OpenOSPFd routes not in routing table (Solved)
-
2.0.1-RELEASE (i386)
built on Mon Dec 12 19:00:03 EST 2011FreeBSD 8.1-RELEASE-p6
OpenOSPFd doesnt add routes to routing table.
Have a wan link via ath0 neighbour up
OpenOSPFd Neighbors
ID Pri State DeadTime Address Iface Uptime
192.168.0.1 1 FULL/DR 00:00:34 192.168.0.1 ath0_wlan0 00:03:04Type 5 Link States 192.168.0.3 is itself
Type-5 AS External Link States
Link ID Adv Router Age Seq# Checksum
1.1.1.0 192.168.0.1 627 0x80000001 0x3350
1.1.1.1 192.168.0.1 627 0x80000001 0x2959
2.2.2.0 192.168.0.3 191 0x80000001 0x037b
2.2.2.1 192.168.0.3 191 0x80000001 0xf884
192.168.0.1 192.168.0.1 627 0x80000001 0x9b80
192.168.0.3 192.168.0.3 191 0x80000001 0x7b9c[2.0.1-RELEASE][admin@pfsense.localdomain]/(20): netstat -rn
Routing tablesInternet:
Destination Gateway Flags Refs Use Netif Expire
2.2.2.0/24 link#1 U 0 5535 vr0
2.2.2.1 link#1 UHS 0 1 lo0
127.0.0.1 link#5 UH 0 130 lo0
192.168.0.0/24 link#8 U 0 1910 ath0_w
192.168.0.3 link#8 UHS 0 2 lo01.1.1.1 Route missing
[2.0.1-RELEASE][admin@pfsense.localdomain]/(21): pkg_info openospfd-4.6
Information for openospfd-4.6:Comment:
Free implementation of the Open Shortest Path First ProtocolDescription:
OpenOSPFD is a FREE implementation of the Open Shortest Path First Protocol.
It allows ordinary machines to be used as routers exchanging routes with
other systems speaking the OSPF protocol.WWW: http://www.openbgp.org/
- Florent Thoumie
flz@xbsd.org
- Florent Thoumie
-
Hahaha i stupidly had RIP enabled on one side of the link causing it to do silly things.
After disabling
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
1.1.1.0/24 192.168.0.1 UG2 0 553 ath0_w
1.1.1.1/32 192.168.0.1 UG2 0 75 ath0_w
2.2.2.0/24 link#1 U 0 1081 vr0
2.2.2.1 link#1 UHS 0 0 lo0
127.0.0.1 link#4 UH 0 55 lo0
192.168.0.0/24 link#7 U 0 4 ath0_w
192.168.0.1/32 192.168.0.1 UG2 0 11 ath0_w
192.168.0.3 link#7 UHS 0 0 lo0Move along nothing to see here :-\
-
I have the same problem
OpenOSPFd Neighbors
ID Pri State DeadTime Address Iface Uptime
10.0.0.13 1 FULL/P2P 00:00:33 10.0.2.2 ovpns2 14:58:11
10.0.0.13 1 DOWN/P2P 14:54:41 10.0.1.2 ovpns1 -OpenOSPFd Neighbors ID Pri State DeadTime Address Iface Uptime 10.0.0.13 1 FULL/P2P 00:00:33 10.0.2.2 ovpns2 14:58:11 10.0.0.13 1 DOWN/P2P 14:54:41 10.0.1.2 ovpns1 - OpenOSPFd FIB flags: * = valid, O = OSPF, C = Connected, S = Static Flags Prio Destination Nexthop *C 0 10.0.0.4/30 link#7 *C 0 10.0.0.5/32 link#3 *C 0 10.0.0.8/30 link#8 *C 0 10.0.0.9/32 link#3 *S 0 10.0.0.16/30 10.0.0.10 *C 0 10.0.1.1/32 link#3 *C 0 10.0.1.2/32 link#10 *C 0 10.0.2.1/32 link#3 *O 0 10.1.8.0/24 10.0.2.2 *O 0 10.1.8.1/32 10.0.2.2 *C 0 10.1.9.0/24 link#9 *C 0 10.1.9.1/32 link#3 *C 0 127.0.0.1/8 link#0 *C 0 127.0.0.1/32 link#3 *C 0 192.168.8.0/24 link#1 *C 0 192.168.8.127/32 link#3 OpenOSPFd RIB Destination Nexthop Path Type Type Cost Uptime 10.0.0.13 10.0.2.2 Intra-Area Router 10 14:58:11 10.0.1.1/32 10.0.2.2 Intra-Area Network 20 14:58:11 10.0.2.1/32 10.0.2.2 Intra-Area Network 20 14:58:01 10.1.8.0/24 10.0.2.2 Type 1 ext Network 110 14:58:11 10.1.8.1/32 10.0.2.2 Type 1 ext Network 110 14:58:11
IPv4 Destination Gateway Flags Refs Use Mtu Netif Expire 10.0.0.4/30 link#7 U 0 63468 1500 age0_vlan4 10.0.0.5 link#7 UHS 0 0 16384 lo0 10.0.0.8/30 link#8 U 0 63468 1500 age0_vlan8 10.0.0.9 link#8 UHS 0 0 16384 lo0 10.0.0.16/30 10.0.0.10 UGS 0 19176 1500 age0_vlan8 10.0.1.1 link#10 UHS 0 0 16384 lo0 10.0.1.2 link#10 UH 0 8388 1500 ovpns1 10.1.9.0/24 link#9 U 0 7859 1500 age0_vlan91 10.1.9.1 link#9 UHS 0 0 16384 lo0 127.0.0.1 link#3 UH 0 925 16384 lo0 192.168.8.0/24 link#1 U 0 94874 1500 age0 192.168.8.127 link#1 UHS 0 0 16384 lo0
-
I dont enable RIP. But i have same problems when one of links to neighbors is down.