Varnish help on setting up for multiple internal webservers

[kegler]

@marcelloc:

What about pkg_info cmd?

What does returns /usr/local/etc/rc.d/varnish.sh start

sorry what is the cmd to check the above ?

[kegler]

[2.0-RELEASE][admin@kegpfs.kegnet.com]/usr/local/etc/rc.d(6): varnish.sh start
varnish.sh: Command not found.

seems something not installed ?

[marcelloc]

Do not chdir to rc.d, Run varnish.sh with full path

[kegler]

@marcelloc:

Do not chdir to rc.d, Run varnish.sh with full path

kern.ipc.nmbclusters: 65536
sysctl: kern.ipc.nmbclusters: Invalid argument
kern.ipc.somaxconn: 16384 -> 16384
kern.maxfiles: 131072 -> 131072
kern.maxfilesperproc: 104856 -> 104856
kern.threads.max_threads_per_proc: 4096 -> 4096

wondering could it be due to my domain is host by no-ip.com?

[kegler]

php: /pkg_edit.php: The command '/usr/local/etc/rc.d/varnish.sh' returned exit code '2', the output was 'kern.ipc.nmbclusters: 65536 sysctl: kern.ipc.nmbclusters: Invalid argument kern.ipc.somaxconn: 16384 -> 16384 kern.maxfiles: 131072 -> 131072 kern.maxfilesperproc: 104856 -> 104856 kern.threads.max_threads_per_proc: 4096 -> 4096 storage_malloc: max size 1024 MB. Message from VCC-compiler: Expected ';' got '/' (program line 369), at (input Line 28 Pos 26) .url = ""/""; –-----------------------#--- In backend specification starting at: (input Line 21 Pos 1) backend kegapp33BACKEND { #######------------------ Running VCC-compiler failed, exit 1 VCL compilation failed'

saw this in my log… but i dont quite understand what went wrong

and i kvm into my pfsense and saw this on the screen.... seems like its stucked at the loading of varnish....

i think i messed up the pfsense somewhere

[marcelloc]

Remove quotes from your backend Test url

.url = ""/"";

[kegler]

omg…it worked now...thank you very much....

[canefield]

@marcelloc:

Each backend means a webserver

inside each configuration, you must provide:

• Backend name = WindowsServer

• Ip Address = 192.168.1.4

• Port = 80 <– Q

• Probe URL = "/"(if your server has a valid page on "/")

• Probe Interval = 5

• Probe Timeout = 1

• Probe window = 5

• Probe Threshold = 3

Q:
Can I enter multiple listening ports e.g. port: "80, 443"? Or should I configure that host several times according to how many ports it is listening on?

Thanks,
Canefield

[marcelloc]

I think you need one port for each config as varnish is going to check backend health as well send traffic based on this port.

Keep in mind That varnish implemets http balance/cache only. If you what to balance https as well, haproxy can do this.

Pound and relayd can do client/firewall ssl comunication and then forward client request to varnish, but there is no gui options for this yet.

[Landmine]

Hate to jump on someone else's thread, but I've gone threw all the same motions, but still no results.

web1.domain.com
web2.domain.com

All end up pointing to the pfSense login, so my question is simply this… What IP do you point the Rule to? the pfSense box that host Varnish?

[marcelloc]

Did you changed  pfsense gui port?
This current varnish gui implementation listens deamon on all interfaces.

[Landmine]

I did now and it works!

Guess next time I need to slow down and read all the helpful text.

Thank you

[Landmine]

Correction, it was working. I didnt change anything and I'm getting the 503 errors again  :(

–---------- Update ------------

I only get the 503 error on 1 of the 2 domains.

------------ Update ------------

Removing the Backend mapping with the http:// on it seemed to fix the issue.

------------ Update ------------

Down again after about 30 seconds.  >:(

[marcelloc]

That's probably a backend health url check problem.

Add varnish widget to dashboard to see backend status.

The 503 error means could not find any available backend.

Also try to see backend configuration file on view configuration.

[Landmine]

Here is my config

# Varnish configuration file
# Automatically generated by the pfSense package system

# This file is located in /var/etc/default.vcl

sub vcl_error {
		if (obj.status == 503 && req.restarts < 1) {
			restart;
		}

	set obj.http.Content-Type = "text/html; charset=utf-8";
	synthetic {"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">

<title>"} obj.status " " obj.response {"</title>

 **We are very sorry but an error occurred during this request.** 

Please press refresh in your browser to try again.

