How do I delete the cache of Squid
-
i install this version
2.0.2-RC1 (i386)
built on Mon May 21 00:20:12 EDT 2012
FreeBSD 8.1-RELEASE-p9
on an old computer with 80gb hdd
i can access to the pfsense only from webgui
from another computeron the computer i install pfsense i have only dos window with 14 options
the Disk usage show 34%
how can i see this files
and how can i delete this filesi try to restart squid and it didnt work
-
There should be an option on the squid cache to clear it, but I don't see it (I'm using the squid3 package).
SSH into your pfsense and
cd /var/squid/cache
,rm -rf *
. lol -
i am also using squid3
didnt find clear cache optionhow do i use ssh ?
-
i am also using squid3
didnt find clear cache optionhow do i use ssh ?
it's easy. go to "system -> advanced -> admin access" and make sure to tick the "enable secure shell" box. then click save. next, download a program called winscp, its free. once you've installed winscp, run it and click on "session" on the tree. put in your "hostname" which will be your pfsense box ip, the default port number of 22 is what pfsense is set to unless you changed it somehow. put your "root" username and password in and hit login. you should get a prompt regarding a key or something, just accept it. you can then browse your pfsense box's file system on the right pane. the left pane is your computers file system.
-
i am using linux ubuntu
Is there a parallel software to winscp for linux
-
scp on command line at least if not any other
-
i am using linux ubuntu
Is there a parallel software to winscp for linux
Open up a terminal and
ssh admin@yourpfssensebox
-
i use this command
and i got to this- Logout (SSH only) 8) Shell
- Assign Interfaces 9) pfTop
- Set interface(s) IP address 10) Filter Logs
- Reset webConfigurator password 11) Restart webConfigurator
- Reset to factory defaults 12) pfSense Developer Shell
- Reboot system 13) Upgrade from console
- Halt system 14) Disable Secure Shell (sshd)
- Ping host
this is the same screen i have in the old computer i install pfsense
how i can see squid cache from here ? -
at least press 8 to go shell. But i don't know any further
-
at least press 8 to go shell. But i don't know any further
`cd /var/squid/cache`, `rm -rf *`??
-
i get an error says
there to many Parameters`cd /var/squid/cache`, `rm -rf *`??
-
I've read this that you have to use several phases
firstcd /var/squid/cache
and then
rm -rf *
-
It did not do anything
the mark go only one line down -
You have to stop squid, then from a shell the command
squid -z
should suffice (it recreates the swap area, and therefore should clean also the cache).