Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Installing on a Firebox X700

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    108 Posts 7 Posters 45.5k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S Offline
      stephenw10 Netgate Administrator
      last edited by

      Are you getting a phsical connection on the LAN2 interface?(the leds lighting up when you plug in the client). I only ask because on my box I had to put a switch in between the firebox and any client computers. Hard to beleive but I think the X-Core may be old enough that it doesn't has auto MDIX.

      Dont give up now after 5 pages!  :D

      Steve

      1 Reply Last reply Reply Quote 0
      • G Offline
        GOBIGRED
        last edited by

        this is weird to me so i tried using 192.168.2.0 for the lan it didnt work and used the 192.168.1.1 and i can plug stuff in and it works do you know why? also by using the 192.168.1.0 range when i install wifi is this gonna cause problems?

        1 Reply Last reply Reply Quote 0
        • stephenw10S Offline
          stephenw10 Netgate Administrator
          last edited by

          Each interface must use a different subnet. The usual subnet is /24 (subnet mask 255.255.255.0). If you are using a /24 (you are) then 192.168.1.1 and 192.168.1.0 both in the same subnet.

          You can add you access point to the LAN, just connect it to the switch, and that will be no problem. However you may want it on a separate interface for better security.

          Adding an extra interface should be relatively easy.

          Steve

          1 Reply Last reply Reply Quote 0
          • G Offline
            GOBIGRED
            last edited by

            yes sorrry typed wrong why would the 192.168.1.1 allow me to the internet but not the 192.168.2.1? aloso when i log in it says unable to update? Did the name change for the update site?

            1 Reply Last reply Reply Quote 0
            • G Offline
              GOBIGRED
              last edited by

              was playing with it AGAIN tonight and trying to get wifi set up, no luck i thinks its because it overlaps with the 192.168.1 X network so i need to figure out how to configure another lan for wifi and use the 192.168.1.X for stuff that doesnt need a public ip? AM I correct?

              1 Reply Last reply Reply Quote 0
              • stephenw10S Offline
                stephenw10 Netgate Administrator
                last edited by

                I'm not sure how you have your wifi access point connected and configured but yes you need it on a different subnet if you are connecting it to a different interface. It doesn't matter which subnet you give to each interface as long as they are different.

                @GOBIGRED:

                yes sorrry typed wrong why would the 192.168.1.1 allow me to the internet but not the 192.168.2.1?

                If when you connect your client to the new interface you receive an IP but can't get internet access it's very likely that you have not configured a firewall rule on that interface to allow it.
                Look at the default rule on the LAN interface. Copy that rule to LAN2 but change references to LAN to LAN2.
                This will give a very permissive connection (everything is allowed out) but you can always change that later.

                Steve

                1 Reply Last reply Reply Quote 0
                • G Offline
                  GOBIGRED
                  last edited by

                  Steve,
                  Thank you so much for kindly helping a newbie!! Things are up and running great thanks to your help!!!Now time to do some learning!!!

                  1 Reply Last reply Reply Quote 0
                  • G Offline
                    GOBIGRED
                    last edited by

                    ohhh,  :D
                    one more quick question is there a fix for the led lights mine are orange and red?

                    Thanks

                    1 Reply Last reply Reply Quote 0
                    • G Offline
                      GOBIGRED
                      last edited by

                      just noticed this error when trying to update
                      """"Downloading new version information…done
                      Unable to check for updates.
                      Could not contact pfSense update server http://updates.pfsense.org/FreeBSD_RELENG_8_1/i386/pfSense_RELENG_2_0/.updaters/""

                      Is there a fix for this?

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S Offline
                        stephenw10 Netgate Administrator
                        last edited by

                        Check you have the correct update URL.
                        Go to System: Firmware: Settings: and select pfSense i386 stable updates from the drop down.
                        It should then say: http://updates.pfsense.org/_updaters in the base URL box.
                        Save the setting.

