Dropped from 1000Mbit to 100Mbit
-
Today I reinstalled pfsense, because of squid wasn't uninstalled correctly.
I hade no configuration done at all, so a reinstall seemed the fastest way to go.So, reinstalled with exactly the same configuration.
pfsense says 1000Mbit on WAN and 1000Mbit on LAN, but I can only measure 100Mbit.
Without the pfsense-router it goes up to 200 where it's supose to be.Any ideas?
-
Reinstalled again, reset BIOS but still only 100Mbit.
The NIC is a DualPort Intel Pro 1000Mbit.The card works fine.
Tested both ports in my dekstop = 200mbit
Tested other cables and so on.Only thing left is checking the other hardware, but I don't see why it should have anything to do with this.
Router hardware:
Asus P5N-D
E8600
4Gb DDR2
Intel PRO/1000 PT Dual Port Server Adapter -
Run 'top -SH' at the console while testing your download speed.
Are you running out of CPU for some reason? You shouldn't be with that machine.
Do you have a duplex mismatch between the WAN interface and whatever it's connected to?
Bad cable? Is it exactly 100Mbps? Seems suspicious. :-\Steve
-
Run 'top -SH' at the console while testing your download speed.
Are you running out of CPU for some reason? You shouldn't be with that machine.
Do you have a duplex mismatch between the WAN interface and whatever it's connected to?
Bad cable? Is it exactly 100Mbps? Seems suspicious. :-\Steve
It is strange.
It worked before, same configuration, nothing has changed so why this is happening I don't know.
Have to check the machine later this evening. -
Run 'top -SH' at the console while testing your download speed.
Are you running out of CPU for some reason? You shouldn't be with that machine.
Do you have a duplex mismatch between the WAN interface and whatever it's connected to?
Bad cable? Is it exactly 100Mbps? Seems suspicious. :-\Steve
top -SH gave this:
$ top -SH
last pid: 63255; load averages: 0.10, 0.24, 0.13 up 0+00:03:33 19:09:05
95 processes: 3 running, 74 sleeping, 18 waitingMem: 48M Active, 12M Inact, 67M Wired, 1160K Cache, 21M Buf, 3797M Free
Swap: 8192M Total, 8192M FreePID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND
11 root 171 ki31 0K 32K RUN 1 2:59 100.00% {idle: cpu1}
11 root 171 ki31 0K 32K CPU0 0 2:58 100.00% {idle: cpu0}
0 root -68 0 0K 128K - 0 0:00 1.07% {em0 taskq}
0 root -68 0 0K 128K - 1 0:00 0.49% {em1 taskq}
0 root -16 0 0K 128K sched 1 0:46 0.00% {swapper}
12 root -32 - 0K 288K WAIT 1 0:01 0.00% {swi4: clock}
270 root 45 0 3204K 592K select 1 0:00 0.00% devd
38664 root 76 0 104M 27384K accept 1 0:00 0.00% php
38817 root 45 0 102M 21716K piperd 1 0:00 0.00% php
38719 root 64 20 5836K 1464K select 1 0:00 0.00% apinger
3 root -8 - 0K 16K - 1 0:00 0.00% g_up
4 root -8 - 0K 16K - 0 0:00 0.00% g_down
34493 root 44 0 23720K 3916K kqread 0 0:00 0.00% lighttpd
14 root -16 - 0K 16K - 0 0:00 0.00% yarrow
35731 root 76 0 100M 12232K wait 1 0:00 0.00% php
34828 root 76 0 100M 12232K wait 1 0:00 0.00% php
12 root -64 - 0K 288K WAIT 0 0:00 0.00% {irq14: ata0}
60936 root 76 20 8292K 1720K wait 1 0:00 0.00% shMaxed out on 98Mbit/s
-
Aww..
The NIC port 2 only gives 100Mbit. :(
Why this now, the speed is 1000Mbit, says both the PC and the modem. -
Both ends set to auto detect speed and duplex?
Your ISP decided to limit you? ;)So all you did was reinstall, with the same version?
Steve
-
Both ends set to auto detect speed and duplex?
Your ISP decided to limit you? ;)So all you did was reinstall, with the same version?
Steve
Yes.
Tried the card in my desktop.Port 1: 1000Mbit connection, 200Mbit measured
Port 2: 1000Mbit connection, 100Mbit measuredSo the card is smoked, how it can indicate 1Gbit and deliver 100Mbit I don't know, probably firmware problems or a faulty circuit.
Checked the physical port, but no problems visible.Warranty here we come!
-
Huh, that is not something I would have thought of.
Weird. ::)Steve