Dansguardian package for 2.0

dvserg

Try remove dansguardian and look exists packages from console - pkg_info
If any clam package exist, you must delete it's manually - pkg_delete full_pkg_name

Can exist clam AV from havp pkg.

Then install dansguardian new.

marcelloc

Not sure why the value is different, maybe havp changed it?

Maybe. Try uninstalling clamav after havp just like dvserg told you.

If I have some time this week I'll try to check havp clamav config and make dansguardian compatible to it.

mschiek01

I've had this same problem never was able to get it to work. I think the issue occurs when postfix is installed allong with dansguardian.

marcelloc

Hi mschiek01,

Postfix and dansguardian with clamav can work together, this setup I've tested sucessfully.

Can you post your pfsense version?
Did you tried a full clamav uninstall as described on previous post?
This way I can simulate the problem.

mschiek01

2.0.1-RELEASE (i386)

I did try full uninstall no luck. I need to take a look and see if havp and all its components were removed on the deinstall.

mschiek01

@marcelloc:

Hi mschiek01,

Postfix and dansguardian with clamav can work together, this setup I've tested sucessfully.

Can you post your pfsense version?
Did you tried a full clamav uninstall as described on previous post?
This way I can simulate the problem.

I did get it to work. Here is what I did:
Uninstall, postfix, dansguardian & mailscanner
reinstall HAVP
uninstall HAVP & deleted havp user
reinstall postfix, mailscanner, dansguardian
Trying to just pkg_delete the clamv packages was showing errors concerning the packaged deletion.

Stopped working again with "error connecting to clam d socket"

marcelloc

The way I did:

Clean install
Postfix
Mailscanner
Dansguardian

I'll do it again this week to test.

Cino

still have a lot more testing with SSL man-in-middle but when I try to access https sites, i'm getting the danguardian denied page "Certificate supplied by server was not valid"

still have to check logs and read the docs from danguardian site on this feature.

marcelloc

I'm on the same point.

I did not found anything usefull on internet.

This is a most wanted experimental and non documented feature ever. :(

tesna

@mschiek01:

@marcelloc:

Hi mschiek01,

Postfix and dansguardian with clamav can work together, this setup I've tested sucessfully.

Can you post your pfsense version?
Did you tried a full clamav uninstall as described on previous post?
This way I can simulate the problem.

I did get it to work. Here is what I did:
Uninstall, postfix, dansguardian & mailscanner
reinstall HAVP
uninstall HAVP & deleted havp user
reinstall postfix, mailscanner, dansguardian
Trying to just pkg_delete the clamv packages was showing errors concerning the packaged deletion.

Stopped working again with "error connecting to clam d socket"

check the config file make sure it points to the right clamd socket. In this case on mine the on the /usr/local/etc/clamd.conf clamd socket is located on /var/run/clamd.sock

So I edited the /usr/local/etc/dansguardian/contentscanners/clamdscan.conf to make sure it points to the right location: In mine I change it to:


# edit this to match the location of your ClamD UNIX domain socket
clamdudsfile = '/var/run/clamd.sock'

Now the dansguardian + av content scanner is working great! I've test it to download eicar test file signature and it detects the signature.

However, I have additional question. I've set the proxy server to dansguardian port in the browser config file on http, ftp and https. But it seems dansguardian does not scan https protocol. Is that normal?

marcelloc

It will scan https url and domains only until whe find a way to create "valid" men-on-the-middle certs.
The point is That dansguardian 2.12 is the first release with full ssl filtering support But it is on experimental stage and not documented at all. We could compile it with ssl and also patched dansguardian-devel ports to help bsd users to get it working.

If you want to test or reach the same point we(cino and me) are, go on system cert manager, create a CA certificate and a server certificate using this ca. On dansguardian, apply these certificares on second tab and finally enable ssl filtering option on groups tab.

svtlightning

Are there any issues getting this to work with a carp interface. Works fine with LAN but trying to get it working with CARP.

marcelloc

listen dansguardian on loopback and create a nat rule from your virtual ip to 127.0.0.1

tesna

@marcelloc:

It will scan https url and domains only until whe find a way to create "valid" men-on-the-middle certs.
The point is That dansguardian 2.12 is the first release with full ssl filtering support But it is on experimental stage and not documented at all. We could compile it with ssl and also patched dansguardian-devel ports to help bsd users to get it working.

If you want to test or reach the same point we(cino and me) are, go on system cert manager, create a CA certificate and a server certificate using this ca. On dansguardian, apply these certificares on second tab and finally enable ssl filtering option on groups tab.

