Status_queues.php page unable to load

Cino

Not sure, it's not something I have worked on, and it's on 2.1 so it's still considered 'ok' to break some stuff there as it isn't meant to be a stable branch.

fair enough.. its stable for the most part.. just some little things need touching up… at least what i use it for.

jimp

I think there is an open ticket that this was trying to fix, if you can find it, post on there that it isn't working as expected, and perhaps it will get better attention.

Cino

Only ticket I see is http://redmine.pfsense.org/issues/1893 but it talks about not all of their queues are showing..

if the issue is still there when the new binaries come out, i'll put a ticket in.

w0w

Confirmed.
I have absolutely the same behavior of pfsense
2.1-DEVELOPMENT (i386)
built on Wed Sep 21 20:25:30 PDT 2011
FreeBSD 8.1-RELEASE-p4

updated from 2.0 to 2.1 using this http://doc.pfsense.org/index.php/Updating_pfSense_code_between_snapshots

Cino

can this be moved to the 2.1 board please? its only related to 2.1 code that i know of.

EDIT: Thanks Jimp!

Cino

its working again :-) jQuery code needed to be updated: https://github.com/bsdperimeter/pfsense/blob/86cf36813dbf3ca89d6e8cd21df2625ddfb6d59f/usr/local/www/status_queues.php

btw, i deleted qstats from /usr/local/sbin before trying to the new page.

EDIT:
I do see this in the log with qstats removed:


	php: /status_queues.php: The command '/usr/local/sbin/qstats -p /var/run/qstats.pid' returned exit code '127', the output was '/usr/local/sbin/qstats: not found'

putting qstats back, page keeps loading… For the trade off, i can live with it for until we are freebsd9.x

Cino

my box must have a mind of its own… sometimes the page works, somtimes it doesn't.. anyone else experience the something?


Feb 4 13:31:40 	php: /status_queues.php: Something wrong happened during comunication with stat gathering

Cino

made some progress for my box anyways.. I'm still using 2.0.1 binaries but with 2.1 code(haven't gitsync in a while because now i need the 2.1 dev binaries or my box will break)

some reason my box wont execute /usr/local/sbin/qstats -p /var/run/qstats.pid via status_queues.php. It just hangs. If I run the command via the cmdline, the page displays queue data again. I setup shellcmd to run /usr/local/sbin/qstats -p /var/run/qstats.pid on startup but the box would hang on startup… So i created a basic rc.d startup script and everything is good again.

One of these days I will just wipe my box and start from scratch but going to wait for 2.1 to be release since I have issues when the packages are being installed, I use a few that dont have pbi yet.

iamzam

Bump

On every 2.1 snapshot I have tried since they started being built again (AMD64, a few weeks ago) i have this problem. Also, if I go to the Status -> Queues page, my pfsense stops responding to any request until I reboot it. It still will pass traffic and everything works fine as far as I can tell, but will not answer any more web requests until I get into it via ssh and reboot it.

I don't have anything setup for traffic shaping or QOS so that page may actually work for someone who does. I discovered it by accident awhile ago and every snapshot I try it has happened since, I figured someone else would have said something about it lately but since no one else has, here I am.

jimp

This should make it better:

https://github.com/bsdperimeter/pfsense/commit/3a1e12cfd9049100c0c97603ce049d067ea78e1b

iamzam

Thanks for the quick draw mcgraw!

I confirm (via a gitsync and a reboot) that this fixes my problem, I now get a "Traffic shaping is not configured" page.

2.1-DEVELOPMENT (amd64)
built on Tue May 1 06:11:28 EDT 2012
FreeBSD pfs.dv.loc 8.3-RELEASE FreeBSD 8.3-RELEASE #1: Tue May 1 07:20:03 EDT 2012 root@FreeBSD_8.3_pfSense_2.1.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64