                        The arm/disarm LED can be controlled, I wrote a program to do it.  ;D
                        You can read about my efforts in this thread.
                        Download the most recent version from this post. Remove the .png extension from it, that's just so the forum will accept it.
                        Now you need to copy it to somewhere permanent on your firebox and make it run at boot up with whatever LED setting you require.
                        There are a number of ways to do this but here's what I do.
                        Connect to your firebox console (via serial or ssh) and type:

                        
                        /etc/rc.conf_mount_rw
                        

                        This will allow you to write the file, by default the filesystem in read only.
                        Now copy WGXepc to /conf, I use WinSCP to do this. Normally you wouldn't ever put anything in /conf but WGXepc is a very small file and /conf survives a firmware update.
                        Change the file permissions so it is executable, you can do that in WinSCP or using chmod at the console.
                        Now at the console type:

                        echo '/conf/WGXepc -l green' > /usr/local/etc/rc.d/WGXepc.sh
                        

                        This will create the file WGXepc.sh in /usr/local/etc/rc.d which is run at boot. Make sure it's file permissions are set to excecutable:

                        chmod 0755 /usr/local/etc/rc.d/WGXepc.sh
                        

                        Now remount the file system back to read only:

                        
                        /etc/rc.conf_mount_ro
                        

                        You can experiment with the different LED settings, if you call the program with no arguments it gives some help.

                        fmertz is currently incorporating the led code into the lcd driver so we should soon have this all packaged nicely. That will also open the possibility of using the LED to indicate something useful.

                        Steve

                        Edit: If someone wants to tell me a better location that survives a firmware update I'm open to suggestions!  ;)

                        1 Reply Last reply Reply Quote 0
                        • G Offline
                          GOBIGRED
                          last edited by

                          Do you have a idea when the package is going to come out?
                          Im still having troube with your last post!!

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S Offline
                            stephenw10 Netgate Administrator
                            last edited by

                            @GOBIGRED:

                            Do you have a idea when the package is going to come out?

                            When it's ready!  ;)

                            You keep an eye on this thread for updates. In this post fmertz has the new test driver with led support. There's no GUI option yet. Unfortunately my X-Core box has died completely and no longer posts (I think one of the capacitors has died) so I can't test it.

                            Which part of my previous post are you having trouble with?

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • G Offline
                              GOBIGRED
                              last edited by

                              I just got one that had the same problem i found them on ebay real cheap and replaced them its very easy, i would reccomend that you try to fix it for the 10 bucks instead of buying a new one lol!! What models of the FB do you have?

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S Offline
                                stephenw10 Netgate Administrator
                                last edited by

                                @GOBIGRED:

                                What models of the FB do you have?

                                I keep an eye on Ebay UK for cheap boxes. I use an X-Peak box (X6000) as my main firewall here and also have an X750 and an X5500. I'll have to try changing the caps on the X500. None of them look bad though, other bad caps I've had had stuff leaking from them or at least bulging tops.  :-\

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • G Offline
                                  GOBIGRED
                                  last edited by

                                  Steve,
                                  Im now looking for a peak box do you know the diffrent x core peak models?

                                  And is there any word on the package:fmertz is currently incorporating the led code into the lcd driver so we should soon have this all packaged nicely. That will also open the possibility of using the LED to indicate something useful.?

                                  Thanks

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S Offline
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    The X-Peak had three models: X5000, X6000 and X8000.
                                    See: http://www.watchguard.com/products/peak.asp
                                    I don't know how many Watchguard sold in relation to the X-Core but it must have been a low ratio, they hardly ever come up on Ebay.

                                    No news on the driver I'm afraid though I just aquired a replacement X-Core for some more testing.

                                    Steve

                                    1 Reply Last reply Reply Quote 0
                                    • G Offline
                                      GOBIGRED
                                      last edited by

                                      Ok thanks does pfsense had built in wireless? If so what firebox do i cant seem to find any info?

                                      Thanks

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S Offline
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        pfSense supports any wifi card that is supported by FreeBSD 8.1 (2.0.1) or 8.3 (2.1). That is a lot of cards but it's not as good as wifi support in Linux. For example there is no support at all for 802.11N.

                                        I'm running an Atheros 2413 based mini-PCI card as an access point in my X-Peak.

                                        None of the Watchguard X86 based hardware had wifi built in.

                                        Steve

                                        1 Reply Last reply Reply Quote 0
                                        • G Offline
                                          GOBIGRED
                                          last edited by

                                          I have a on WAN 3 LAN config how do allow the LAN's to talk to each other?

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S Offline
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            You have to add firewall rules (or modify the existing rules) to allow access between LANs.
                                            For example the default rule on the LAN interface is Source: LAN net and Destination: any. This destination, any, includes all your other subnets on other interfaces so traffic can reach them. This default rule doesn't exist on any other interfaces so you have to add it.

                                            Steve

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.