Build fails - ERROR Building libtool

podilarius

The new changes to the file allow for a build, but it is not clean.
Here is a sample:


==> Compiling pfPorts...
>>> Executing buildports.RELENG_2_0
>>> Setting MAKEJ_PORTS (-j) to ''
>>> Found port location /usr/ports/net/pfflowd-0.8...overlaying pfPorts /usr/home/pfsense/tools/builder_scripts/../../tools/pfPorts/pfflowd-0.8 to /usr/ports/net/pfflowd-0.8 and building...Done.
>>> Building pfflowd-0.8(pfflowd-0.8)...cat: /tmp/pfPort_alreadybuilt: No such file or directory
>>> Found port location /usr/ports/security/ipsec-tools-devel...overlaying pfPorts /usr/home/pfsense/tools/builder_scripts/../../tools/pfPorts/ipsec-tools-devel to /usr/ports/security/ipsec-tools-devel and building...Done.
>>> Found port location /usr/ports/devel/libtool...Done.
>>> Building libtool()...already built on this run.  Skipping...
>>> Found port location /usr/ports/net/openldap24-client...Done.
>>> Building openldap24-client()...already built on this run.  Skipping...
>>> Building openldap24-client()...already built on this run.  Skipping...
>>> Found port location /usr/ports/sysutils/grub...overlaying pfPorts /usr/home/pfsense/tools/builder_scripts/../../tools/pfPorts/grub to /usr/ports/sysutils/grub and building...Done.
>>> Found port location /usr/ports/devel/autoconf...Done.
>>> Building autoconf()...make: don't know how to make clean. Stop
ERROR!
>>> Building athstats...main.c: In function 'getfmt':
main.c:73: warning: implicit declaration of function 'strcasecmp'
Done!
>>> Building tools/crytpo...Done!
==> End of pfPorts...

It should stop at this point since there is an errors present, but alas it continues. It also does not re-complile like the 2.1 builds do.

ccesario

Hello,

I'm having the same problem

Freebsd 8.1 in VMware ESXi 5

ardunio

And, me too. Building libtool step never progresses.

jamesc

Good to know that i'm not the only one!
I've set up 2 more fresh builder VM's and followed the wiki precisely but always get the same problem :(

podilarius

Hello Guys,
I have tried out the new buildports.RELENG_2_0 (4/5/11 16:30EST) and it is still skipping building ports even when it should.There are also several ports like libxml2 that keeps trying to rebuild but always says skipping.

ardunio

Hi.
After you clone the tools repo, in the tools folder, type:

git checkout RELENG_2_0

It switches the branch from master to RELENG_2_0.

podilarius

so does:
./set_version.sh RELENG_2_0 cvsup17.freebsd.org

wagonza

Try update your ports (with ./update_git_repos.sh) - there were some changes made yesterday which should fix the problems you were seeing.

ardunio

@wagonza:

Try update your ports (with ./update_git_repos.sh) - there were some changes made yesterday which should fix the problems you were seeing.

I've just tried and it stopped at "Executing buildports.RELENG_2_0"
I've updated ports, source code and pfsense-tools but still not working.

wagonza

It should eventually continue after that, how long did you leave it for?

ardunio

@wagonza:

It should eventually continue after that, how long did you leave it for?

Over 1 hour.

wagonza

@ardunio:

Over 1 hour.

heh, ok no it should not be that long. Try do a clean_build.sh, apply_kernel_patches.sh and re-run the build_pfPorts.sh

podilarius

I have tried a couple of times and I had errors on build, but since I have built once, the errors doesn't seems stop a successful build of the iso. I am also still skipping build where when building 2.1, I don't skip. On re-building the iso and updates on 2.1, all the ports are rebuilt and forced into registering (effectively doing a port upgrade). 2.0 apparently sees that it is already installed and does not re-compile. The problem is that with the customizations and patches to the system, it makes any normal FreeBSD port upgrade method useless.
I am currently build 2.1 images in the virtual server and will paste the 2.0.1 build errors in here at a later time.

ardunio

@wagonza:

heh, ok no it should not be that long. Try do a clean_build.sh, apply_kernel_patches.sh and re-run the build_pfPorts.sh

I did but had lot of errors again.

podilarius

Well … the same errors are now present in the 2.1 builds. Yet it still builds ISOs and updates.


