PPPoE server in PfSense 2.0RC1 - trouble with gateway
-
Hi all,
i'm a PfSense half-newbie and i'm using 2.0RC1 version updated because i have to use Layer7 and traffic shaping.
I need to configure a PPPoE server w/o Radius server.
This is my network configuration:WAN: public IP (1.2.3.4)
LAN: private IP (192.168.1.1)I've created a PPPoE configuration:
Interface: LAN
Subnet: 24
No. PPPoE users: 10
Server address: 192.168.10.1
Remote address range: 192.168.100.1I've also created a test user with pre-assigned IP (192.168.100.150).
This configuration works as PPPoE. The user (with Windows 7) invoke PPPoE server using Microsoft PPPoE client and Windows 7 receive the IP (192.168.100.150) and DNS (the public DNS and the private DNS -192.168.1.1-).
But, strange but true, the gateway.What i have to do ?
-
I've tried to make a PPPoE server with PfSense 1.2.3 (as described here: http://opuntia.biz/2011/04/02/configurazione-di-un-server-pppoe-su-pfsense/).
I've tried too to make the same steps in PfSense with no result.
I suppose that the problem is on 2.0RC1 firewall or Nat rule.
Do you have experience with PPPoE Server working and PfSense 2.0RC1 ? -
There is an open ticket for the PPPoE server in 2.0 right now because it's not 100% working. The firewall rules aren't properly added yet. It's a known issue. (And there are other threads already open for it as well)