Help with DHCPv6-PD
-
Hey there!
At last, IPv6 is available from my ISP. They have informed me to use DHCPv6 and Prefix Delegation and a /60 network. (No SLAAC)
My WAN-interface is configured with DHCPv6 and prefix delegation size set to 60.
WAN-interface receives a public IPv6 address with /128 prefix. (2a02:fe0:cf00…...)
I have also enabled DHCPv6 and PD with size set to 60 on my LAN interface, but i get no IPv6-addresses on the inside or the pfSense-interface.Any tips? Never fiddled around with prefix delegation before.
Running 2.1-BETA0, July 5.
Thanks!
-
you set the wan to dhcp-pd prefix size 60
You set the lan to track interface wan. That should be enough.
-
I tried to enable track interface on a couple of my LAN-interfaces.
What happens, is that both interfaces get the same link local address, fe80::1:1 (loopback ip?)
Even when i disable IPv6 on both these interfaces, fe80::1:1 is still the active link local address.I have two physical interfaces, one for WAN and one where all my LAN interfaces are VLAN-tagged. All LAN and OPT-interfaces are renamed.
The log also outputs this when i track the WAN-interface:
Jul 7 12:38:57 php: /interfaces.php: Accept router advertisements on interface re0_vlan112
Jul 7 12:38:57 check_reload_status: Reloading filter
Jul 7 12:39:00 dhcp6c[4326]: dhcp6_ctl_authinit: failed to decode base64 string
Jul 7 12:39:00 dhcp6c[4326]: dhcp6_ctl_authinit: failed to decode base64 string
Jul 7 12:39:00 dhcp6c[4326]: client6_init: failed initialize control message authentication
Jul 7 12:39:00 dhcp6c[4326]: client6_init: failed initialize control message authentication
Jul 7 12:39:00 dhcp6c[4326]: client6_init: skip opening control port
Jul 7 12:39:00 dhcp6c[4326]: client6_init: skip opening control port