Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Almost got Cisco VPN client working, but…pfsense SA failure???

    Scheduled Pinned Locked Moved IPsec
    19 Posts 11 Posters 25.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      carril
      last edited by

      @limecat:

      Im trying to get Cisco VPN client working against pfSense 2.0, and im nearly there– got password prompt, cisco lock icon clicks, and pfsense sees traffic coming through.  Im even seeing traffic flow to pfsense.

      The problem is that no return traffic ever goes.  Under IPsec status, the icon is yellow, and under SAD, the return traffic entry shows no data.  In the IPsec log, I get this:

      Sep 30 23:10:50 	racoon: WARNING: authtype mismatched: my:hmac-md5 peer:hmac-sha
Sep 30 23:10:50 	racoon: WARNING: trns_id mismatched: my:3DES peer:AES
Sep 30 23:10:50 	racoon: ERROR: not matched
........
Sep 30 23:10:50 	racoon: ERROR: not matched
Sep 30 23:10:50 	racoon: INFO: Adjusting my encmode UDP-Tunnel->Tunnel
Sep 30 23:10:50 	racoon: INFO: Adjusting peer's encmode UDP-Tunnel(61443)->Tunnel(1)
Sep 30 23:10:50 	racoon: [Self]: INFO: IPsec-SA established: ESP 98.175.##.###[500]->98.218.###.##[500] spi=32432442(0x1eee13a)
Sep 30 23:10:50 	racoon: [Self]: INFO: IPsec-SA established: ESP 98.175.##.###[500]->98.218.###.##[500] spi=1172355998(0x45e0bb9e)
Sep 30 23:10:54 	racoon: ERROR: no configuration found for 98.218.###.##.
Sep 30 23:10:54 	racoon: ERROR: failed to begin ipsec sa negotication.
Sep 30 23:10:58 	racoon: ERROR: no configuration found for 98.218.###.##.
Sep 30 23:10:58 	racoon: ERROR: failed to begin ipsec sa negotication.

      Those last two entries repeat, seemingly for every piece of traffic that goes through.

      My settings:

      Using Mobile IPsec–
      Providing a virtual IP and DNS
      I followed your steps, and work fine.
      Sorry, could you please let me know how to set a new user an pass.

      Phase 1 settings:
      Interface:  WAN
      Auth Method:  Mutual PSK + Xauth
      Negotiation:  Agressive
      My identifier:  My IP address
      Peer identifier: UDN (user@domain.com)
      preshared key: mypks
      Policy Generation: on
      Proposal checking: obey
      Encryption: AES128, with MD5
      DH key group 2
      Nat Traversal enabled
      DPD on, 5 seconds, 5 retries

      Phase 2:
      Mode: tunnel
      Local network: 0.0.0.0/0
      Protocol: ESP
      Encryption: AES(auto), 3des
      Hash: md5
      PFS off

      Im using the UDN and PKS as the group usernames and passwords.  As I said, I can connect, I just dont get any return traffic.  I have verified that (except for SSH traffic), all ports and protocols on all interfaces and all VPN interfaces are set to "allow".  There are no NAT rules in place, all other settings should be at default.  Additionally, the ShrewSoft VPN client does connect.

      Anyone have any thoughts?

      1 Reply Last reply Reply Quote 0
      • C
        carril
        last edited by

        I followed your steps and works perfectly.
        Could you please let me know where to set up a user and pass ?
        thanks

        1 Reply Last reply Reply Quote 0
        • L
          limecat
          last edited by

          For the user, or the group?

          For the user, create a new user account, and give them IPsec login permissions.

          For the group, I think its the peer identifier.

          1 Reply Last reply Reply Quote 0
          • A
            arthurbrownleeiv
            last edited by

            @limecat:

            Looks like I spoke too soon.  The key, it seems was rebooting pfsense– once the first Cisco VPN client has authed, it works.  But after disconnecting from the VPN, no further connection attempts work.  Im not sure if it only applies to the client that connected, or if all further connection attempts would fail.

