Burst with limiter ?
-
Can create a burst with a limiter?
ipfw pipe show
00001: 200.000 Kbit/s 0 ms burst 0
00002: 512.000 Kbit/s 0 ms burst 0Thanks
Bdy
-
Not (yet?) in the GUI.
-
Thanks for the response
If not in the gui, if means can be done in filter.inc? or Should be how do I make it?
thanks
-
Someone else might be able to answer that, but I don't know or have the time to track it down right now.
-
on a forum,
http://freebsd.1045724.n5.nabble.com/Dummynet-and-bursting-td5669253.htmlwritten :
This is the literal Executed command:
/ sbin / ipfw pipe bw_up_pipeno} {$ config bw} {$ bw_up Kbit / s burst queue 500Kbytes 500 000
The output from ipfw pipe show:20 010: 1049 Mbit / s 0 500 000 ms burst
q151082 500 KB 0 flows (1 buckets) sched weight 85 546 0 0 pri 0 lmax droptail
FIFO sched 85 546 flags 0x0 type 0 1 active buckets
0 ip 0.0.0.0 / 0 0.0.0.0 / 0 45 2832 0 0 0But when tested in Pfsense is Not Running.