Mailscanner + spamassassin + clamav package

zlyzwy

Hi ,

I am receiving the error in maillog

May  2 21:40:50 pfsense MailScanner[44759]: MailScanner E-Mail Virus Scanner version 4.83.5 starting... 
May  2 21:40:50 pfsense MailScanner[44759]: Reading configuration file /usr/local/etc/MailScanner/MailScanner.conf 
May  2 21:40:50 pfsense MailScanner[44759]: Reading configuration file /usr/local/etc/MailScanner/conf.d/README 
May  2 21:40:50 pfsense MailScanner[44759]: Syntax error in line 143, value "" for allowiframetags is not one of allowed values "yes","disarm","no" 
May  2 21:40:50 pfsense MailScanner[44759]: Syntax error in line 144, value "" for allowformtags is not one of allowed values "yes","disarm","no" 
May  2 21:40:50 pfsense MailScanner[44759]: Syntax error in line 150, value "" for allowobjecttags is not one of allowed values "yes","disarm","no" 
May  2 21:40:50 pfsense MailScanner[44759]: Syntax error in line 145, value "" for allowscripttags is not one of allowed values "yes","disarm","no" 
May  2 21:40:50 pfsense MailScanner[44759]: Syntax error in line 146, value "" for allowwebbugtags is not one of allowed values "yes","disarm","no" 
May  2 21:40:50 pfsense MailScanner[44759]: Connected to Processing Attempts Database

Does anyone know what's the problem?

Another newbie question…
How can I change the default value in Mailscanner?
Double Click or change in .conf file?

Thanks in advance!

Zlyzwy

marcelloc

@zlyzwy:

Does anyone know what's the problem?

try to access each mailscanner config tab and save changes

@zlyzwy:

How can I change the default value in Mailscanner?
Double Click or change in .conf file?

Use ctrl+click to check/uncheck options on mailscanner conf

The default value on () means what is default on mailscanner. If you want a default setup, then ctrl+click all options that has a (yes) on description.

att,
Marcello Coutinho

marcelloc

This guide was posted yesterday at mailscanner site

01/05/2012 - The "MailScanner User Guide and Training Manual" is now available for free in PDF format!

hammeraus001

It appears that the libiconv-1.13.1_1.tbz file has vanished from the http://e-sac.siteseguro.ws/pfsense/8/All/ site for the i386 mailscanner-dev install.

The installer then attempts to locate it at the http://ftp2.FreeBSD.org/pub/FreeBSD/ports/i386/packages-8.1-release/All/ URL, which doesn't exist.

Thus the install is aborted. Any hints on how to resolve this?

marcelloc

I've pushed the missing file.

Try to reinstall it.

hammeraus001

No luck. Install halted at the same spot. Checked the http://e-sac.siteseguro.ws/pfsense/8/All/ URL and the file still isn't listed.

Below is the output from the instllation script:

_Beginning package installation for mailscanner-dev…
Downloading package configuration file... done.
Saving updated package information... done.
Downloading mailscanner-dev and its dependencies...
Checking for package installation...
Downloading http://e-sac.siteseguro.ws/pfsense/8/All/MailScanner-4.83.5.tbz ... (extracting)

Downloading http://e-sac.siteseguro.ws/pfsense/8/All/p5-NetAddr-IP-4.058.tbz ... (extracting)

Downloading http://e-sac.siteseguro.ws/pfsense/8/All/p5-Error-0.17016.tbz ... (extracting)

Downloading http://e-sac.siteseguro.ws/pfsense/8/All/p5-version-0.95.tbz ... (extracting)

Downloading http://e-sac.siteseguro.ws/pfsense/8/All/p5-Net-DNS-Resolver-Programmable-0.003.tbz ... (extracting)

Downloading http://e-sac.siteseguro.ws/pfsense/8/All/p5-Mail-SPF-2.007.tbz ... (extracting)

Downloading http://e-sac.siteseguro.ws/pfsense/8/All/libiconv-1.13.1_1.tbz ... could not download from there or http://ftp2.FreeBSD.org/pub/FreeBSD/ports/i386/packages-8.1-release/All/libiconv-1.13.1_1.tbz.
of MailScanner-4.83.5 failed!

Installation aborted.Backing up libraries...
Removing package...
Starting package deletion for MailScanner-4.83.5...done.
Skipping package deletion for perl-5.12.4_3 because it is a dependency.
Starting package deletion for pyzor-0.5.0_1...done.
Starting package deletion for p5-Mail-SPF-2.007...done.
Starting package deletion for p5-NetAddr-IP-4...done.
Starting package deletion for p5-Error-0...done.
Starting package deletion for p5-Net-DNS-Resolver-Programmable-0...done.
Starting package deletion for p5-version-0...done.
Starting package deletion for p5-IP-Country-2.27...done.
Removing mailscanner-dev components...
Tabs items... done.
Menu items... done.
Services... done.
Loading package instructions...
Include file mailscanner.inc could not be found for inclusion.
Deinstall commands...
Not executing custom deinstall hook because an include is missing.
Removing package instructions...done.
Auxiliary files... done.
Package XML... done.
Configuration... done.
Cleaning up... Failed to install package.