            Is there anyone who has access to the Cisco client who is up for some testing with me?  Please let me know, thanks.

            I'm game, as I'm facing the same issue now. This is going to be a big problem for most of our clients, as they all are using the CiscoVPN client.

            1 Reply Last reply Reply Quote 0
            • J
              jarlel
              last edited by

              Hi, did anyone figure out how to set up pfSense so that connecting with a Cisco VPN client works?

              Thanks in advance.

              1 Reply Last reply Reply Quote 0
              • B
                boogieshafer
                last edited by

                this issue sounds similar to the problems i was seeing with the Shrew client where after resets to the pfsense ipsec process i could get the client to connect once and pass traffic, but subsequent connections would connect but fail to pass traffic

                for me the fix for that was, on the pfsense side, try setting the P1 Policy Generation to "unique"

                1 Reply Last reply Reply Quote 0
                • B
                  bdwyer
                  last edited by

                  I used the "unique" change as well as forcing NAT traversal to overcome similar issues.  On the policy tab on the Shrewsoft VPN client I also adjusted it to unique.  After making these two changes, I can consistently connect from my laptop and iPhone.  I don't know what the downside of forcing NAT traversal is other than ditching the delivery characteristics of TCP, however I think for high latency links, NAT-T might actually be necessary.

                  CCNP, MCITP

                  Intel Atom N550 - 2gb DDR3
                  Jetway NC9C-550-LF
                  Antec ISK 300-150
                  HP ProCurve 1810-24
                  Cisco 1841 & 2821, Cisco 3550 x3

                  1 Reply Last reply Reply Quote 0
                  • V
                    vrayanchu
                    last edited by

                    Hi,

                    I am getting the same issue with cisco client, I am able to authenticate the pfsense box but not able to access local lan. I am using client version 5.0.06… ,

                    Please any one can suggest to me.

                    Thanks,
                    vrayanchu

                    1 Reply Last reply Reply Quote 0
                    • valnarV
                      valnar
                      last edited by

                      Anybody figure this out?  Running the latest pfSense 2.01 and I login with my Cisco VPN client, but get the "can't access or ping anything on the Local LAN" issue.

                      Was this patch rolled into 2.01 or something later?
                      http://redmine.pfsense.org/issues/1970

                      1 Reply Last reply Reply Quote 0
                      • jimpJ
                        jimp Rebel Alliance Developer Netgate
                        last edited by

                        As suggested on http://doc.pfsense.org/index.php/Mobile_IPsec_on_2.0 :
                            Policy Generation: Unique
                            Proposal Checking: Strict
                            NAT Traversal: Force

                        Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                        Need help fast? Netgate Global Support!

                        Do not Chat/PM for help!

                        1 Reply Last reply Reply Quote 0
                        • valnarV
                          valnar
                          last edited by

                          I am still having the same problem with using the Cisco VPN client as outlined here:
                          http://blog.benca.net/2012/03/05/serving-ipsec-vpn-with-pfsense/

                          1 Reply Last reply Reply Quote 0
                          • L
                            limecat
                            last edited by

                            I can confirm that this issue occurs with the 2.1 nightly as of 4/23/2013 with the latest Cisco VPN Ipsec client, using Strict / Unique / Force and all options as specified in
                            http://doc.pfsense.org/index.php/Mobile_IPsec_on_2.0

