Autoupdater and reboots
-
Description
seems that the autoupdater may not be rebooting and shutting down instead. Also, the web interface keeps showing that the router would be rebooted but never gets updated. I have to go physically reboot usually twice to get the system back up. (but web interface doesn't come up (see Bug #1502: web interface needs to be manually started)
2.0-RC1 (i386)
built on Wed May 4 15:04:09 EDT 2011History
#1
Updated by Jim P 6 minutes agoStatus changed from New to Closed
That is also not normal behavior, and not something that anyone else has seen that I'm aware of. Between your previous report and this one I'm guessing you have some other unrelated problem on your system. Please use the forum to diagnose issues, if a bug has been determined from that information, then it can be entered here.
hardware is Watchguard x1000 with VPN accelerator, 256mb RAM and 40gb HD
this has been happening since I moved to RC1
-
updating now and this is what I get:
Downloading updates…
pfSense is now upgrading.
The firewall will reboot once the operation is completed.
browser will sit on this window now
-
terminal session shows:
Broadcast Message from admin@pfsense.wa4zlw.homedns.org
(no tty) at 8:34 EDT…Firmware upgrade is complete. Rebooting in 10 seconds.
this URL
https://10.161.51.2/system_firmware_auto.php
still on previous screen
-
terminal session up
reload browser on previous URL
503 - Service Not Available
about a minute or so goes on and terminal session disconnects.
C:\Users\Leon>ping 10.161.51.2
Pinging 10.161.51.2 with 32 bytes of data:
Reply from 10.161.51.123: Destination host unreachable.
Reply from 10.161.51.123: Destination host unreachable.
Reply from 10.161.51.123: Destination host unreachable.
Reply from 10.161.51.123: Destination host unreachable.Ping statistics for 10.161.51.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),C:\Users\Leon>
about another minute or two then terminal session can reconnect
if i reload the same URL I now get this:
Diagnostics: Firmware: Auto Update
Packages are currently being reinstalled in the background.
Do not make changes in the GUI until this is complete.
I've seen this before and it seems not to ever go away
-
hours later and gui still shows:
System: Firmware: Settings
Packages are currently being reinstalled in the background.
Do not make changes in the GUI until this is complete.
(with the graphic)
-
I came back to this a few hours later and the browser was still showing the disk heads moving. I did a browser reload and it finally went away.
1. it seems u need to reload the page
2. it also seems to take a long time might be better to have a % indicator as well