Email server behind pfSense
-
Podilarius,
"Do you send email to the internal email server and then use the external as a forwarder, and then use the external as the public email mx and forward all inbound emails to the internal server?"
how can I do that?
-
Nahid,
That is going to depend on the type of email servers you are using. I use 2 email server types; Exchange and Zimbra. The setup for something like this is different in each, but it is possible. I asked to try to figure out what you are trying to accomplish. Are you in control of the 94.55 address where the external mail server is? -
We use MerakMail (IceWarp) mail server. My email Server is installed in a local machine with IP 10.10.1.5. The ISP provider has given us some static IP those we use for our servers. For example 94.55.59.129 is for our webserver but webserver is in our local ip with 10.10.1.11. I natted the 80 port with 94.55.59.129 and it is working with no problem. The same thing I want do is to send from and get mails from 10.10.1.5 but it should use 94.55.59.130 as permitted sender.
I have also natted the IMAP, POP3, and SMTP port forwarding. Could you please describe me the configuration that I need to send mail from 10.10.1.5 behind the pfSense but using the MX record of 94.55.59.130.
If you need further information please let me know.
-
Ah .. okay I see. Looking at the advanced outbound rule you posted, it seems wrong. As the others stated, you need to put this rule above all others in the AON screen. You also need to change the destination port to blank (any). Your server is going to be responding to request on high port with a source port of 25. As others have stated, you also need to change the interface to WAN.
I would open it up first and then lock it down so i would do:Interface: WAN
Source: INTERNALMAILSERVER
SPort: any
Destination: any
DPort: any
NAT Address: SESRICMailServer
NAT Port: blank (any)If that works, then just change SPort to 25 if you only want to NAT smtp.
-
You can get the configuration picture attached.
-
Will the above configuration work or is there anything wrong?
-
The configuration from the pics looks good. If it is not working, try restarting the FW.
-
Nahid,
You have two nats for the same port 80. It will not work.
The rest of your config is fine but you may need to test with bogons rules disabled on wan interface.
-
Nahid,
You have two nats for the same port 80. It will not work.
The rest of your config is fine but you may need to test with bogons rules disabled on wan interface.
They are to 2 different servers and 2 hopefully different internal ips (different aliases), so it should be okay.
-
They are to 2 different servers and 2 hopefully different internal ips (different aliases), so it should be okay.
That's right podilarius, if web server and mailserver are different wan ip's the nat is fine.
nahid,
Did you changed you pfsense gui port as well disabled webConfigurator redirect rule on system-> advanced?
-
marcelloc,
I have done that what you have said. And as podilarius said I have 2 different IP both internally and externally for the respective servers.
I am going to test now whether the above mentioned configuration is working or not. -
nahid-
I assume you have set up a VIP for each of your public IP address you intend to use…??
-
chpalmer,
What I have to do? I have to create Virtual IP for my Email Server or Aliases is ok?
Could you please explain.
-
marcelloc,
_"
nahid,Did you changed you pfsense gui port as well disabled webConfigurator redirect rule on system-> advanced?"_
I haven't changed it? Do I have to change it? or it ok?
-
I haven't changed it? Do I have to change it? or it ok?
yes, config these steps to avoid problems on port 80 nat.
-
I haven't changed it? Do I have to change it? or it ok?
yes, config these steps to avoid problems on port 80 nat.
Marcello- he needs a VIP for that external IP doesn't he??
-
Marcello- he needs a VIP for that external IP doesn't he??
The aliases on screen shots suggest that vip/ip alias are configured.
-
Marcello,
I am still not sure that what I have to use. Virtual IP or Aliases for my External Mail server forwarding or both of them are ok?
-
With one firewall, use IP alias. Firewall -> virtual ip-> IP alias
-
Marcello,
When I configure OutBound NAT InternalMailServer with the Virtual IP (IP Aliases) IntrnalMailServer (10.10.1.5) could not able to access Internet. Actually it should access through the Internet with its external ip I mean with the virtual ip that configured for it.
How can I solve this?