                            If proposal checking is set to "strict", I get

                            Apr 28 12:19:31	racoon: [Self]: INFO: respond new phase 1 negotiation: {Scrubbed}[500]<=>{Scrubbed}[50539]
Apr 28 12:19:31	racoon: INFO: begin Aggressive mode.
Apr 28 12:19:31	racoon: INFO: received Vendor ID: draft-ietf-ipsra-isakmp-xauth-06.txt
Apr 28 12:19:31	racoon: INFO: received Vendor ID: DPD
Apr 28 12:19:31	racoon: INFO: received broken Microsoft ID: FRAGMENTATION
Apr 28 12:19:31	racoon: INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
Apr 28 12:19:31	racoon: INFO: received Vendor ID: CISCO-UNITY
Apr 28 12:19:31	racoon: [{Scrubbed}] INFO: Selected NAT-T version: draft-ietf-ipsec-nat-t-ike-02
Apr 28 12:19:31	racoon: ERROR: no suitable proposal found.
Apr 28 12:19:31	racoon: [{Scrubbed}] ERROR: failed to get valid proposal.
Apr 28 12:19:31	racoon: [{Scrubbed}] ERROR: failed to pre-process ph1 packet [Check Phase 1 settings, lifetime, algorithm] (side: 1, status 1).
Apr 28 12:19:31	racoon: [{Scrubbed}] ERROR: phase1 negotiation failed.

                            If it is set to "obey", the issue described (one correct connection, followed by all others failing) recurs with the following log:

                            Apr 28 12:24:29	racoon: [Self]: INFO: ISAKMP-SA established {SERVER_IP}[4500]-{CLIENT_IP}[59241] spi:7db617222bab00f1:2ca5d8efdb8a9a4a
Apr 28 12:24:29	racoon: INFO: Using port 0
Apr 28 12:24:29	racoon: user 'ipsectest' authenticated
Apr 28 12:24:29	racoon: INFO: login succeeded for user "ipsectest"
Apr 28 12:24:29	racoon: WARNING: Ignored attribute INTERNAL_ADDRESS_EXPIRY
Apr 28 12:24:29	racoon: ERROR: Cannot open "/etc/motd"
Apr 28 12:24:29	racoon: WARNING: Ignored attribute 28683
Apr 28 12:24:29	racoon: WARNING: Ignored attribute 28684
Apr 28 12:24:29	racoon: [Self]: INFO: respond new phase 2 negotiation: {SERVER_IP}[4500]<=>{CLIENT_IP}[59241]
Apr 28 12:24:29	racoon: INFO: Update the generated policy : 10.1.53.1/32[0] 0.0.0.0/0[0] proto=any dir=in
{REPEATS X4}     Apr 28 12:24:29	racoon: ERROR: not matched  	{REPEATS X4}
Apr 28 12:24:29	racoon: INFO: Adjusting my encmode UDP-Tunnel->Tunnel
Apr 28 12:24:29	racoon: INFO: Adjusting peer's encmode UDP-Tunnel(61443)->Tunnel(1)
Apr 28 12:24:29	racoon: WARNING: authtype mismatched: my:hmac-sha peer:hmac-md5
Apr 28 12:24:29	racoon: ERROR: not matched
Apr 28 12:24:29	racoon: INFO: Adjusting peer's encmode UDP-Tunnel(61443)->Tunnel(1)
Apr 28 12:24:29	racoon: [Self]: INFO: IPsec-SA established: ESP {SERVER_IP}[500]->{CLIENT_IP}[500] spi=38303437(0x24876cd)
Apr 28 12:24:29	racoon: [Self]: INFO: IPsec-SA established: ESP {SERVER_IP}[500]->{CLIENT_IP}[500] spi=3442386948(0xcd2ea804)
Apr 28 12:24:30	racoon: ERROR: no configuration found for {CLIENT_IP}.
Apr 28 12:24:30	racoon: ERROR: failed to begin ipsec sa negotication.
Apr 28 12:24:41	racoon: ERROR: no configuration found for {CLIENT_IP}.
Apr 28 12:24:41	racoon: ERROR: failed to begin ipsec sa negotication.
Apr 28 12:24:42	racoon: ERROR: no configuration found for {CLIENT_IP}.
{ad infinitum until disconnect}
{Disconnecting here}
Apr 28 12:29:30	racoon: [98.218.150.61] ERROR: delete payload with invalid doi:0.
Apr 28 12:29:30	racoon: [Self]: INFO: ISAKMP-SA expired {SERVER_IP}[4500]-{CLIENT_IP}[59949] spi:38e4590885e9aa23:bcb3607bd17ead8e
Apr 28 12:29:30	racoon: INFO: deleting a generated policy.
Apr 28 12:29:30	racoon: [Self]: INFO: ISAKMP-SA deleted {SERVER_IP}[4500]-{CLIENT_IP}[59949] spi:38e4590885e9aa23:bcb3607bd17ead8e
Apr 28 12:29:30	racoon: INFO: Released port 0

