change your settings. Putting 9600 in for speed doesn't work! No idea why not. :-\

Steve

m4f1050

Thanks for posting this. 9600 worked for me, but I switched mine to 115200 as well. It helped avoid the BSOD on my adapter.

stephenw10

No problem. :)
Interesting that 9600 worked for you. I've been playing around with 2.1, I could have got confused.
The new WGXepc has a choice of flashing speed for the X-Core box, might be more to your liking. ;)

Steve

m4f1050

Cool! Got a link to it?

stephenw10

Yes, sorry, it's here.

Steve

atrueresistance

Hey just to let you all know I picked up a cheap firebox x700 and got 2.0.1 running on it. I would like to thank stephen and the other members for helpful forum posts. I've created a tutorial on how I did it. http://simplyaccomplished.com/tutorials/firebox/index.php?view=1

m4f1050

@stephenw10:

Yes, sorry, it's here.

Steve

Got it! Thanks again! :) Very happy with my FB, only thing is I had to remove LCDd (lcdproc) it was crashing the webgui and the sshd but it kept working, and without it the lcd light stays on all the time so I unplugged the lcd. Any way of turning the light off?

stephenw10

I take it you were using the lcdproc-dev package? Which version? 0.93 has eliminated most of the bugs, including the one that locked you out of the web and ssh interfaces. Still a bit of tweaking to go though.
You can fall back to the old manually installed driver here.
Alternatively you can manually turn off the back light by ~~setting bit 1 at 0x379 to 0~~ like this.

Steve

Edit: Wrong data! The backlight is controlled by the strobe pin on the control port which is bit 1 at 0x37a. But it's inverted so to turn off the backlight you need to set it to 1!


[2.0.1-RELEASE][root@x-core.localdomain]/root(9): /conf/writeio 0x037a 0x01
Setting 37a to 1

peterclark4

@stephenw10:

I just resurrected my X-Core box with tape and glue.
Last time I had one running it was with 1.2.3 and the serial port worked fine. Now I find with 2.0.1 it doesn't work after the bootup has finished as described by many others.
I have found this to be completely effective.
Add the following lines to /boot/loader.conf.local create the file if it doesn't exist. This file is copied across firmware updates.
console="comconsole"
comconsole_speed="115200"
This will, as you probably guessed, change your console speed to 115200 so remember to change your settings. Putting 9600 in for speed doesn't work! No idea why not. :-\

Steve

Many thanks Steve, I can confirm that this fails for me on 9600 but works on 115200.

m4f1050

Did you guys try setting the baud rate under device manager and on putty? Also if you boot to BIOS on the FB you can set the baud rate but not sure if you have to. But….why go 9600 when u can go 115200? :)

m4f1050

@stephenw10:

I take it you were using the lcdproc-dev package? Which version? 0.93 has eliminated most of the bugs, including the one that locked you out of the web and ssh interfaces. Still a bit of tweaking to go though.
You can fall back to the old manually installed driver here.
Alternatively you can manually turn off the back light by setting bit 1 at 0x379 to 0 like this.

Steve

Cool! Exactly what I need. Maybe this could be added to WGXepc for those that don't want to run LCDproc.. I need to setup a FreeBSD 8.1 so I can compile & stuff… Right now I have 2 things running while booting: serialbandaid.sh and WGXepc

stephenw10

Try this. ;)

The two comconsole lines replace the serialbandaid script but will only run at speeds other than 9600. If you have both that probably explains why you were able to get 9600 to work.

Steve

WGXepc.c.png
WGXepc.png

m4f1050

@stephenw10:

Try this. ;)

The two comconsole lines replace the serialbandaid script but will only run at speeds other than 9600. If you have both that probably explains why you were able to get 9600 to work.

Steve

Awesome! Thanks! Will be using -b off :)

m4f1050

Steve, kinda off topic, but where is the first place I can run WGXepc to turn off the LCD backlight? I currently have it in /etc/rc but if there is a sooner place to run it please let us know :) Thanks!

Back to topic, I got my TP-Link 802.11n card in today and installed it on my X700! Bridged it with my LAN as stated here and I have all working. I can now ditch my Belkin wireless router! WOOT! For all of you that wish to do this you will need a pci 32-bit riser (done with ribbon cable),the TL-WN851N adapter and 2 x 50cm RP-SMA cable extensions (all from eBay)

http://www.ebay.com/itm/350261953704

http://www.ebay.com/itm/260816216698

http://www.ebay.com/itm/400182656252

Took about 5 days to get adapter and pci riser but extensions come from Hong Kong, still waiting on the extension cables, but worth it, specially when pfSense upgrades to FreeBSD 9 (which should support 802.11n)

Watchguard Firebox X700
512mb PC133 REG ECC
2gb CF card
pfSense 2.0.1
TP-Link TL-WN851N 802.11n
(still looking for drive that plugs into X700!)

KrPacMan

@m4f1050:

Back to topic, I got my TP-Link 802.11n card in today and installed it on my X700! Bridged it with my LAN as stated here and I have all working. I can now ditch my Belkin wireless router! WOOT! For all of you that wish to do this you will need a pci 32-bit riser (done with ribbon cable),the TL-WN851N adapter and 2 x 50cm RP-SMA cable extensions (all from eBay)

Watchguard Firebox X700
512mb PC133 REG ECC
2gb CF card
pfSense 2.0.1
TP-Link TL-WN851N 802.11n
(still looking for drive that plugs into X700!)

1. Do you think a generic PCI riser card from a standard 1U chassis would work?
2. Do you know if the unit supports larger 512 MB/1 GB/2 GB PC133 ECC memory modules?

m4f1050

@Kr^PacMan:

1. Do you think a generic PCI riser card from a standard 1U chassis would work?
2. Do you know if the unit supports larger 512 MB/1 GB/2 GB PC133 ECC memory modules?

1.Aren't generic PCI risers to the right of the case looking at it from the front of the firebox? The PCI is towards the front in the FB instead of towards the back, you would also have to remove the hd carrier cage if using a 90 deg. riser card that turns the opposite direction.

2. Unfortunately it is a hit/miss situation on the memory but my 512mb posted, maybe we should start a thread with compatible memory sticks (and maybe include pic?)

stephenw10

The 815 chipset supports a maximum of 512MB per DIMM slot. Since the X-Core only has one slot that's the limit.

As mentioned the PCI slot is reversed to the direction you might expect. Though you could argue the whole board is reversed since the connections are all on the front.

Steve

Edit: Actually it looks like 512MB is the limit no matter how many slots you have:
http://download.intel.com/design/chipsets/datashts/29068801.pdf
Though it also says in there that 256MB DIMMs are the maximum but we know 512MB works.