PfBlocker

johnodon

The easiest way to workaround this is to create a custom list with action allow outbound(or both) and put companies ips there.

This way, these ips will be allowed before any coutry rule.

Unless I am missing it, there is not an option to "Permit Both". Should I create two lists: "Permit Inbound" and "Permit Outbound"?

Thx,

John

kilthro

You could make a list with alias only and then just add the firewall rule on both wan and lan to permit it. That way you only have one list but reference it in both locations for both ways.

johnodon

@kilthro:

You could make a list with alias only and then just add the firewall rule on both wan and lan to permit it. That way you only have one list but reference it in both locations for both ways.

Good idea! :)

Thanks!

marcelloc

To use this way, you may need to change pfblocker action to alias only and then create your rules.

By default, pfblocker stays on top of rules.

Gradius

This only happens if I reboot/shutdown my pfSense, when I perform boot it's there (this is why is important to perform at last a reboot to check if everything comes up fine again).

[filter_load] There were errors(s) loading the rules: /tmp/rules.debug:20

cannot define table pfBlockerAsia

cannot allocate memory/tmp/rules.debug:24

cannot define table pfBlockerNorthAmerica

cannot allocate memory/tmp/rules.debug.28

cannot define table pfBlockerTopSpammers

cat /tmp/rules.debug

#System aliases

loopback = "{ lo0 }"
WAN1 = "{ pppoe0 }"
LAN1 = "{ em0 }"
LAN2 = "{ em2 }"
VDSL2 = "{ em1 }"

#SSH Lockout Table
table <sshlockout> persist
table <webconfiguratorlockout> persist
#Snort tables
table <snort2c>

table <virusprot>

# User Aliases
table <pfblockerafrica> persist file "/var/db/aliastables/pfBlockerAfrica.txt"
pfBlockerAfrica = "<pfblockerafrica>"
table <pfblockerasia> persist file "/var/db/aliastables/pfBlockerAsia.txt"                  <<< line 20
pfBlockerAsia = "<pfblockerasia>"
table <pfblockereurope> persist file "/var/db/aliastables/pfBlockerEurope.txt"
pfBlockerEurope = "<pfblockereurope>"
table <pfblockernorthamerica> persist file "/var/db/aliastables/pfBlockerNorthAmerica.txt"  <<< line 24
pfBlockerNorthAmerica = "<pfblockernorthamerica>"
table <pfblockersouthamerica> persist file "/var/db/aliastables/pfBlockerSouthAmerica.txt"
pfBlockerSouthAmerica = "<pfblockersouthamerica>"
table <pfblockertopspammers> persist file "/var/db/aliastables/pfBlockerTopSpammers.txt"    <<< line 28
pfBlockerTopSpammers = "<pfblockertopspammers>"</pfblockertopspammers></pfblockertopspammers></pfblockersouthamerica></pfblockersouthamerica></pfblockernorthamerica></pfblockernorthamerica></pfblockereurope></pfblockereurope></pfblockerasia></pfblockerasia></pfblockerafrica></pfblockerafrica></virusprot></snort2c></webconfiguratorlockout></sshlockout>

Cannot allocate memorypfctl

syntax error in config file: pf rules not loaded The line in question reads [20]: table <pfblockerasia>persist file /var/db/aliastables/pfBlockerAsia.txt

I didn't changed any of those files, I'm only blocking that area from the files it came with pfBlocker.

Any solution?

/var/db/aliastables(15): ls -la
total 1384
drwxr-xr-x 2 root wheel 512 May 6 01:42 .
drwxr-xr-x 12 root wheel 1024 May 13 12:38 ..
-rw-r–r-- 1 root wheel 41499 May 13 14:12 pfBlockerAfrica.txt
-rw-r--r-- 1 root wheel 196104 May 13 14:12 pfBlockerAsia.txt
-rw-r--r-- 1 root wheel 71153 May 13 14:12 pfBlockerEurope.txt
-rw-r--r-- 1 root wheel 772252 May 13 14:12 pfBlockerNorthAmerica.txt
-rw-r--r-- 1 root wheel 36792 May 13 14:12 pfBlockerSouthAmerica.txt
-rw-r--r-- 1 root wheel 242707 May 13 14:12 pfBlockerTopSpammers.txt</pfblockerasia>

kilthro

Did you go to system > Advanced > Firewall/Nat tab and increase the Firewall Maximum Table Entries?

I have had to increase mine quite a bit to run all my tables. I currently have mine set to 999999999 and no longer get any memory allocation errors.

Gradius

@kilthro:

Did you go to system > Advanced > Firewall/Nat tab and increase the Firewall Maximum Table Entries?

I have had to increase mine quite a bit to run all my tables. I currently have mine set to 999999999 and no longer get any memory allocation errors.

Nope.

Will do. Hope is only this.

Thanks!

LinuxTracker

I've been really busy (figuring out Postfix).
I don't have time to update my previously posted spam lists.

