Squid 3.1.20 pkg 2.0.5_2: Shared object "libmd5.so.1" not found

m4st3rc1p0

can you tell me how do you fix this libmd5.s0.1 is missing

TIA :o

I was able to get squid working by linking the /lib/libmd.so.5 version to /usr/lib/libmd5.so.1.

A bit of a hack, but it works… ;D

D

jimp

That should be coming from libwww, and that package is there on the server. Not sure why it wouldn't be getting pulled in, I'll have to run a couple tests.

Is this happening on i386? amd64? both?

Gerard

amd64 running over here!
Thanks in advance ;)

jimp

I specified libwww as a dependency so it would be forcefully installed rather than coming in automatically, it may work now, give it a try.

Gerard

Ok thanks, I will report back tomorrow! (not on site today).

marcelloc

Are this squid tbz builds done on 8.3 or 8.1 ? ???

I had no issues or missing libs compiling it on my 8.1 freebsd.

jimp

8.1

No idea why that happens sometimes, the binaries are all there but it's as if the package code just isn't including the reference to other package file as expected.

Razor_FX_II

2.0.1-RELEASE (amd64)
built on Mon Dec 12 18:16:13 EST 2011
FreeBSD 8.1-RELEASE-p6

Uninstalled and reinstalled squid 3.1.20 pkg 2.0.5_2

System Logs:
Jun 20 13:50:10 php: /pkg_edit.php: [squid] xmlrpc sync is starting.
Jun 20 13:50:10 php: /pkg_edit.php: Starting Squid
Jun 20 13:50:10 php: /pkg_edit.php: The command '/usr/local/sbin/squid -f /usr/local/etc/squid/squid.conf' returned exit code '1', the output was '/libexec/ld-elf.so.1: Shared object "libmd5.so.1" not found, required by "squid"'
Jun 20 13:50:20 check_reload_status: Reloading filter
Jun 20 13:50:26 php: : SQUID is installed but not started. Not installing "nat" rules.
Jun 20 13:50:26 php: : SQUID is installed but not started. Not installing "pfearly" rules.
Jun 20 13:50:26 php: : SQUID is installed but not started. Not installing "filter" rules.

jimp

Razor,

If you look at "pkg_info" from the shell, do you have libwww installed?

If so you might pkg_delete libwww* and then remove/reinstall squid.

bgbearcatfan

It's working for me now on i386, thanks!

nutt318

I was getting the same issue, so I removed Squid and Snort, made sure no libwww was listed. Then I installed Squid3, now im getting this error. Any Ideas?

Console Log Error when starting squid:
[2.0.1-RELEASE][root@pfsense.ps]/usr/local/etc/rc.d(45): ./squid.sh start
2012/06/20 16:17:27| ERROR: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory
FATAL: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory
Squid Cache (Version 3.1.20): Terminated abnormally.
CPU Usage: 0.016 seconds = 0.016 user + 0.000 sys
Maximum Resident Size: 5612 KB
Page faults with physical i/o: 0

System Log:


Jun 20 14:52:03	syslogd: kernel boot file is /boot/kernel/kernel
Jun 20 16:05:02	check_reload_status: Syncing firewall
Jun 20 16:05:09	check_reload_status: Syncing firewall
Jun 20 16:05:18	check_reload_status: Syncing firewall
Jun 20 16:05:20	check_reload_status: Reloading filter
Jun 20 16:05:26	php: : SQUID is installed but not started. Not installing "nat" rules.
Jun 20 16:05:26	php: : SQUID is installed but not started. Not installing "pfearly" rules.
Jun 20 16:05:26	php: : SQUID is installed but not started. Not installing "filter" rules.
Jun 20 16:10:52	check_reload_status: Syncing firewall
Jun 20 16:11:07	check_reload_status: Syncing firewall
Jun 20 16:11:08	check_reload_status: Syncing firewall
Jun 20 16:11:08	check_reload_status: Reloading filter
Jun 20 16:11:10	kernel: pid 31429 (rrdtool), uid 0: exited on signal 11
Jun 20 16:11:10	check_reload_status: Reloading filter
Jun 20 16:14:16	check_reload_status: Syncing firewall
Jun 20 16:14:17	php: /pkg_mgr_install.php: Beginning package installation for squid3.
Jun 20 16:14:17	check_reload_status: Syncing firewall
Jun 20 16:15:43	check_reload_status: Syncing firewall
Jun 20 16:15:45	php: /pkg_mgr_install.php: Stopping any running proxy monitors
Jun 20 16:15:46	php: /pkg_mgr_install.php: Starting Squid
Jun 20 16:15:46	php: /pkg_mgr_install.php: Starting a proxy monitor script
Jun 20 16:15:46	check_reload_status: Reloading filter
Jun 20 16:15:46	squid: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory
Jun 20 16:15:48	check_reload_status: Syncing firewall
Jun 20 16:15:48	php: /pkg_mgr_install.php: Starting Squid
Jun 20 16:15:48	squid: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory
Jun 20 16:15:48	php: /pkg_mgr_install.php: The command '/usr/local/sbin/squid -f /usr/local/etc/squid/squid.conf' returned exit code '1', the output was '2012/06/20 16:15:48| ERROR: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory FATAL: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory Squid Cache (Version 3.1.20): Terminated abnormally. CPU Usage: 0.018 seconds = 0.015 user + 0.004 sys Maximum Resident Size: 5612 KB Page faults with physical i/o: 0'
Jun 20 16:15:51	Squid_Alarm[20157]: Squid has exited. Reconfiguring filter.
Jun 20 16:15:51	Squid_Alarm[20358]: Attempting restart...
Jun 20 16:15:51	squid: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory
Jun 20 16:15:51	php: : SQUID is installed but not started. Not installing "nat" rules.
Jun 20 16:15:52	php: : SQUID is installed but not started. Not installing "pfearly" rules.
Jun 20 16:15:52	php: : SQUID is installed but not started. Not installing "filter" rules.
Jun 20 16:15:58	check_reload_status: Reloading filter
Jun 20 16:15:58	check_reload_status: Syncing firewall
Jun 20 16:15:59	check_reload_status: Reloading filter
Jun 20 16:15:59	check_reload_status: Syncing firewall
Jun 20 16:16:04	php: : SQUID is installed but not started. Not installing "nat" rules.
Jun 20 16:16:04	php: : SQUID is installed but not started. Not installing "pfearly" rules.
Jun 20 16:16:05	php: : SQUID is installed but not started. Not installing "filter" rules.
Jun 20 16:16:11	php: : SQUID is installed but not started. Not installing "nat" rules.
Jun 20 16:16:11	php: : SQUID is installed but not started. Not installing "pfearly" rules.
Jun 20 16:16:12	php: : SQUID is installed but not started. Not installing "filter" rules.
Jun 20 16:16:32	squid: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory

