Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Sarg package for pfsense

    pfSense Packages
    99
    467
    431.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • L
      lucapsg
      last edited by

      I'm trying to read the full name of the user via LDAP to show in Sarg reports, but I can not make it work.

      In Sarg->User I use the same configuration, functional, used for Squid and pfSense, with a specific user, verified with Diagnostic-> Authentication.

      Just about this, I found an oddity …
      In the 'LDAP search filter' I put the string '(sAMAccountName =% s)' but in /usr/local/etc/sarg/sarg.conf, is not registered  ::), but every other change, yes.
      So, the next page load I was expecting a blank or default value, whereas it appeared the correct string  ???
      Where is it recorded? And, above all, irrespective of the position, this is used in the LDAP query?

      The LDAP directory is Active Directory on Windows 2003 and in the Event Viewer I have not seen any attempt to access by Sarg. Perhaps because of what I just said?

      The software I use are all the latest (I think):

      • PfSense 2.0.1-RELEASE (i386) built on Wed Dec 12 18:24:17 EST 2011
      • Squid 2.7.9 pkg v.4.3.1
      • SquidGuard 1.4_2 pkg v.1.9.1
      • Sarg 2.3.2 pkg v.0.4.1

      Any suggestions?
      Thanks for the nice job, Marcelloc!

      1 Reply Last reply Reply Quote 0
      • marcellocM
        marcelloc
        last edited by

        lucapsg,

        I've just pushed a fix to LDAP filter Search check.

        Reinstall the package in 15 minutes.

        Thanks for your feedback

        Treinamentos de Elite: http://sys-squad.com

        Help a community developer! ;D

        1 Reply Last reply Reply Quote 0
        • L
          lucapsg
          last edited by

          Wow, a rocket!
          Update installed, now the value entered in the 'LDAP search filter' is properly registered in sarg.conf. (I'm curious, where it was saved before?)
          After saving each tab and pressing 'Force update now' in the report still does not appear the full name of the user.
          From the Windows logs, there's no news, no attempt to access.
          I look forward to doing more tests.

          1 Reply Last reply Reply Quote 0
          • marcellocM
            marcelloc
            last edited by

            try to tcpdump connections from pfsense to active directory.

            maybe you have a ldap server fqdn configured that pfsense can't resolve.

            Treinamentos de Elite: http://sys-squad.com

            Help a community developer! ;D

            1 Reply Last reply Reply Quote 0
            • L
              lucapsg
              last edited by

              As I said, I'm using the same configuration used in System-> User Manager-> Servers and tests made ​​by Diagnostic-> Authentication confirm it is working.
              However, to remove any doubt, in the 'LDAP Hostname' I'm using the IP.
              Now I check with tcpdump … stay tuned...

              1 Reply Last reply Reply Quote 0
              • DonnyD
                Donny
                last edited by

                Hello Marcelloc,

                I just a little bit confuse between SARG ldap setting (User tab) and Squid authentication with LDAP. If I understand collect when I used Squid authentication with LDAP, I don't need to use SARG ldap settings right.
                Could you explain what is difference between SARG ldap setting and Squid authentication with LDAP, please?

                Thank u

                1 Reply Last reply Reply Quote 0
                • L
                  lucapsg
                  last edited by

                  During the update of the report and also in the tab 'Realtime', tcpdump has not caught anything on port 389.
                  To verify that the settings used in 'tcpdump' is correct I tried to capture traffic made ​​with Diagnostic-> Authentication and actually a bit of broth was captured.
                  pfSense is 192.168.152.1 while Windows 2003 is 192.168.152.200, both in a VMware test environment:

                  17:08:16.107802 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 0
                  17:08:16.109616 IP 192.168.152.200.389 > 192.168.152.1.61250: tcp 0
                  17:08:16.109692 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 0
                  17:08:16.109964 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 62
                  17:08:16.112227 IP 192.168.152.200.389 > 192.168.152.1.61250: tcp 22
                  ecc…

                  @Donny: In Squid LDAP is used to "authenticate", while in Sarg to replace the username with the full name of the user in reports.

                  1 Reply Last reply Reply Quote 0
                  • DonnyD
                    Donny
                    last edited by

                    @lucapsg:

                    During the update of the report and also in the tab 'Realtime', tcpdump has not caught anything on port 389.
                    To verify that the settings used in 'tcpdump' is correct I tried to capture traffic made ​​with Diagnostic-> Authentication and actually a bit of broth was captured.
                    pfSense is 192.168.152.1 while Windows 2003 is 192.168.152.200, both in a VMware test environment:

                    17:08:16.107802 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 0
                    17:08:16.109616 IP 192.168.152.200.389 > 192.168.152.1.61250: tcp 0
                    17:08:16.109692 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 0
                    17:08:16.109964 IP 192.168.152.1.61250 > 192.168.152.200.389: tcp 62
                    17:08:16.112227 IP 192.168.152.200.389 > 192.168.152.1.61250: tcp 22
                    ecc…

                    @Donny: In Squid LDAP is used to "authenticate", while in Sarg to replace the username with the full name of the user in reports.

                    Hello lucapsg,

                    It mean, I have to use both if I need full user name of the user in sarg reports. Is it correct?

                    Thank u

                    1 Reply Last reply Reply Quote 0
                    • H
                      Hugovsky
                      last edited by

                      HI all.  I have same problem with ldap. With system>user manager some traffic shows up in tcpdump and correctly connects. Nothing with users in sarg reports.

                      Edit: last package update was just now.

