LightSquid Segmentation fault access.log

[marcelloc]

If your squid can log usernames, then reports will show username.

what you get on access.log squid file?

[raphtelecom]

Thank you for your response as fast.

In my configuration file sarg.conf I put access log that goes into the / var / squid / log /
where I find my file and access.log, cache.log and clog.core.

I type the command to clog access.log to see if that has in it but its telling me "Segmentation fault (core dumped)".

I've never been able to open this file even with several re-installation.
I have over 1 gig of RAM.

[marcelloc]

@raphtelecom:

I've never been able to open this file even with several re-installation.

with access.log you need to tail it instead of loading it to memory.

do on console/ssh

tail -f /var/squid/logs/access.log

[raphtelecom]

I log on and log off as user and it does absolutely nothing happens in my access.log file … I tested with the command tail-f access.log. I will review my configuration sarg.conf ?!

EDIT : I was asleep, I have two access log. The first / usr / local / etc / sarg / access.log which is not helpful and did I tell you that it was written there. The second / usr / local / squid / var / logs / access.log / access.log works and I wrote my ip address in the report. I must exchange it for the username.

I changed : And I have in reports my computer names instead of IP address (DNS name) when I put my option resolve_ip yes / no option and not to user_ip yes / no to no, I only have IP addresses

TAG:  resolve_ip yes/no

Convert ip address to dns name

sarg -n

resolve_ip yes

TAG:  user_ip yes/no

Use Ip Address instead userid in reports.

sarg -p

user_ip no

[raphtelecom]

Do you have an idea to help me for my userid in sarg report, it would be appreciated

[marcelloc]

@raphtelecom:

Do you have an idea to help me for my userid in sarg report, it would be appreciated

check how users are logged on squid access.log file and select username or domain/username on sarg user tab.

save changes and check realtime log for users instead of ip addresses.

[raphtelecom]

I have ip address in my access.log


[marcelloc]

Sarg and lightsquid will show only info that are on squid logs.

Look for squid auth configs tutorials to have username logged on access files first.

[raphtelecom]

Is that my problem may be that I have checked the transparent proxy

[marcelloc]

@raphtelecom:

Is that my problem may be that I have checked the transparent proxy

transparent proxy does not authenticate users.

[raphtelecom]

This is probably the cause of my problems, how to redigirer then my requests for port 80 on my proxy.

thank

[marcelloc]

Use WPAD/PAC proxy scripts, you can configure it on dhcp and/or dns

[raphtelecom]

Does he have an easier way to get an authentication UserID in my reports ?

Thanks