>>> Overlaying pfPorts /home/pfsense/tools/builder_scripts/../../tools/pfPorts/unbound to /usr/ports/dns/unbound and building...
>>> gmake(gmake-3.82)...already built on this run.  Skipping.
>>> libevent(libevent-1.4.14b_2)...already built on this run.  Skipping.
>>> gmake(gmake-3.82)...already built on this run.  Skipping.
>>> libtool(libtool-2.4.2)...already built on this run.  Skipping.
>>> Building ldns(ldns-1.6.12)...Done.
>>> expat2(expat-2.0.1_2)...already built on this run.  Skipping.
>>> Building unbound(unbound-1.4.16)...Done.
>>> Ports with failures:        3
>>> Building libart_lgpl(libart_lgpl-2.3.21,1)...ERROR!
>>> Building freetype2(freetype2-2.4.2)...ERROR!
>>> Building olsrd(olsrd-0.5.6.r7)...ERROR!
>>> Building athstats...main.c: In function 'getfmt':
main.c:73: warning: implicit declaration of function 'strcasecmp'
Done!

ardunio

@podilarius:

Well … the same errors are now present in the 2.1 builds. Yet it still builds ISOs and updates.


>>> Overlaying pfPorts /home/pfsense/tools/builder_scripts/../../tools/pfPorts/unbound to /usr/ports/dns/unbound and building...
>>> gmake(gmake-3.82)...already built on this run.  Skipping.
>>> libevent(libevent-1.4.14b_2)...already built on this run.  Skipping.
>>> gmake(gmake-3.82)...already built on this run.  Skipping.
>>> libtool(libtool-2.4.2)...already built on this run.  Skipping.
>>> Building ldns(ldns-1.6.12)...Done.
>>> expat2(expat-2.0.1_2)...already built on this run.  Skipping.
>>> Building unbound(unbound-1.4.16)...Done.
>>> Ports with failures:        3
>>> Building libart_lgpl(libart_lgpl-2.3.21,1)...ERROR!
>>> Building freetype2(freetype2-2.4.2)...ERROR!
>>> Building olsrd(olsrd-0.5.6.r7)...ERROR!
>>> Building athstats...main.c: In function 'getfmt':
main.c:73: warning: implicit declaration of function 'strcasecmp'
Done!

I'm having same errors.

wagonza


>>> Building libart_lgpl(libart_lgpl-2.3.21,1)...ERROR!
>>> Building freetype2(freetype2-2.4.2)...ERROR!
>>> Building olsrd(olsrd-0.5.6.r7)...ERROR!
>>> Building athstats...main.c: In function 'getfmt':
main.c:73: warning: implicit declaration of function 'strcasecmp'
Done!

I thought i had checked in a fix for this ^^, these actually would fail now on any build if you have updated your ports. There was a change to pkg-config which causes the first two ports to fail. olsrd is moving to a package, so that should be removed. I will try finish that package in the next few days and have it removed from the build setup. I will get this fixed and report back.

ardunio

Okay. Thanks for your caring.

podilarius

Thanks wagonza. I try to keep my build servers up-to-date. This is why I would like for the build scripts to rebuild ports. Right now, it looks like if the port is already installed, it skips building it. I would like to keep it so that if /tmp/pgPorts_forced_build_required is still there to have it rebuild all the ports in the list with at least the BATCH and FORCE_PKG_REGISTER options set so that the ports and the installed files are updated. Let me know if that is just not realistic.

wagonza

No problem. Do a ./update_git_repos.sh and rebuild it should be working now.
Ill look at the /tmp/pfPorts_forced_build_required bit and see - it still needs a lot of tuning.