Pfsense 2.0.1 multiwan and failover problem
-
what went wrong with my setup?failover is not functioning :-[ wan1 use for browsing failover to wan2 and wan2 use for gaming and failover to wan1
[IMG]http://img803.imageshack.us/img803/3784/dualwan.jpg
By xtremeneo at 2012-06-05 -
what exactly is the problem ?
what rules don't match ? -
thanks figured it out :)
-
got problem ;D after installing lusca cache fail over is still functioning but theres no browsing i cant view web pages but when i check the ip of existing connectiong failover work
-
might be the same problem squid has … process binds to the default gateway | lan rules are not applied.
solution for failover: enable 'default gateway switching' if possible in your setup (System: Advanced: Miscellaneous)
solution for loadbalance & failover: use floating rules to match proxy http requests and send em out the correct gateway (search for squid + loadbalance)kind regards
-
might be the same problem squid has … process binds to the default gateway | lan rules are not applied.
solution for failover: enable 'default gateway switching' if possible in your setup (System: Advanced: Miscellaneous)
solution for loadbalance & failover: use floating rules to match proxy http requests and send em out the correct gateway (search for squid + loadbalance)kind regards
;) this is what i missed thank you sir