MultiWAN, after some time one of both get 0.0.0.0 (DHCP not working)
-
Hi, I have a problem.
I created a Gateway Group with WAN1 and WAN2 both with Trier 1. I defined in rule this group as gateway. So I'm using LoadBalancing.
Unfortunatelly after some time one of both is not working anymore because IP is 0.0.0.0 then. If I take a look into syslog I see DHCP is not working anymore which means WAN doesn't get valid IP from cable-modem (from Kabeldeutschland):
Jan 10 16:24:19 dhclient[51704]: DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 1 Jan 10 16:24:20 dhclient[51704]: DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 1 Jan 10 16:24:21 dhclient[51704]: DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 1 Jan 10 16:24:22 dhclient[51704]: DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 2 Jan 10 16:24:24 dhclient[51704]: DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 5 Jan 10 16:24:29 dhclient[51704]: DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 6 Jan 10 16:24:35 dhclient[51704]: DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 15 Jan 10 16:24:50 dhclient[51704]: DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 18 Jan 10 16:25:08 dhclient[51704]: DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 9 Jan 10 16:25:17 dhclient[51704]: DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 3 Jan 10 16:25:20 dhclient[51704]: No DHCPOFFERS received. Jan 10 16:25:20 dhclient[51704]: No working leases in persistent database - sleeping. Jan 10 16:25:20 dhclient: FAIL ```This happens repeately. It only works then after I rebooted pfsense. This is what status->interfaces looks like:Status up
DHCP up
MAC address XX:XX:XX:XX:XX:XX
IP address 0.0.0.0
Subnet mask 255.0.0.0
Media 1000baseT <full-duplex>In/out packets 514373/511534 (168.23 MB/68.95 MB)
In/out packets (pass) 511534/516848 (168.09 MB/68.95 MB)
In/out packets (block) 2839/0 (139 KB/0 bytes)
In/out errors 149101/2
Collisions 0</full-duplex>Before same happened but on other WAN. So… whats wrong here? Any Idea how to fix that? I'm using 2.0-Release. cu Floh -
u r not alone. :)
I got the same problem with unitymedia as ISP.
pf-Sense lost the connection anytime and get it not back automatically.
when i go to console and dhclient em1 then everything works fine again.
The suspect for me is UnityMedia… with a lot of other people ppp works very fine for example. -
Pfsense not support both WAN on DHCP. Try one of with ststic ip.