(Note: http://forum.pfsense.org/index.php/topic,42543.msg258273.html#msg258273)

For now I have a routine that extracts all new Spam IPs into one list - updated 2x/hour.
http://dl.dropbox.com/u/71477228/freshspam1.txt

I'm also now harvesting spam IPs from a 2nd email server I manage.
http://dl.dropbox.com/u/71477228/freshspam2.txt

As I update these routines, the next rewrites will:

filter out any IPs of major WebMail providers (GMail, AOL, Yahoo, Hotmail, etc)

For now, I whitelist US Yahoo email servers and Hotmail/Live/Microsoft Hosting.
http://dl.dropbox.com/u/71477228/YahooIPsUS.txt
http://dl.dropbox.com/u/71477228/hotmail.comIPs.txt

Sort spam IPs into my existing US and non-US spam lists
Include relevant comment for each IP
Drop off addresses that haven't had a spam hit in x#of days.

Edit: Here's a list of AOL outbound Email Servers
http://dl.dropbox.com/u/71477228/AOL_MailIPs.txt

It's compiled from the information on this page.
http://postmaster.info.aol.com/info/servers.html

LinuxTracker

These spam lists have been effective w/o giving me false positives.

This is a list of fresh US Spam IPs from a major source, updated hourly.
http://dl.dropbox.com/u/71477228/usspamips.txt

This list contains fresh Spam IPs from US and other countries, updated hourly.
I'll eventually get it sorted into US/non-US.
http://dl.dropbox.com/u/71477228/worldspamips.txt

PM me if you want more detail about them.

LinuxTracker

Just an FYI.

I looked around a lot for a versatile, online IP converter.
The only one I ever found is by Bluetack and it never showed up in any of my Google search queries.

http://www.bluetack.co.uk/converter/

S_D

Hi there,

Sorry if I'm being a bit thick here and/or this question has already been asked, but can i use this package download blocklists, create Aliases against them, and then use standard pfsense firewall rules to block those ranges talking to/from just ONE port on a particular IP address (ie, allow it for all other ports)?

Thanks!

marcelloc

S_D,

Sure you can, just configure pfblocker and set action to alias only.

This way pfblocker download,create the lists and you can assgin these aliases to your own rules.

att,
Marcello Coutinho

S_D

Perfect! Thanks for the reply. I'll set it up tonight.

nesense

Hi :)

issue with system being stuck at "configuring firewall…" after reboot/startup with WAN interface down(or having wrong IP config)
using ctrl-c at console doesn't help.

i think the issue is pf tries to grab the lists but keeps waiting?

I tried uninstalling pfblocker and it worked fine with WAN down.
removed aliases + used deny inbound did not help

I'm using pfblocker 1.0.2 and pfs nanobsd 2.0.1

Thank u!

marcelloc

I've pushed an update to avoid downloads during boot process, reinstall the package and test again.

att,
Marcello Coutinho

nesense

@marcelloc:

I've pushed an update to avoid downloads during boot process, reinstall the package and test again.

att,
Marcello Coutinho

I tried reinstalling but package version is still 1.0.2 and I faced the same issue.

Thank u

marcelloc

Try to get some info on system logs.

nesense

php: : The command '/usr/bin/grep -v '^#' '/var/db/aliastables/pfBlockerspyware.txt.tmp' > '/var/db/aliastables/pfBlockerspyware.txt'' returned exit code '2', the output was ''
php: : The command '/usr/bin/fetch -T 5 -q -o '/var/db/aliastables/pfBlockerspyware.txt.tmp' 'https://127.0.0.1:443/pfblocker.php?pfb=pfBlockerspyware'' returned exit code '1', the output was 'fetch: transfer timed out'
php: : The command '/sbin/pfctl -nf /tmp/rules.test.packages' returned exit code '1', the output was 'no IP address found for grep: /tmp/rules.test.packages:17: file "/var/db/aliastables/pfBlockerTopSpammers.txt" contains bad data no IP address found for grep: /tmp/rules.test.packages:19: file "/var/db/aliastables/pfBlockerads.txt" contains bad data no IP address found for grep: /tmp/rules.test.packages:21: file "/var/db/aliastables/pfBlockerspyware.txt" contains bad data no IP address found for grep: /tmp/rules.test.packages:23: file "/var/db/aliastables/pfBlockerhijacked.txt" contains bad data no IP address found for grep: /tmp/rules.test.packages:25: file "/var/db/aliastables/pfBlockerdshield.txt" contains bad data'

marcelloc

Pfsense is trying to update urltables applied by pfblocker during boot.

I'll try to find a way to prevent this if there is no link/ip/webserver up.

TrickyWidget

I got the dreaded error trying to load the Level 1 list:

There were error(s) loading the rules: /tmp/rules.debug:16: cannot define table pfBlockerLevel1:
 Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded - The line in question reads
 [16]: table <pfblockerlevel1> persist file "/var/db/aliastables/pfBlockerLevel1.txt"</pfblockerlevel1>

My Firewall Maximum Table Entries is set to 4294967295 and still no love. Freshly installed pfSense and pfBlocker, most everything at defaults. Just the one block list. 512MB of RAM, only 32% in use. 1GHZ CPU.

Does anyone have any suggestions?

Thanks.