Please help to configure Squid (Transparent) + Multiwan Load Balancing in PFS 2
-
Anybody , please ppost detailed configuration to implement squid (transparent) + multi wan load balancing on PFsense 2.0.1
-
Create a Gateway Group with your two WANS, change your Lan's outbound internet traffic from default gateway to your new gateway group. Setup squid in transparent mode add a custom options rule at the bottom with the following:- tcp_outgoing_address 127.0.0.1
Then goto outbound NAT and create a rule for each of your WANS as below
WAN 127.0.0.0/8 * * * * * NO WAN_1 Rule
WAN2 127.0.0.0/8 * * * * * NO WAN_2 RuleNow create a floating firewall rule as below
TCP WAN_MAIN address * * 80 (HTTP) Loadbalance1 none GW1andGW2