Firebox LCD Driver for LCDProc
-
Since it's now a very long thread and the code is somewhat spread out here are the source files for the sdeclcd driver.
Producing a driver file from these is not simply a matter of invoking gcc! I hope I have noted all the steps I took to do it here.
Steve
-
Thanks to fmertz the driver now correctly supports the front panel buttons on the X-E boxes. ;D
Attached to this post is v1.05 sdeclcd driver with reworked keyboard code.
the sdeclcd.so file should be 13522 Bytes.
There is no advantage to X-Core or X-Peak box users so you can continue using the old version in the tarball. Of course if you want to test that this new version doesn't break your box that would be great. ;)
I have tested it on the X-E and X-Peak boxes.Please report any problems.
Steve
-
Thanks to fmertz the driver now correctly supports the front panel buttons on the X-E boxes. ;D
In the spirit of facilitating getting folks involved in contributing to this driver, I decided it was time to put all this code in one place. The long term plan would certainly be to merge this driver with the upstream lcdproc project. For now, I gathered everyone's contributions and put them in public version controlled project on github.
The setup is as follows: The master branch contains the code from upstream lcdproc. It is the 0.5dev version, the current development area. I created the sdec branch to capture all the changes necessary for the Watchguard Firebox LCD driver. There are various commits on that branch, one for each contribution, attributed by author as best as I could. The branch captures changes to the sources, makefiles and documentation. The idea is that someone wanting to build this driver from source would be a few commands away from doing so by using this repo.
The github repository for the sdeclcd is at https://github.com/fmertz/sdeclcd
To build this driver from source:
to be updated... git clone ... cd ... ./autogen.sh --enable-drivers=sdeclcd makeFeedback welcome.
-
I'm not sure you can do that in one step, I certainly didn't.
./autogen.sh ./configure --enable-drivers=sdeclcd makeThe requirements for getting the code into lcdproc upstream seemed tough to meet to me.
Steve
-
I'm not sure you can do that in one step
Commands:
git clone -b sdec git://github.com/fmertz/sdeclcd.git cd sdeclcd/ ./autogen.sh ./configure --enable-drivers=sdeclcd makeIn FreeBSD:
[fcm@BSDDev /usr/home/fcm]$ uname -a FreeBSD BSDDev.localdomain 8.2-RELEASE FreeBSD 8.2-RELEASE #0: Fri Feb 18 02:24:46 UTC 2011 root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 [fcm@BSDDev /usr/home/fcm]$ git clone -b sdec git://github.com/fmertz/sdeclcd.git Cloning into sdeclcd... remote: Counting objects: 628, done. remote: Compressing objects: 100% (499/499), done. remote: Total 628 (delta 90), reused 627 (delta 89) Receiving objects: 100% (628/628), 992.04 KiB | 191 KiB/s, done. Resolving deltas: 100% (90/90), done. [fcm@BSDDev /usr/home/fcm]$ cd sdeclcd/ [fcm@BSDDev /usr/home/fcm/sdeclcd]$ ./autogen.sh Running aclocal ... Running autoheader... Running automake ... configure.in:75: installing `./compile' configure.in:10: installing `./config.guess' configure.in:10: installing `./config.sub' configure.in:6: installing `./install-sh' configure.in:6: installing `./missing' clients/lcdexec/Makefile.am: installing `./depcomp' Running autoconf ... [fcm@BSDDev /usr/home/fcm/sdeclcd]$ ./configure --enable-drivers=sdeclcd checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... nawk checking whether make sets $(MAKE)... yes checking build system type... i386-unknown-freebsd8.2 checking host system type... i386-unknown-freebsd8.2 checking whether to enable debugging... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for ranlib... ranlib checking whether gcc and cc understand -c and -o together... yes checking for xmlto... no checking CFLAGS for gcc -Wno-unused-function... -Wno-unused-function checking CFLAGS for gcc -ftrampolines... no, unknown checking for gethostbyname... yes checking for connect... yes checking for inet_aton... yes checking for kstat_open in -lkstat... no checking for nanosleep in -lposix4... no checking for getloadavg... yes checking for swapctl... no checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking procfs.h usability... no checking procfs.h presence... no checking for procfs.h... no checking sys/procfs.h usability... yes checking sys/procfs.h presence... yes checking for sys/procfs.h... yes checking sys/loadavg.h usability... no checking sys/loadavg.h presence... no checking for sys/loadavg.h... no checking utmpx.h usability... no checking utmpx.h presence... no checking for utmpx.h... no checking for kvm_open in -lkvm... yes checking sched.h usability... yes checking sched.h presence... yes checking for sched.h... yes checking for sys/types.h... (cached) yes checking machine/pio.h usability... no checking machine/pio.h presence... no checking for machine/pio.h... no checking machine/sysarch.h usability... yes checking machine/sysarch.h presence... yes checking for machine/sysarch.h... yes checking sys/cpuvar.h usability... no checking sys/cpuvar.h presence... no checking for sys/cpuvar.h... no checking machine/apm_bios.h usability... yes checking machine/apm_bios.h presence... yes checking for machine/apm_bios.h... yes checking for System V IPC headers... yes checking for union semun... yes checking for machine/cpufunc.h... yes checking for sched_setscheduler... yes checking for sched_setscheduler in -lposix4... no checking for sched_setscheduler in -lrt... yes checking for i386_get_ioperm in -li386... no checking for i386_get_ioperm in -lc... yes checking for iopl... no checking for ioperm... no checking sys/io.h usability... no checking sys/io.h presence... no checking for sys/io.h... no checking for a parallel port... yes checking linux/i2c-dev.h usability... no checking linux/i2c-dev.h presence... no checking for linux/i2c-dev.h... no checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for sys/io.h... (cached) no checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking kvm.h usability... yes checking kvm.h presence... yes checking for kvm.