                            The "warning: authtype mismatched" can be eliminated by switching to MD5, but it doesnt make a difference.  Generating traffic triggers two more "error: failed… error:  no config..." lines in the ipsec log.

                            1 Reply Last reply Reply Quote 0
                            • L
                              limecat
                              last edited by

                              This appears to be a routing issue:  I can do a packet capture on the IPSec interface of pfsense, and I can see incoming pings, and their destination:

                              12:52:18.793013 (authentic,confidential): SPI 0x083c9c1c: IP 10.1.53.1 > {LAN_IP}: ICMP echo request, id 1, seq 1871, length 40
12:52:19.826520 (authentic,confidential): SPI 0x083c9c1c: IP 10.1.53.1 > {LAN_IP}: ICMP echo request, id 1, seq 1872, length 40
12:52:21.329649 (authentic,confidential): SPI 0x083c9c1c: IP 10.1.53.1 > {LAN_IP}: ICMP echo request, id 1, seq 1873, length 40
12:52:23.829947 (authentic,confidential): SPI 0x083c9c1c: IP 10.1.53.1 > {LAN_IP2}: ICMP echo request, id 1, seq 1881, length 40
12:52:25.326576 (authentic,confidential): SPI 0x083c9c1c: IP 10.1.53.1 > {LAN_IP2}: ICMP echo request, id 1, seq 1882, length 40

                              After I disconnect, and have cleared the ipsec log, this appears after a moment or two:

                              Apr 28 12:49:50	racoon: DEBUG: pk_recv: retry[0] recv()
Apr 28 12:49:50	racoon: DEBUG: got pfkey ACQUIRE message
Apr 28 12:49:50	racoon: DEBUG: suitable outbound SP found: 0.0.0.0/0[0] 10.1.53.1/32[0] proto=any dir=out.
Apr 28 12:49:50	racoon: [Unknown Gateway/Dynamic]: DEBUG: sub:0xbfbfe728: 10.1.53.1/32[0] 0.0.0.0/0[0] proto=any dir=in
Apr 28 12:49:50	racoon: [Unknown Gateway/Dynamic]: DEBUG: db :0x28501288: {LAN_SUBNET}/24[0] {LAN_IP}/32[0] proto=any dir=in
Apr 28 12:49:50	racoon: [Unknown Gateway/Dynamic]: DEBUG: sub:0xbfbfe728: 10.1.53.1/32[0] 0.0.0.0/0[0] proto=any dir=in
Apr 28 12:49:50	racoon: [Unknown Gateway/Dynamic]: DEBUG: db :0x28501648: {LAN_IP}/32[0] {LAN_SUBNET}/24[0] proto=any dir=out
Apr 28 12:49:50	racoon: [Unknown Gateway/Dynamic]: DEBUG: sub:0xbfbfe728: 10.1.53.1/32[0] 0.0.0.0/0[0] proto=any dir=in
Apr 28 12:49:50	racoon: [Unknown Gateway/Dynamic]: DEBUG: db :0x285013c8: 10.1.53.1/32[0] 0.0.0.0/0[0] proto=any dir=in
Apr 28 12:49:50	racoon: [Unknown Gateway/Dynamic]: DEBUG: suitable inbound SP found: 10.1.53.1/32[0] 0.0.0.0/0[0] proto=any dir=in.

                              Im not sure if that is relevant or not.

                              1 Reply Last reply Reply Quote 0
                              • First post
                                Last post
                              Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.