Mailscanner + spamassassin + clamav package

ics

Will be there when you update/upgrade the package. :)

And about updates, is there a procedure to update packages ?
Or I just need to click on "Reinstall this package" in the package manager ?

package.png_thumb

marcelloc

Normally, just update.

A backup first is always a good idea. :)

expert_az

Hello Marcello

i just installed postfix and mailscanner on my pre production pf box,and getting this error on my system log

My pf version:
2.0.1-RELEASE (amd64)
built on Mon Dec 12 18:16:13 EST 2011
FreeBSD 8.1-RELEASE-p6

Jun 7 16:32:39 MailScanner[15521]: Syntax error in line 145, value "" for allowscripttags is not one of allowed values "yes","disarm","no"
Jun 7 16:32:39 MailScanner[15521]: Reading configuration file /usr/local/etc/MailScanner/conf.d/README
Jun 7 16:32:39 MailScanner[15521]: Reading configuration file /usr/local/etc/MailScanner/MailScanner.conf
Jun 7 16:32:39 MailScanner[15521]: MailScanner E-Mail Virus Scanner version 4.83.5 starting…
Jun 7 16:32:39 mailscanner: Process did not exit cleanly, returned 1 with signal 0
Jun 7 16:32:39 MailScanner[3723]: ClamAV Module ERROR:: Could not load databases from /var/db/clamav
Jun 7 16:32:39 MailScanner[3723]: I have found clamavmodule scanners installed, and will use them all by default.
Jun 7 16:32:34 MailScanner[8485]: Enabling SpamAssassin auto-whitelist functionality…
Jun 7 16:32:34 MailScanner[8485]: Connected to SpamAssassin cache database
Jun 7 16:32:34 MailScanner[8485]: Using SpamAssassin results cache

ics

Your antivirus is up to date ?
freshclam –version

clamav is not automatically updated, you have configure your crontab.
To update manually :
/usr/local/bin/freshclam

expert_az

/usr/local/bin/freshclam
ERROR: Can't open /var/log/clamav/freshclam.log in append mode (check permissions!).
ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log).

freshclam –version
ClamAV 0.97.3

Chuckit

/usr/local/bin/sa-update -> this one too ;)

expert_az

sa-update
/usr/local/lib/perl5/site_perl/5.12.4 /usr/local/lib/perl5/5.12.3/BSDPAN /usr/local/lib/perl5/site_perl/5.12.3/mach /usr/local/lib/perl5/site_perl/5.12.3 /usr/local/lib/perl5/5.12.3/mach /usr/local/lib/perl5/5.12.3) at /usr/local/bin/sa-update line 80.
BEGIN failed–compilation aborted at /usr/local/bin/sa-update line 80.

marcelloc

@expert_az:

sa-update
/usr/local/lib/perl5/site_perl/5.12.4 /usr/local/lib/perl5/5.12.3/BSDPAN /usr/local/lib/perl5/site_perl/5.12.3/mach /usr/local/lib/perl5/site_perl/5.12.3 /usr/local/lib/perl5/5.12.3/mach /usr/local/lib/perl5/5.12.3) at /usr/local/bin/sa-update line 80.
BEGIN failed–compilation aborted at /usr/local/bin/sa-update line 80.

Are you using the latest mailscanner package version?

expert_az

mailscanner-dev Services Package Info 4.83.5 pkg v.0.2.1

mschiek01

Clamd::ERROR:: UNKNOWN CLAMD RETURN ./lstat() failed: Permission denied. ERROR :: /var/spool/MailScanner/incoming

Is anyone seeing this error in the /var/log/maillog. It's obviously a permissions error, but I can not figure out how to get rid of it.

the /var/spool/MailScanner/ is created by postfix. I tried adding clamav to the postfix group as well as www and wheel the error still occurs.

marcelloc

clamd should be running with postfix user.

Try to apply maiscanner config and check in /usr/local/etc/clamd.conf what user is configured.

att,
Marcello Coutinho

mschiek01

Multiple installs all installed

postfix->mailscanner->dansguardian

I check them all all have

Run as another user (clamd must be started by root for this option to work)

Default: don't drop privileges

User clamav

Tried save mailscanner configuration and enabling and disabling the daemon. It appears that the program is not updating the clamd.conf at all.

Did a new clean install -postfix-mailscanner-dansguardian. Saved the mailscanner config and checked the clamd.conf "clamav" was still the user.

Manually edited the clamd.conf and changed the user from "clamav" to "postfix" reboot and everthing is working properly.

marcelloc

@mschiek01:

Manually edited the clamd.conf and changed the user from "clamav" to "postfix" reboot and everthing is working properly.

I'll check again the code and include a force config file option. On my install it's working with user postfix without any manual edit.

att,
Marcello Coutinho

Unubtanium

I have a problem with Mailscanner, mailscanner installed today so it should be uptodate.
Working with postfix and mailscanner-dev: http://forum.pfsense.org/index.php/topic,40201.0.html

Mailscanner do exit every second or two. with this in the log:
mailscanner: Process did not exit cleanly, returned 1 with signal 0

I also get this in the log:
ClamAV Module ERROR:: Could not load databases from /var/db/clamav

So i tried to do as suggested here and tried to run this:
/usr/local/bin/freshclam

but then i got this error:
ERROR: Can not open /var/log/clamav/freshclam.log in append mode (check permissions!)
ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log)

When i check the folder /var/log/clamav it is emty!!
Same thing with /var/log/db emty!!

Running freshclam –version
Gives ClamAV 0.97.3

and did run this one(/usr/local/bin/sa-update ) too and that did run with no output.

So is mailscanner restarting every second because clamav has no db??

EDIT: Might have been a bit quick posting here.

