Installing on a Firebox X700

GOBIGRED

Ok thanks does pfsense had built in wireless? If so what firebox do i cant seem to find any info?

Thanks

stephenw10

pfSense supports any wifi card that is supported by FreeBSD 8.1 (2.0.1) or 8.3 (2.1). That is a lot of cards but it's not as good as wifi support in Linux. For example there is no support at all for 802.11N.

I'm running an Atheros 2413 based mini-PCI card as an access point in my X-Peak.

None of the Watchguard X86 based hardware had wifi built in.

Steve

GOBIGRED

I have a on WAN 3 LAN config how do allow the LAN's to talk to each other?

stephenw10

You have to add firewall rules (or modify the existing rules) to allow access between LANs.
For example the default rule on the LAN interface is Source: LAN net and Destination: any. This destination, any, includes all your other subnets on other interfaces so traffic can reach them. This default rule doesn't exist on any other interfaces so you have to add it.

Steve

GOBIGRED

so i need to make a rule saying destination any and source any? also what are some good steps to secure pfsense and my network?

stephenw10

pfSense is secure by default. ;)
In order to make it as secure as possible you should use rules that only open ports and interfaces you need. For example you should use, source: LANnet (or equivalent interface), in your rules to restrict what machines are allowed out.
You can restrict this further but only allowing ports you need, http, ssh, pop3 etc. Though it's easy to overlook something and end up blocking your own traffic.

Steve

GOBIGRED

just got a e series firebox upon receiving it doing research on pfsense and it said special tools required to get pfsense working is that correct?

stephenw10

Yes you need to do a workaround in the bios to make it boot a CF card larger than 512MB. In order to do that you can either make up cables to connect a monitor and keyboard or reflash the bios with one that allows console redirect.
See:
http://forum.pfsense.org/index.php/topic,20095.msg190456.html#msg190456

Which e series model do you have?

Steve

GOBIGRED

i got x750e 1250e and some peak models. I plan on listing the x750e since i got a lot for a great price.

stephenw10

Nice! :)
The peak-e models are actually less good for pfSense as the CPU is not correctly picked up by the speedstep driver and hence they run much hotter. The Core-e has a Celeron which doesn't have speedstep but can be replaced by a pentium-m for very little.

Steve

Nico621

Hello,

Does anyone know what 512 sticks of ram will work in these boxes, some people say they get it to work and others don't. I am currently looking at the ones on newegg and see they have three brands to choose from and they're all double sided dimms, any suggestions or specific models that are known to work?

Thanks,
Nico

stephenw10

You mean the X700 series?
They seem to be very fussy, so much so that I'm just sticking with 256MB. ::)
The best person to comment on this would be Brak since he has upgraded many of these boxes.

Steve

Sleeps

@Nico621:

Hello,

Does anyone know what 512 sticks of ram will work in these boxes, some people say they get it to work and others don't. I am currently looking at the ones on newegg and see they have three brands to choose from and they're all double sided dimms, any suggestions or specific models that are known to work?

Thanks,
Nico

Purchased this memory module "Kingston KVR133X64C3/512 512mb SDRAM 133 MHz 168pin" from ebay and it works fine in the X700

Sleeps

GOBIGRED

Trying to get another pfsense box up and running but cant get it to install say "Found compressed image file
Write error after 0 bytes (8192)." tried 3 diffrent files anyone know whats wrong?

stephenw10

Where are you seeing that error? When writing the image to the CF card? Using what?

Steve

GOBIGRED

Yes

GOBIGRED

tried physdiskwrite

stephenw10

It can't write to the card for some reason.
The card is read only? The CF adapter is faulty or not installed correctly? The card is faulty? Some other reason….
You could try using Win32diskimager instead: https://launchpad.net/win32-image-writer

Steve

GOBIGRED

Would you be able to help me nat (Newbie here trying to do a 1:1 NAT and having trouble. All I am trying to do is NAT a single host to one of my 10 public IPS and cant seem to get it to work. I am able to RDP from and diffrent lan but cant see it outside the lan or even get to the internet from that machine but can RDP into it. Any help would be great

Thanks

wallabybob

@GOBIGRED:

Would you be able to help me nat (Newbie here trying to do a 1:1 NAT and having trouble.

This doen't see to have anything to do with pfSense installation or Fireboxes so please start a new topic in a more appropriate forum (perhaps General)/

In the new post it would be helpful to add some configuration information and clarify a few points:
@GOBIGRED:

I am able to RDP from and diffrent lan but cant see it outside the lan

This seems contradictory: how can you RDP into it a different lan if it can't be seen outside tha lan? (Guess it depends on which LAN you are talking about. A diagram identifying the differents lans would be helpful.)

@GOBIGRED:

or even get to the internet from that machine but can RDP into it.

Is a firewall rule on the adjacent pfSense interface could be blocking internet access. Is there a relevant entry in the firewall log?