I have same problem with Cino mentioned when using SSL filtering, the dansguardian itself reject/block the site since the certificate is not valid. I thought the client's browser will warns the user about invalid certificates (I've used astaro gateway before) then the user can choose to continue. Maybe since this very experimental stage it does not work well yet.

On another note, a little bit out of topic. I've used proxy.pac and wpad.dat to autoconfigure the proxy settings on the client computers. I put proxy.pac, wpad.dat and wpad.da on local webserver on the network and assign wpad dns name to that particular webserver. This is working fine for most of the computers, most computers connect though the proxy automatically.

However it seems not all client using the proxy settings so when I block outgoing port 80 some client just can't connect to the internet. I've checked the settings and I'm sure all settings is the same (Auto detect settings are ticked). So I did NAT to redirect outgoing port 80 from the internal network to the dansguardian port and its working fine and making sure all clients browse thru the filter.

But with this method I have little trouble bypassing the filter for some host. On the pfsense squid configuration menu it has the option to enable transparent proxy and select exception list of IP are permitted to bypassing the proxy. I'm not sure how to do it on using NAT rule.

EDIT: one more thing. If using wpad/proxy.pac config it will bypass captive portal. Users can browse the internet but can't check emails on outlook since the ports are blocked by the captive portal, cannot login to captive portal too since it nevers shows the login page. If I did not use proxy/wpad thing (connect directly and use port redirection (transparent) the captive portal is working properly). I guess this is the drawback using wpad/proxy auto config.

mschiek01

@tesna:

@mschiek01:

@marcelloc:

Hi mschiek01,

Postfix and dansguardian with clamav can work together, this setup I've tested sucessfully.

Can you post your pfsense version?
Did you tried a full clamav uninstall as described on previous post?
This way I can simulate the problem.

I did get it to work. Here is what I did:
Uninstall, postfix, dansguardian & mailscanner
reinstall HAVP
uninstall HAVP & deleted havp user
reinstall postfix, mailscanner, dansguardian
Trying to just pkg_delete the clamv packages was showing errors concerning the packaged deletion.

Stopped working again with "error connecting to clam d socket"

check the config file make sure it points to the right clamd socket. In this case on mine the on the /usr/local/etc/clamd.conf clamd socket is located on /var/run/clamd.sock

So I edited the /usr/local/etc/dansguardian/contentscanners/clamdscan.conf to make sure it points to the right location: In mine I change it to:
# edit this to match the location of your ClamD UNIX domain socket
clamdudsfile = '/var/run/clamd.sock'
Thanks my configuration was the same. I made the change and it is working now.

Now the dansguardian + av content scanner is working great! I've test it to download eicar test file signature and it detects the signature.

However, I have additional question. I've set the proxy server to dansguardian port in the browser config file on http, ftp and https. But it seems dansguardian does not scan https protocol. Is that normal?

Cino

think there may be a permission issue with clamav… It doesnt start when i reboot the box. This is what I get when I manually start the process:


./clamav-clamd start
mkdir: /var/run/clamav: File exists
Starting clamav_clamd.
ERROR: Can't open /var/log/clamav/clamd.log in append mode (check permissions!).
ERROR: Can't initialize the internal logger
./clamav-clamd: WARNING: failed to start clamav_clamd

the permissions for the files are 0644, wheel/root
when i change it to 777, its able to start

marcelloc

Cino,

If you apply dansguardian config after reboot it fixes the permission?

Cino

@marcelloc:

Cino,

If you apply dansguardian config after reboot it fixes the permission?

It has not in the past.. I'll test again but I had to reboot my box yesterday… then i disabled the ssl man-in-middle(would be a apply to dansguardian) and had to manually set the permissions

marcelloc

Ok, I'll check it and socket file location

dig1234

@Cino:

still have a lot more testing with SSL man-in-middle but when I try to access https sites, i'm getting the danguardian denied page "Certificate supplied by server was not valid"

still have to check logs and read the docs from danguardian site on this feature.

I am at the same point with ssl mitm. I found in the dansguardianf1.conf file there are two options:
one for mitm (sslmitm = on) and one for cert checking (sslcertcheck = off), however even with cert checking off, I'm still getting that message:
"Certificate supplied by server was not valid"
So either that option is not sticking or I'm missing something. I had a thought of actually feeding the cert checking function with all the trusted root certs from a popular browser. According to dansguardian.conf they should be placed in '/etc/ssl/certs/' though I'm not sure what format or exactly how to batch export them all… Thoughts?