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/dkstat.h usability... yes checking sys/dkstat.h presence... yes checking for sys/dkstat.h... yes checking for sys/sysctl.h... yes checking for sys/pcpu.h... yes checking for SA_RESTART... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for uid_t in sys/types.h... yes checking whether gcc needs -traditional... no checking return type of signal handlers... void checking for select... yes checking for socket... yes checking for strdup... yes checking for strerror... yes checking for strtol... yes checking for uname... yes checking for cfmakeraw... yes checking for snprintf... yes checking for getopt... yes checking for your mounted filesystem table... /etc/fstab checking for fcntl.h... (cached) yes checking sys/dustat.h usability... no checking sys/dustat.h presence... no checking for sys/dustat.h... no checking for sys/param.h... (cached) yes checking sys/statfs.h usability... no checking sys/statfs.h presence... no checking for sys/statfs.h... no checking sys/fstyp.h usability... no checking sys/fstyp.h presence... no checking for sys/fstyp.h... no checking mnttab.h usability... no checking mnttab.h presence... no checking for mnttab.h... no checking mntent.h usability... no checking mntent.h presence... no checking for mntent.h... no checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking sys/statvfs.h usability... yes checking sys/statvfs.h presence... yes checking for sys/statvfs.h... yes checking sys/vfs.h usability... no checking sys/vfs.h presence... no checking for sys/vfs.h... no checking sys/filsys.h usability... no checking sys/filsys.h presence... no checking for sys/filsys.h... no checking sys/fs_types.h usability... no checking sys/fs_types.h presence... no checking for sys/fs_types.h... no checking for sys/mount.h... yes checking for getmntinfo... yes configure: checking how to get filesystem space usage... checking for statvfs... yes checking module extension... .so checking for dlopen in -ldl... no checking for shl_load in -ldld... no checking if libusb support has been enabled... yes checking for pkg-config... /usr/local/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBUSB... no checking if libftdi support has been enabled... yes checking for LIBFTDI... no checking if libhid support has been enabled... yes checking for LIBHID... no checking if PNG support has been enabled... yes checking for libpng-config... /usr/local/bin/libpng-config checking whether libpng is present and sane... yes checking if freetype support has been enabled... yes checking for freetype-config... /usr/local/bin/freetype-config checking for FreeType -- version >= 7.0.1... yes checking if ethlcd support has been enabled... yes checking for doxygen... no configure: checking which drivers to compile... --------------------------------------- LCDd will be compiled with the drivers: - sdeclcd --------------------------------------- configure: creating ./config.status config.status: creating Makefile config.status: creating shared/Makefile config.status: creating server/Makefile config.status: creating server/commands/Makefile config.status: creating server/drivers/Makefile config.status: creating clients/Makefile config.status: creating clients/lcdproc/Makefile config.status: creating clients/lcdexec/Makefile config.status: creating clients/lcdvc/Makefile config.status: creating clients/examples/Makefile config.status: creating clients/metar/Makefile config.status: creating docs/Makefile config.status: creating docs/Doxyfile config.status: creating docs/lcdproc-dev/Makefile config.status: creating docs/lcdproc-user/Makefile config.status: creating docs/lcdproc-user/drivers/Makefile config.status: creating scripts/Makefile config.status: creating scripts/init-LCDd.LSB config.status: creating scripts/init-lcdproc.LSB config.status: creating scripts/init-lcdexec.LSB config.status: creating scripts/init-lcdvc.LSB config.status: creating scripts/init-LCDd.debian config.status: creating scripts/init-lcdproc.debian config.status: creating scripts/init-lcdexec.debian config.status: creating scripts/init-lcdvc.debian config.status: creating scripts/init-LCDd.rpm config.status: creating scripts/init-lcdproc.rpm config.status: creating config.h config.status: executing depfiles commands [fcm@BSDDev /usr/home/fcm/sdeclcd]$ make make all-recursive Making all in shared ... [fcm@BSDDev /usr/home/fcm/sdeclcd]$ ls -l server/drivers/sdeclcd.so -rwxr-xr-x 1 fcm fcm 13522 Dec 6 21:51 server/drivers/sdeclcd.so -
Does anyone have this in a package yet for pfsense? I would build it my self except I don't currently have a freebsd VM or test machine to test on.