Installation halted._

marcelloc

Try again.

Since I finish the force perl version issue of this package, files will be available at official repo.

att,
Marcello Coutinho

hammeraus001

Package re-installed, but now has the following issue:

root: /usr/local/etc/rc.d/mailscanner: WARNING: failed to start mailscanner
May 14 12:18:53 php: : Config sync not being done because of missing sync IP (normal on secondary systems).
May 14 12:18:50 clamd[32059]: MaxThreads * MaxRecursion is too high: 25500, open file descriptor limit is: 11095
May 14 12:18:46 check_reload_status: Reloading filter
May 14 12:18:45 root: /usr/local/etc/rc.d/mailscanner: WARNING: failed to start mailscanner
May 14 12:18:43 php: /pkg_mgr_install.php: The command '/usr/local/etc/rc.d/mailscanner stop' returned exit code '1', the output was 'mailscanner not running? (check /var/run/MailScanner.pid).'
May 14 12:18:43 php: /pkg_mgr_install.php: Reload mailscanner
May 14 12:18:43 php: /pkg_mgr_install.php: The command '/usr/local/dcc/dcc_conf stop' returned exit code '126', the output was '/usr/local/dcc/dcc_conf: Permission denied'
May 14 12:18:43 root: /usr/local/etc/rc.d/clamav-clamd: WARNING: failed to start clamav_clamd
May 14 12:18:43 check_reload_status: Syncing firewall
May 14 12:18:42 root: /usr/local/etc/rc.d/mailscanner: WARNING: failed to start mailscanner
May 14 12:18:40 php: /pkg_mgr_install.php: The command '/usr/local/etc/rc.d/mailscanner stop' returned exit code '1', the output was 'mailscanner not running? (check /var/run/MailScanner.pid).'
May 14 12:18:40 php: /pkg_mgr_install.php: Reload mailscanner
May 14 12:18:40 php: /pkg_mgr_install.php: The command '/usr/local/dcc/dcc_conf stop' returned exit code '126', the output was '/usr/local/dcc/dcc_conf: Permission denied'
May 14 12:18:40 check_reload_status: Syncing firewall

Any ideas?

This was working perfectly (and had been for weeks and without any changes) until yesterday.

marcelloc

This package had no changes on last months but I'll check.

hammeraus001

Resolved the dcc_conf issue, with a chmod 744 on /usr/local/dcc/dcc_conf.

All I have now is the following:

May 14 12:48:45 php: : Config sync not being done because of missing sync IP (normal on secondary systems).
May 14 12:48:41 clamd[61980]: MaxThreads * MaxRecursion is too high: 25500, open file descriptor limit is: 11095
May 14 12:48:39 php: : Config sync not being done because of missing sync IP (normal on secondary systems).
May 14 12:48:37 root: /usr/local/etc/rc.d/mailscanner: WARNING: failed to start mailscanner
May 14 12:48:35 php: /pkg_edit.php: The command '/usr/local/etc/rc.d/mailscanner stop' returned exit code '1', the output was 'mailscanner not running? (check /var/run/MailScanner.pid).'
May 14 12:48:35 php: /pkg_edit.php: Reload mailscanner

Mailscanner exists:

ls -la /usr/local/sbin/mailscanner

-r-xr-xr-x 1 root wheel 67367 May 14 12:18 /usr/local/sbin/mailscanner

Mailscanner isn't running:

ls -la /var/run/MailScanner.pid

ls: /var/run/MailScanner.pid: No such file or directory

ps -aux | grep mailscanner

root 13419 0.0 0.1 3524 1264 0 S+ 12:53PM 0:00.00 grep mailscanner

hammeraus001

Testing a VM of a clean AMD install. Will advise how it goes.

hammeraus001

The clean install on the VM is working perfectly. I have redirected all SMTP traffic through the new VM for the time being and will rebuild the firewall on the weekend (love this "out of hours" stuff ;)).

Thanks for your help, fast responses and most of all the combination "mailscanner + spamassassin + clamav" package. Brilliant work!

marcelloc

I've pushed some updates to improve boot process, and checks to perl version and config files.

The clean install now, select all default options.

att,
Marcello Coutinho

expert_az

marcelloc ,in order use mailscanner package is checking on Postfix Forwarder>>>Antispam>>>Use Third part antispam box enough?any another settings?

marcelloc

I use it with Message Hold mode= manual using acls

and I put /^from:/ HOLD on header acls

ics

Hi,

I would like to disable the change on email subject when mailscanner "disarm" an email.
So I modified Mailscanner.conf and the line "Disarmed Modify Subject = no"
but it comes back to its previous settings "Disarmed Modify Subject = start" on reboot.

What can I do ?

Thanks