Manually created the log file: /var/log/clamav/freshclam.log and changed permisions so any thing could log to it.
then tried to updated and then it complained it could not create tem folder in /var/db/clamav so i changed the permisions on that folder so it could update and create the temp folder.

And now i am stuck on this error when trying to update clamav:

WARNING: Clamd was NOT Notified: Can't connect to clamd through /var/run/clamav/clamd.sock
connect(): No such file or directory ???

The folder var/run/clamav/ is emty? Should it be?
And now mailscanner is veining me this in the log
mailscanner: Process did not exit cleanly, returned 0 with signal 9
And i get alot of this: kernel: swap_pager_getswapspace(4): failed until i get this: kernel: pid 8874 (perl5.12.4), uid 125, was killed: out of swap space
And then it continues with: swap_pager_getswapspace(5): failed

Sorry for noob questions. ::)

marcelloc

Did you configured the mailscanner on gui? Checked and save options on all tabs?

Unubtanium

jupp i did.
I did go through all of the to make sure they saved and did write the config files to stop this error:
MailScanner[15521]: Syntax error in line 145, value "" for allowscripttags is not one of allowed values "yes","disarm","no"

that did not fix it so i had to change allowscripttags from disarm to no..

looks like the swap_pager_getswapspace problem is gone after a reboot.. strange???

Looks like thing are working as they should now, and did not do anything else then describe in previous post except reboot.

But anyway would still like to know more about this error:
WARNING: Clamd was NOT Notified: Can't connect to clamd through /var/run/clamav/clamd.sock
connect(): No such file or directory

mschiek01

@Unubtanium:

I have a problem with Mailscanner, mailscanner installed today so it should be uptodate.
Working with postfix and mailscanner-dev: http://forum.pfsense.org/index.php/topic,40201.0.html

Mailscanner do exit every second or two. with this in the log:
mailscanner: Process did not exit cleanly, returned 1 with signal 0

I also get this in the log:
ClamAV Module ERROR:: Could not load databases from /var/db/clamav

So i tried to do as suggested here and tried to run this:
/usr/local/bin/freshclam

but then i got this error:
ERROR: Can not open /var/log/clamav/freshclam.log in append mode (check permissions!)
ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log)

When i check the folder /var/log/clamav it is emty!!
Same thing with /var/log/db emty!!

Running freshclam –version
Gives ClamAV 0.97.3

and did run this one(/usr/local/bin/sa-update ) too and that did run with no output.

So is mailscanner restarting every second because clamav has no db??

EDIT: Might have been a bit quick posting here.

Manually created the log file: /var/log/clamav/freshclam.log and changed permisions so any thing could log to it.
then tried to updated and then it complained it could not create tem folder in /var/db/clamav so i changed the permisions on that folder so it could update and create the temp folder.

And now i am stuck on this error when trying to update clamav:

WARNING: Clamd was NOT Notified: Can't connect to clamd through /var/run/clamav/clamd.sock
connect(): No such file or directory ???

The folder var/run/clamav/ is emty? Should it be?
And now mailscanner is veining me this in the log
mailscanner: Process did not exit cleanly, returned 0 with signal 9
And i get alot of this: kernel: swap_pager_getswapspace(4): failed until i get this: kernel: pid 8874 (perl5.12.4), uid 125, was killed: out of swap space
And then it continues with: swap_pager_getswapspace(5): failed

Sorry for noob questions. ::)

check this file /usr/local/etc/clamd.conf

scroll down to the following line and make sure that this is who clam is running under:

Run as another user (clamd must be started by root for this option to work)

Default: don't drop privileges

User postfix

If not change the user then you will need to reboot the box.

Unubtanium

Thanks for that mschiek01, the user was set to clamav so just changed it(Nice recap with the VI editor too :) ) and now it is rebooting.

So now more playing with subject word blacklisting. ;D

marcelloc

Just a question, did you checked VirusScanning(yes) and Virus scanner =clamd on mailscanner antivirus tab?

I've checked the code and it looks for user clamav on clamd.conf file


#check virus_scanner options
$libexec_dir="/usr/local/libexec/MailScanner/";
if ($virus_scanning == "yes"){
	if ($antivirus['virus_scanner'] =="none"){
		unlink_if_exists($libexec_dir.'clamav-autoupdate');
		unlink_if_exists($libexec_dir.'clamav-wrapper');
	}
else{
.
.
.
#clamd conf file
$cconf="/usr/local/etc/clamd.conf";
if (file_exists($conf)){
	$cconf_file=file_get_contents($cconf);
	if (preg_match('/User clamav/',$cconf_file)){
		$cconf_file=preg_replace("/User clamav/","User postfix",$cconf_file);
		file_put_contents($cconf, $cconf_file, LOCK_EX);
		}
	}

mschiek01

@marcelloc:

Just a question, did you checked VirusScanning(yes) and Virus scanner =clamd on mailscanner antivirus tab?

I've checked the code and it looks for user clamav on clamd.conf file


#check virus_scanner options
$libexec_dir="/usr/local/libexec/MailScanner/";
if ($virus_scanning == "yes"){
	if ($antivirus['virus_scanner'] =="none"){
		unlink_if_exists($libexec_dir.'clamav-autoupdate');
		unlink_if_exists($libexec_dir.'clamav-wrapper');
	}
else{
.
.
.
#clamd conf file
$cconf="/usr/local/etc/clamd.conf";
if (file_exists($conf)){
	$cconf_file=file_get_contents($cconf);
	if (preg_match('/User clamav/',$cconf_file)){
		$cconf_file=preg_replace("/User clamav/","User postfix",$cconf_file);
		file_put_contents($cconf, $cconf_file, LOCK_EX);
		}
	}

All my boxes had virus scanner = auto. Maybe that is why I always have to configure it manually?

Maybe you should default it in your package to clamd instead of auto?