-
The github repository for the sdeclcd is at https://github.com/fmertz/sdeclcd
The code was updated. Check the sdec branch of the project:
https://github.com/fmertz/sdeclcd/tree/sdec
The changes are:
- Rewrite of driver code
- Suppressed user parameter in configuration file to preserve back light
- Added support for more icon codes
- Restored heart beat
- Fixed initialization
- Updated documentation
This is based on the 0.5dev version of the lcdproc upstream project.
The primary purpose of this effort is to submit a working driver to the upstream project. This is why it is a branch off of the latest dev branch.
In parallel, mdima has packaged lcdproc-dev for pfSense. It is based off of lcdproc-0.5.4. This latest driver code is included in mdima's package (I compiled it separately). The discussion is here: http://forum.pfsense.org/index.php/topic,44034.0.html. Big thanks to Stephenw10 and Spy Alelo for live testing on actual hardware, and confirming that the driver works. Basically, if you install the lcdproc-dev package on your Firebox, you should have a working LCD. As simple as that. Feedback most welcome.
PS: The button mapping in the LCDd.conf file might need an adjustment, but should be fixed shortly.
-
The code was updated. Check the sdec branch of the project:
https://github.com/fmertz/sdeclcd/tree/sdec
The primary purpose of this effort is to submit a working driver to the upstream project.
The code was updated again: housekeeping and bug fix.
A little while back, I submitted this code for inclusion into the upstream lcdproc project. I am happy to report that the code was accepted. This means this SDEC driver for Fireboxes is now a part of the official lcdproc project!
-
The code was updated again for supporting LEDs. Details here:
http://forum.pfsense.org/index.php/topic,44034.msg276249.html#msg276249
-
So I installed with the new LCDproc-dev.. All I can get the lcd to do is say "Thanks for using pfSense".
I have different screens checked on the screens tab but can't get it to do anything… buttons don't work.I had this working at one time.. now I am frustrated with it...
Dyno
-
There is a problem with the start sequence. Once your box is up if you go to Status: Services: and restart the lcdproc service it will run correctly.
Steve
-
I rewrote the startup script that lcdproc.inc outputs and fixed the boot issue on Fireboxes and my own units.
You guys will need to check my work and make sure nothing is getting messed up by my changes, but it appears start/stop/restart are working as intended. Something was wrong with the "if X running then kill X" statements. Not sure why the bug was inconsitent with different hardware, but I got it working.
I'll post it when I get home, stuck at work. I've been so busy I haven't even been able to test the xCore-e changes. :-\
-
Steve,
Is there anyway to fix this other than having to do that each time it reboots? This is a firebox for my best friend that I am building to help conserve space in his office.
Dyno
** Nevermind on reboot it works properly now!
Now to find a better and quieter cpu cooler…
-
Here is the "fixed" lcdproc.inc
Not sure if this will work for everyone or if it isn't working right, but let me know how it could be improved.
-
Brak,
I stumbled upon your ebay listings again today looking for a X-E box ;D
you boxes look nice.
-
Brak,
I stumbled upon your ebay listings again today looking for a X-E box ;D
you boxes look nice.
Thanks bud!
I'd probably sell my X-E boxes with pfsense on them, but I'm waiting for 2.1 so the driver is supported properly. So sad that 4 gigabit NICs are basically useless atm! I have 3 fully maxed upgraded ones just looking pretty in a rack :(
-
Try the patched driver. I've put a few 10s of Gigs through mine and hasn't crashed yet. Though I still haven't found a reliable way to crash it with the standard driver. ::)
Steve
-
how can I disable the backlight timer?
I have the backlight set to on, the brightness to 100% and the off-brightness to 100%… tried adding
BackLight=yes
Backlight_Timer=0to the lcdd.conf and still turns off after 30 seconds or so ???
-
If you are using the most recent re-written driver there is a hard coded backlight timer which can't be disabled. Fmertz did it deliberately as the the backlight has a finite (and not that long) life and has already been run for many hours on most peoples boxes. We had a number of failure reports.
Steve
-
its an LED backlight… its lifetime would be about the same as the power LED?...