                      1 Reply Last reply Reply Quote 0
                      • L
                        lucapsg
                        last edited by

                        @Donny, well, if you have an LDAP directory and you want to authenticate users (Squid) And you also want to display the full name of the user in report (Sarg), then YES.
                        Or at least we're working on so that this is possible  ;)

                        Sarg can do also (and already does) replacement using its own internal function. See field 'Users Association' in Status->Sarg Reports->Users, but in my judgment is only recommended for a small number of users and/or if Squid authenticates users with their own list.

                        @ Marcelloc, any news?

                        1 Reply Last reply Reply Quote 0
                        • marcellocM
                          marcelloc
                          last edited by

                          @lucapsg:

                          Marcelloc, any news?

                          try to run sarg on console/ssh to see if it returns ldap erros or something.

                          Treinamentos de Elite: http://sys-squad.com

                          Help a community developer! ;D

                          1 Reply Last reply Reply Quote 0
                          • L
                            lucapsg
                            last edited by

                            I tried this …

                            
[2.0.1-RELEASE][admin@pfsense.virtualdomain.lan]/root(9): sarg
SARG: Records in file: 1093, reading: 100.00%
SARG: Successful report generated on /usr/local/www/sarg-reports/24Apr2012-24Apr2012
SARG: (removetmp) Cannot open file /usr/local/www/sarg-reports/24Apr2012-24Apr2012/sarg-general

                            …but...

                            
[2.0.1-RELEASE][admin@pfsense.virtualdomain.lan]/root(10): ls -l /usr/local/www/sarg-reports/24Apr2012-24Apr2012
ls: /usr/local/www/sarg-reports/24Apr2012-24Apr2012: No such file or directory

                            … is it useful?

                            1 Reply Last reply Reply Quote 0
                            • K
                              klamath
                              last edited by

                              @marcelloc:

                              I've just pushed a fix to Sort Fields in Reverse order check.

                              Reinstall the package in 15 minutes.

                              Thanks for the user_sort_field BYTES REVERSE!!!
                              This is Exactly what I was expected!

                              HP ProLiant MicroServer N40L - 2GB - 250G HD - 3 NIC Intel PRO/1000 MT Gigabit PCI
                              pfSense 2.0.1-RELEASE (amd64)

                              1 Reply Last reply Reply Quote 0
                              • DonnyD
                                Donny
                                last edited by

                                @lucapsg:

                                @Donny, well, if you have an LDAP directory and you want to authenticate users (Squid) And you also want to display the full name of the user in report (Sarg), then YES.
                                Or at least we're working on so that this is possible  ;)

                                Sarg can do also (and already does) replacement using its own internal function. See field 'Users Association' in Status->Sarg Reports->Users, but in my judgment is only recommended for a small number of users and/or if Squid authenticates users with their own list.

                                @ Marcelloc, any news?

                                Thank a lot,

                                OK, Do I need to create authentication servers for LDAP at option System-> User Manager >Servers, when I use both of Squid authenticate and SARG Ldap setting. Is it possible if you can show me how you configuration SARG Ldap setting option? Did you success to get full user name in sarg report?. for me I only got user name login in sarg report. It is not full name.

                                1 Reply Last reply Reply Quote 0
                                • L
                                  lucapsg
                                  last edited by

                                  For user authentication with Squid/LDAP see this post:
                                  http://forum.pfsense.org/index.php/topic, 47409.0.html

                                  As for replacing the username with the corresponding user's full name with Sarg/LDAP instructions are given in this tread, but there is still something that does not work, at least in my case  :-\

                                  1 Reply Last reply Reply Quote 0
                                  • DonnyD
                                    Donny
                                    last edited by

                                    @lucapsg:

                                    For user authentication with Squid/LDAP see this post:
                                    http://forum.pfsense.org/index.php/topic, 47409.0.html

                                    As for replacing the username with the corresponding user's full name with Sarg/LDAP instructions are given in this tread, but there is still something that does not work, at least in my case  :-\

                                    The links that you give it to me, I already done and tested before but I only get user login name. you can check the links below.
                                    http://forum.pfsense.org/index.php/topic,48347.msg257526.html#msg257526

                                    Thank u

                                    1 Reply Last reply Reply Quote 0
                                    • DonnyD
                                      Donny
                                      last edited by

                                      Hello Marcelloc,

                                      At Sarg "Users" tab, I try to config Ldap to get it work for full user name. At sarg ldap setting, I have configured the same CN, OU and DC as I have done with squid Ldap authenticate. so, I try many time to get full user name but it is not work. anyway try again tomorrow.

                                      Thank u

                                      1 Reply Last reply Reply Quote 0
                                      • I
                                        IGIdeus
                                        last edited by

                                        @klamath:

                                        @marcelloc:

                                        I've just pushed a fix to Sort Fields in Reverse order check.

                                        Reinstall the package in 15 minutes.

                                        Thanks for the user_sort_field BYTES REVERSE!!!
                                        This is Exactly what I was expected!

                                        Hi,

                                        I can also confirm. But first I had to uncheck and check option again to work.

                                        Best regards
                                        IGIdeus

                                        1 Reply Last reply Reply Quote 0
                                        • DonnyD
                                          Donny
                                          last edited by

                                          Have any news over SARG reports with full usernames instead of user name logins?

                                          Thank u

                                          1 Reply Last reply Reply Quote 0
                                          • marcellocM
                                            marcelloc
                                            last edited by

                                            @Donny:

                                            Have any news over SARG reports with full usernames instead of user name logins?

                                            No time to test yet.

                                            Did you tried to run sarg on console with ldap info? did it returned any error?

                                            Treinamentos de Elite: http://sys-squad.com

                                            Help a community developer! ;D

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post