Sarg package for pfsense
-
Can you check if /var/log/dansguardian folder exists?
-
Can you check if /var/log/dansguardian folder exists?
Hello Marcelloc, I already check dansguardian. It is still exists. see some screenshot
-
Can you check if /var/log/dansguardian folder exists?
Hello Marcelloc, I already check dansguardian. It is still exists. see some screenshot
Ok anyway I will try again.
-
-
Ok anyway I will try again.
Run sarg cmd on console and check if it returns errors.
I just clean install pfsense again. Installed dansguardian and squid3. I checked at system log file I saw many error there.
Apr 17 20:02:46 php: /pkg_mgr_install.php: The command '/usr/local/etc/rc.d/dansguardian stop' returned exit code '126', the output was '/usr/local/etc/rc.d/dansguardian: Permission denied'
Apr 17 20:02:46 php: : New alert found:
Apr 17 20:02:46 check_reload_status: Reloading filter
Apr 17 20:07:39 check_reload_status: Syncing firewall
Apr 17 20:07:39 php: /pkg_mgr_install.php: Beginning package installation for squid3.
Apr 17 20:07:40 check_reload_status: Syncing firewall
Apr 17 20:08:46 check_reload_status: Syncing firewall
Apr 17 20:08:46 php: /pkg_mgr_install.php: Creating squid cache subdirs in /var/squid/cacheApr 17 20:08:46
php: /pkg_mgr_install.php: The command '/usr/local/sbin/squid -k shutdown' returned exit code '1', the output was '2012/04/17 20:08:46| WARNING: (B) '::/0' is a subnetwork of (A) '::/0' 2012/04/17 20:08:46| WARNING: because of this '::/0' is ignored to keep splay tree searching predictable 2012/04/17 20:08:46| WARNING: You should probably remove '::/0' from the ACL named 'all' 2012/04/17 20:08:46| ERROR: Directive 'upgrade_http0.9' is obsolete. 2012/04/17 20:08:46| cache_cf.cc(381) parseOneConfigFile: squid.conf:2931 unrecognized: 'broken_vary_encoding''Apr 17 20:08:51
php: /pkg_mgr_install.php: The command '/usr/local/sbin/squid -k kill' returned exit code '1', the output was '2012/04/17 20:08:51| WARNING: (B) '::/0' is a subnetwork of (A) '::/0' 2012/04/17 20:08:51| WARNING: because of this '::/0' is ignored to keep splay tree searching predictable 2012/04/17 20:08:51| WARNING: You should probably remove '::/0' from the ACL named 'all' 2012/04/17 20:08:51| ERROR: Directive 'upgrade_http0.9' is obsolete. 2012/04/17 20:08:51| cache_cf.cc(381) parseOneConfigFile: squid.conf:2931 unrecognized: 'broken_vary_encoding''Apr 17 20:08:51
php: /pkg_mgr_install.php: The command '/usr/local/sbin/squid -z' returned exit code '1', the output was '2012/04/17 20:08:51| WARNING: (B) '::/0' is a subnetwork of (A) '::/0' 2012/04/17 20:08:51| WARNING: because of this '::/0' is ignored to keep splay tree searching predictable 2012/04/17 20:08:51| WARNING: You should probably remove '::/0' from the ACL named 'all' 2012/04/17 20:08:51| ERROR: Directive 'upgrade_http0.9' is obsolete. 2012/04/17 20:08:51| cache_cf.cc(381) parseOneConfigFile: squid.conf:2931 unrecognized: 'broken_vary_encoding''After I tried to reboot pfsense and squid has some files missing again.
Apr 17 20:33:28 php: : Not calling package sync code for dependency squidcache of squid3 because some include files are missing.
Apr 17 20:33:28 php: : Not calling package sync code for dependency squidnac of squid3 because some include files are missing.
Apr 17 20:33:28 php: : Not calling package sync code for dependency squidtraffic of squid3 because some include files are missing.
Apr 17 20:33:28 php: : Not calling package sync code for dependency squidupstream of squid3 because some include files are missing.
Apr 17 20:33:28 php: : Not calling package sync code for dependency squidreverse of squid3 because some include files are missing.