Varnish Error "} obj.status " " obj.response {"

"} obj.response {"

### Guru Meditation:

XID: "} req.xid {"

"};
	return(deliver);

}

backend MinecraftBACKEND {
	# used in catch_all 
	.host = "10.0.0.50";
	.port = "80";
	.first_byte_timeout = 300s;
	.connect_timeout = 25s;
	.probe = {
		.url = "/index.php";
		.interval = 5s;
		.timeout = 3s;
		.window = 5;
		.threshold = 3;
	}
}

sub vcl_recv {

	#BASIC VCL RULES SETTING
	#Fix gzip compression
	if (req.http.Accept-Encoding) {
	if (req.url ~ "\.(gif|jpg|jpeg|bmp|png|ico|img|tga|wmf|gz|tgz|bz2|tbz|mp3|ogg)$") {
		unset req.http.Accept-Encoding;
		}
	else if (req.http.Accept-Encoding ~ "gzip") {
		set req.http.Accept-Encoding = "gzip";
		}
	else if (req.http.Accept-Encoding ~ "deflate") {
		set req.http.Accept-Encoding = "deflate";
		}
	else	{
		unset req.http.Accept-Encoding;
		}
	}
	#set client balance identity
	set client.identity = client.ip;

	#set X-forward
	set req.http.X-Forwarded-For = client.ip;

	if (req.http.host == "minecraft.domain.com") {
		set req.backend = MinecraftBACKEND;
	} 

	#respect client wish to refresh the page
	if (req.http.Pragma ~ "no-cache")
		{
		return(pass);
		}

	#BASIC VCL RULES ACTIONS
	#Disable post cache
	if (req.request == "POST") {
		return(pass);
		}
	#Enable static cache
	if (req.request=="GET" && req.url ~ "\.(css|js|txt|zip|rtf|flv|swf|html|htm)$") {
		return(pass);
		}
	if (req.request=="GET" && req.url ~ "\.(gif|jpg|jpeg|bmp|png|ico|img|tga|wmf|mp3|ogg)$") {
		return(pass);
		}
	#Disable session cache
	if (req.http.Cookie && req.http.Cookie ~ "(PHPSESSID|phpsessid)") {
		return(pass);
		}
	if (req.http.Cookie && req.http.Cookie ~ "(JSESSION|jsession)") {
		return(pass);
		}
	if (req.http.X-Requested-With == "XMLHttpRequest" || req.url ~ "nocache") {
		return(pass);
		}
	#Be rfc2616 compliant
	if (req.request ~ "^(GET|HEAD|PUT|POST|TRACE|OPTIONS|DELETE)$") {
		return(lookup);
		}
	else	{
		return(pipe);
		}

	return(lookup);
}

sub vcl_pipe {

	# If we don't set the Connection: close header, any following
	# requests from the client will also be piped through and
	# left untouched by varnish. We don't want that.
	set req.http.connection = "close";
	# Note: no "pipe" action here - we'll fall back to the default
	# pipe method so that when any changes are made there, we
	# still inherit them.

}

sub vcl_fetch {

	#Disable cache when backend is starting a session
	if (beresp.http.Set-Cookie && beresp.http.Set-Cookie ~ "(PHPSESSID|phpsessid)") {
		return(pass);
		}
	if (beresp.http.Set-Cookie && beresp.http.Set-Cookie ~ "(JSESSION|jsession)") {
		return(pass);
		}
	if (beresp.http.X-Requested-With == "XMLHttpRequest" || req.url ~ "nocache") {
		return(pass);
		}

	# Varnish respects the wishes of the backend application.
	if (beresp.http.Pragma ~ "no-cache" || beresp.http.Cache-Control ~ "(no-cache|no-store|private)") {
	return(pass);
	}
    ## If the request to the backend returns a code other than 200, restart the loop
    ## If the number of restarts reaches the value of the parameter max_restarts,
    ## the request will be error'ed.  max_restarts defaults to 4.  This prevents
    ## an eternal loop in the event that, e.g., the object does not exist at all.
    if (beresp.status != 200 && beresp.status != 403 && beresp.status != 404 && 
    	beresp.status != 303 && beresp.status != 302 && beresp.status != 301 && beresp.status != 401 ) {
		restart;
        }

	return(deliver);
}

sub vcl_deliver {
	##set resp.http.X-Served-By = server.hostname;
  	if (obj.hits > 0) {
    	set resp.http.X-Cache = "HIT";	
    	set resp.http.X-Cache-Hits = obj.hits;
  	} else {
    	set resp.http.X-Cache = "MISS";	
  	}
	return(deliver);
}

[marcelloc]

can you try to access backend test url?

http://10.0.0.50/index.php

Also, what you get on dashboard varnish widget?

[Landmine]

The URL works get when I'm at home and here is a pic of what the widget looks like.

Thank you for taking the time to help me.

[marcelloc]

Varnish could not get this url from your web server.

Can you try an static html, a full http request or something else?

[Landmine]

So far so good. Now if I wanted to add more servers to the list, I'd basically copy the settings and just change the Backend name, IP and Mapping?

[marcelloc]

Yes.  :)

Just don't forget to check backend status on Dashboard.