Temperature Widget

stephenw10

For 2.0.1 (FreeBSD 8.1 base).
Copy coretemp.ko (32bit or 64bit) into /boot/modules
Add```
coretemp_load="YES"


I thought these were already in 2.1?  :-\ Hence referencing them in the widget.

Steve

stephenw10

If motherboard manufacturers bothered to code their ACPI tables correctly there wouldn't be a problem! >:(

Steve

Edit: response to a post that vanished. ::)

Guest

…repost...
Hehe, im running on virtualized hardware, so i need to ask my bank to buy a new system which supports the processor specific module ;))
Anyway, both will be supported bythe widget

m4f1050

Steve, are you referring to the FireBox X500?

Recently my FB X500 fan/blower died and I had to open my X500, put a cpu fan in place of the blower and leave the cover off while I wait for new replacements I ordered off of eBay (from HK of course…) and was wondering if there was a way of enabling such widget for a Celeron 1200Mhz

stephenw10

Nope I was talking about the XTM5.
You can use the output of mbmon to drive the dashboard widget. We had a long thread up on this for 2.0.X, I'm sure a lot of it would be relevent here.
http://forum.pfsense.org/index.php/topic,39595.0.html

And here was my specific post:
http://forum.pfsense.org/index.php/topic,39595.msg204643.html#msg204643

Steve

Guest

ah, informative - ill read that in a minute.

decided to just post what i got till now:
The code defaults to dev.cpu0 [as is] but is able to handle multiple acpi temperatures too if that module is used instead.


function get_temp() {
//  queries thermal sensors via sysctl. 
// returns array of sensors and their corresponding values

        $arr_parsed ="";
        $arr_temp = array();

        $filter_acpi = "tz[0-1].temperature";

     // escaping for possible inclusion in config.xml

        $oid_cpu = escapeshellcmd("dev.cpu0.temperature");
        $oid_acpi = escapeshellcmd("hw.acpi.thermal");

     // First, query for a processor specific sensor on the die
         exec("/sbin/sysctl '". $oid_cpu ."' | grep -E 'cpu.*temperature'" , $arr_cpu);
        // exec ("cat /root/temp_cpu | grep -E 'cpu.0.temperature'" , $arr_cpu);

         if (arr_cpu != "") {
              $arr_temp = array_merge($arr_temp,$arr_cpu);
          }

     // Alternative: query all acpi thermal zones.

           exec ("sysctl ". $oid_temp ." | grep -E '". $filter_acpi ."'" , $arr_acpi);
          // exec ("cat /root/temp_acpi | grep -E '".$filter_acpi."'" , $arr_acpi);

          if (arr_acpi != "") {
              $arr_temp = array_merge($arr_temp,$arr_acpi);
             }

           foreach (($arr_temp) as $value) {
             preg_match("/tz[0-9]|cpu/i", $value, $sens_id); // get sensor id 
             preg_match("/[0-9]{1,2}.[0-9]/", $value, $sens_val);   // get temperature value
             $arr_parsed[] =  array ($sens_id, $sens_val);
           }

           return($arr_parsed);
        }

is nearly finished now but well see. Anyway, its main purpose is to train me some pfSense gui customisation skills, so no problem for me.
Heres what its look like by now:

pfsense_ajax.png_thumb

rcfa

So where do we get the coretemp.ko that's compatible with pfSense 2.1 short of building a BSD 8.3 kernel?
Is this going to end up in the regular distribution at some point or will this remain in the everyone interested hacks it in on their own territory?

Guest

Oh, its written Source independent (see discussion above) to let the users choose what they want to use.
Edit:
Im currently banned from the highspeed World and have to use gprs till eoM. (:grm:)
ill sync wt current git and do the commit as soon as my highpriced provider is able to…

till then here are the other changed functions:


function updateTemp(obj_json) {
/*  modify the red / grey bar gifs according to the temperature
    ratio is one pixel per degree.
*/

        jQuery.map(obj_json,function(value,index){
        tempmeter = "#tempmeter" + value
        tempwidtha = "#tempwidtha" + value
        tempwidthb = "#tempwidthb" + value
        console.log(tempmeter);

        jQuery(tempwidthb).css('width',(100 - value[1]) + 'px');

        if(jQuery(tempmeter))
                jQuery(tempmeter).html(value[1] + '\u00B0' + 'C');
        if(jQuery(tempwidtha))
                jQuery(tempwidtha).css('width',value[1] + 'px');
        if(jQuery(tempwidthb))
        jQuery(tempwidthb).css('width',(100 - value[1]) + 'px');

});

and in system_information.widget.php


                        Temperature 

                                ![left bar](./themes/<?= $g['theme']; ?>/images/misc/bar_left.gif)![red bar](./themes/<?= $g['theme']; ?>/images/misc/bar_blue.gif)![gray bar](./themes/<?= $g['theme']; ?>/images/misc/bar_gray.gif)![right bar](./themes/<?= $g['theme']; ?>/images/misc/bar_right.gif)

stephenw10

I don't have 2.1 running on anything right now so I can't check but is it not included in the image? If not it just needs copying from a FreeBSD 8.3 install.