marcelloc

I'll check squid.inc folders and find a way to get it working on both versions (2.1 and 2.0)

Razor_FX_II

@jimp:

Razor,

If you look at "pkg_info" from the shell, do you have libwww installed?

If so you might pkg_delete libwww* and then remove/reinstall squid.

Your funny…I send people like you home every day from my IT Dept to tell there wives that he can't pay the mortgage anymore.

jimp

Well if you're running a beta-quality package, then be prepared to troubleshoot.

If someone fired me for something so trite, I wouldn't want to work there anyhow.

If you don't cooperate with people trying to get basic troubleshooting info from you, then you won't find much help here.

phil.davis

Just want to verify - on 2.0.1 did squid3 default to putting the conf file in /usr/local/etc/squid/squid.conf ?
If so, then the explicit specification of the conf file location "-f /usr/local/etc/squid/squid.conf" should be fine.
If not, then that might now be pointing at a place that does not exist on 2.0.1.
(I don't have any 2.0.1 systems left to easily try it)

nutt318

Getting error when starting squid. I removed squid and also made sure that the libwww was gone as well. So I installed squid3 again and now getting the below issue. Any Ideas?

Error on console:
[2.0.1-RELEASE][root@pfsense.ps]/usr/local/etc/rc.d(47): ./squid.sh start
2012/06/21 09:02:59| ERROR: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory
FATAL: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory
Squid Cache (Version 3.1.20): Terminated abnormally.
CPU Usage: 0.016 seconds = 0.008 user + 0.008 sys
Maximum Resident Size: 5720 KB
Page faults with physical i/o: 0

Version:
2.0.1-RELEASE (i386)
built on Mon Dec 12 18:24:17 EST 2011
FreeBSD 8.1-RELEASE-p6

You are on the latest version.

marcelloc

@Razor_FX_II:

Your funny…I send people like you home every day from my IT Dept to tell there wives that he can't pay the mortgage anymore.

You fire people that tries to help you? ???

Maybe you are one of the worst IT managers in history. :o

nutt318

Fixed my issue by creating a English folder the the path it was looking for :)

bgbearcatfan

@marcelloc:

@Razor_FX_II:

Your funny…I send people like you home every day from my IT Dept to tell there wives that he can't pay the mortgage anymore.

You fire people that tries to help you? ???

Maybe you are one of the worst IT managers in history. :o

Agreed…. What nonsense...

Gerard

@nutt318:

Getting error when starting squid. I removed squid and also made sure that the libwww was gone as well. So I installed squid3 again and now getting the below issue. Any Ideas?

Error on console:
[2.0.1-RELEASE][root@pfsense.ps]/usr/local/etc/rc.d(47): ./squid.sh start
2012/06/21 09:02:59| ERROR: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory
FATAL: Error Directory /usr/local/etc/squid/errors/English: (2) No such file or directory
Squid Cache (Version 3.1.20): Terminated abnormally.
CPU Usage: 0.016 seconds = 0.008 user + 0.008 sys
Maximum Resident Size: 5720 KB
Page faults with physical i/o: 0

Version:
2.0.1-RELEASE (i386)
built on Mon Dec 12 18:24:17 EST 2011
FreeBSD 8.1-RELEASE-p6

You are on the latest version.

Changed my language settings to Dutch, worked fine :)
We have two PFsense machines, 1 is running smoothly now on 3.1.20 (production) after the linking workaround.

I'm going to upgrade from 3.1.19 to 3.1.20 on the second machine tomorrow!