Apr 17 20:33:28 php: : Not calling package sync code for dependency squidauth of squid3 because some include files are missing.
Apr 17 20:33:28 php: : Not calling package sync code for dependency squidusers of squid3 because some include files are missing.I did not install SARG yet because I want to find out some bugs between Dandsguardian and Squid.
I will running SARG cmd on console after I have installed SARG.
-
config squid options, save
config dansguardian savecheck if errors persists.
-
another error found
Apr 17 21:13:53 php: : XML error: XML_ERR_NAME_REQUIRED at line 1 in /usr/local/pkg/dansguardian_users_footer.xml
Apr 17 21:13:53 php: : XML error: Invalid document end at line 99 in /usr/local/pkg/dansguardian_users_header.xml
Apr 17 21:13:53 php: : XML error: Invalid document end at line 100 in /usr/local/pkg/dansguardian_ips_header.xmlBoth of squid and dansguardian used proxy interface: LAN (no loopback interface selected)
If I use squid as "Transparent proxy" I got this error as below but if I don't use squid as "Transparent proxy" I don't get this error (as you said before try to use squid without "Transparent proxy").
Of course, I have installed NAT rules to redirect from squid port 3128 to DG port 8080.
Apr 17 21:52:39 php: : SQUID is installed but not started. Not installing "nat" rules.
Apr 17 21:52:39 php: : SQUID is installed but not started. Not installing "pfearly" rules.
Apr 17 21:52:39 php: : SQUID is installed but not started. Not installing "filter" rules.So it mean that using squid in transparent mode still have some bugs and problem.
config squid options, save
config dansguardian, saveNo error found in the system log.
-
Another problem:
"Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 62998077 bytes) in /usr/local/www/sarg_frame.php on line 52"
When tryed to load Sites and users.
-
Another problem:
"Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 62998077 bytes) in /usr/local/www/sarg_frame.php on line 52"
When tryed to load Sites and users.
It's a pfsense php memory limitation, you can work around this by accessing HTML reports directly http://pfsense_IP/sarg-reports/
-
Hmmm,
Maybe memory_limit change can solve this.Something like ini_set("memory_limit","256M");
Right Marcello!? :P
-
Hmmm,
Maybe memory_limit change can solve this.Something like ini_set("memory_limit","256M");
Right Marcello!? :P
The memory check prevents ini settings above it's limit(128 for 32 and 256 for 64 bits)
The page is asking 62998077bytes above current limit. This value can be changed on amd64 code but not on i386.
-
The memory check prevents ini settings above it's limit(128 for 32 and 256 for 64 bits)
The page is asking 62998077bytes. This value is higher then 512 hard limit for PHP on pfsense.
Opsss…. ignore my post :P
Thanks by info!
-
Another problem:
"Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 62998077 bytes) in /usr/local/www/sarg_frame.php on line 52"
When tryed to load Sites and users.
It's a pfsense php memory limitation, you can work around this by accessing HTML reports directly http://pfsense_IP/sarg-reports/
thanks
-
Hi Marcelloc
Could you sort all reports for Bytes Reverse??? -
Hi Marcelloc
Could you sort all reports for Bytes Reverse???You can sort sarg by clicking on column header.
-
I mean… by default! without any click!
Hi Marcelloc
Could you sort all reports for Bytes Reverse???You can sort sarg by clicking on column header.
-
Did you tried to select bytes on user option and sort fields in reverse options on general tab?
-
Did you tried to select bytes on user option and sort fields in reverse options on general tab?
Yes… I did it for the first try.
Can I edit the file sarg.conf on the console???now i've got this error on Redirector report page:
Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 49259754 bytes) in /usr/local/www/sarg_frame.php on line 52
I'm on AMD64
-
On amd64 it can be set to 256. I'll include it on next release.
For now, use http://pfsense.IP/sarg-reports
-
@marcelloc
First, thanks for this wonderfull Package!I have installed Squid and Sarg and both work fine. I make daily reports with the scheduler.
The Syntax for daily reports is "-ddate +%d/%m/%Y-date +%d/%m/%Y", but now
i need weekly, monthly and annual reports. What's the right Syntax to make this?Thanks, Hemingway