Steve

daplumber

Any chance of an option for Deg F ? Large numbers of people just never grokked the metric system sadly. :-\

Guest

Hi, when the code gets accepted in main, then it will be in the image.
sorry, for the first run it will stay with degree ;(

But this patch is just the first of two. A further one, which i plan to be more dynamic and more configurable in the gui will follow.
By now we have migration phase, where the view is generated by a mix of php and js output)
In that second patch i plan to seperate them and use php only for the backend and js for the ~~complete system_information.widget~~
Edit - no lets keep it easy, just for the temps :)

But for now - Ill note down a todo for an Option to switch output between Fahrenheit / Degrees ;)

If you need it faster, you can add code to check for the timezone after the patch has been accepted.

hanD !

rcfa

Is there any chance to convert this into a package that also installs the coretemp.ko and loads it, because without this won't work on my system, and it being a fanless design, I'd love to know if things go badly in terms of temperature for some reason…

m4f1050

@stephenw10:

Nope I was talking about the XTM5.
You can use the output of mbmon to drive the dashboard widget. We had a long thread up on this for 2.0.X, I'm sure a lot of it would be relevent here.
http://forum.pfsense.org/index.php/topic,39595.0.html

And here was my specific post:
http://forum.pfsense.org/index.php/topic,39595.msg204643.html#msg204643

Steve

Thanks! :) I "pkg_add -r mbmon" and at least I can run it in command line. So I have 3 different "temps" when I run mbmon…

Temp.= 47.0, 127.0, 79,0; Rot.= 0, 0, 0
Vcore = 1.49, 3.38; Volt. = 3.31, 4.95, 11.67, -3.06, -6.12

If -T3 is the CPU and that's in celcius I think I'm frying my CPU ATM!! But it's been running forever like this...?

EDIT 1:
Ok, T1 is my CPU temp, it went down to 46.0 when I put another fan to help the one I have temporarily. BTW I modified my functions.inc.php and I now have Temp in my GUI :D Thanks again Steve!

EDIT 2:
I changed the -I to -i to show integer (no .0 at the end)

rcfa

mbmon doesn't seem to work here
So I guess I'd need coretemp. Where can we get the required files for that (amd64/BSD 8.3)?

markuhde

@m4f1050:

If -T3 is the CPU and that's in celcius I think I'm frying my CPU ATM!! But it's been running forever like this…?

Even if it was 79, that's fine for most modern CPU's. My MacBook Pro runs about 50-60 in normal use and keeps the fan running about 2000 RPM, but doesn't start ramping up the fan speed until just under 80. Under load, it throttles the fan speed up and down to keep the CPU in the 80-90 range.

Guest

Depends on if its fahrenheit or celsius too, hehe.

I see that mbmon is getting much attention and currently we support coretemp and acpi.
The code generates a source indepent temperature array, so its possible to add mbmon to.
I will add it as a source. Its not much effort and then everyone is able to to query with his favorite toy in the BE ;)

–-

Maybe ill decide do a package too in the future, when i build up enough knowledge to do so, but lets keep the balls down for the moment :)
After all atm its just a neat patch which adds some sensors.

Steven posted a link to the coretemp modules here: http://files.pfsense.org/jimp/ko-8.1/amd64/coretemp.ko

markuhde

@ThorstenK:

Depends on if its fahrenheit or celsius too, hehe.

AFAIK, every single CPU on the market reads temperature in Celsius.

Guest

Yes, so im pretty sure that it wont be a good idea to modify the temp widgets code to print them in Fahrenheit or use that as a default. (see discussion above)
daplumpler: other People may get confused in the beginnings. I dont think we want this happening in such a critical area.

stephenw10

Here is the coretemp module from my FreeBSD install.
It's an i386 (32bit) module from FreeBSD 8.3 rel. As before:

@stephenw10:

Copy coretemp.ko into /boot/modules
Add```
coretemp_load="YES"

I don't have a 64bit install at the moment unfortunately.

Remove the .png extension.

Steve

coretemp.ko.png

m4f1050

@ThorstenK:

Depends on if its fahrenheit or celsius too, hehe.

I see that mbmon is getting much attention and currently we support coretemp and acpi.
The code generates a source indepent temperature array, so its possible to add mbmon to.
I will add it as a source. Its not much effort and then everyone is able to to query with his favorite toy in the BE ;)

–-

Maybe ill decide do a package too in the future, when i build up enough knowledge to do so, but lets keep the balls down for the moment :)
After all atm its just a neat patch which adds some sensors.

Steven posted a link to the coretemp modules here: http://files.pfsense.org/jimp/ko-8.1/amd64/coretemp.ko

From what I understand, my T1 is my CPU temp and my T3 is my chipset temp. I am guessing if it's 127.0 (always at that) that temp is not available. You can program it to check if it's 127.0 to NOT display it in the GUI… If they are interested in knowing all the temps and not just the CPU temp..

BTW I confirmed with my buddy's FB X500 with good fan that he is running T1=45C , T2=127C and T3=77C (~2C less, so I am good)