LCDProc 0.5.4-dev
-
Only thing I think we can keep from this side-tracking is that the 64-bit SDECLCD works, but it is hard-coded as 16x2 status screens still.
You can ask LCDd what it thinks the width is:
telnet <pfsense host="" ip="" or="" name="">13666 hello connect LCDproc 0.5.4 protocol 0.3 lcd wid 20 hgt 2 cellwid 5 cellhgt 8</pfsense>Output:
[2.0.1-RELEASE][root@fringebox.blizzard]/root(4): telnet 127.0.0.1 13666 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. hello connect LCDproc 0.5.5 protocol 0.3 lcd wid 20 hgt 2 cellwid 5 cellhgt 8Examples: (Kinda bad example, but it at least shows the screens are shortened. I know things are getting cut off since I can't change the "pfsense shutting down" to be any bigger without losing the extra 8 characters on the end. The Lanner-LCM hacked driver can write the shutdown line on all the 20x2 characters just fine)
Off center, not showing screens to be big enough:
Clearly addresses the extra characters with other displays:
-
Not a driver problem then.
Are you sure it ever shows more characters than that? The screens are always drawn from the left side.
E.g.
Steve
-
Brak,
If you want to point me to the hacked Lanner code again, I can have a quick look. Without hardware available to me though, this is quickly becoming unproductive. I am in the mid-atlantic US, maybe you should look up shipping rates and mail me a stripped down box for development. I could probably get the full LCD and LED control coded in the driver for 32 and 64 bit. Up to you.
-
I think the issue was just with my implementation. No use you guys wasting time on my hardware.
I did notice the issue with lcdproc crashing on the initial boot, then later restarting into just the LCDd server/client menu. Once I start the service once, it's seemingly good forever (at least until an unlucky interface up/down!)
Is there anything I should try and look at to see why it's failing at the initial boot?
Also, is there any way we could get LCDExec to be included in the package (both 32bit/64bit, 32bit does NOT work on 64bit in my experience - makes no sense?), and have it check for an lcdexec.conf (and if it exists, start the process running that config right after lcdproc starts?) My menu system would be more easily implemented if we could get everyone already have a working lcdexec install. 80% of my installation scripts are just hacking in the lcdexec install.
-
There has to be something wrong with the rc.d or PHP scripts, but I just can't find it. Could it be the interface up/downs on boot causing this crash?
-
Alright, nevermind on the lcdexec stuff, I'm an idiot. It's already in /usr/bin/ for everyone.
But, as for the service crashing on boot, it still appears to happen. I've noticed it does not happen on full (x64) installs, but my nanoBSD installs require a service restart to get working after boot.
Any ideas?
-
Time for a code release:
I just posted the ledsupport branch of the lcdproc package source code on github:
https://github.com/fmertz/sdeclcd/tree/ledsupport
Basically, this code adds driver support for known Firebox LED arrangements, from X-Core to X-Core-e to X-Peak and finally XTM. The code identifies the particular Intel Southbridge/ICH, and matches it up with specific GPIO pins as posted on this forum. It deals with ICH and SuperIO GPIO. As I only own an X-Core-e, it is not all completely tested.
There is a binary here: https://github.com/downloads/fmertz/sdeclcd/sdeclcd.so
If you can assist in the testing, replace your copy of the driver with this one, and give it a try:
telnet localhost 13666 hello connect LCDproc 0.5.5 protocol 0.3 lcd wid 20 hgt 2 cellwid 5 cellhgt 8 output 1 <—Should start blinking red, rare short blink success output 2 <—Should start blinking green, rare short blink successThe output logic is this: we have 32 bit to work with, and we need 3 states (Red, Green and off). This is 2 bits. So, in 32 bits, we have 16 time slots to work with. So, basically, code in the sequence of colors you want to see (Red, Green or off) and keep shifting to fill in the bits.
Worksheet:
XXXX XXXX XXXX XXXX
X is 1, 2 or 00000 0000 0000 0001 is slow quick blink red
0101 0101 0101 0101 is fast quick blink red
0011 0011 0011 0011 is medium medium blink red
0000 1111 0000 1111 is slow long blink red
0000 2222 0000 1111 is slow blink alternating between red and greenetc… The binary needs to be made decimal for the “output” command. Sequence lasts about 4 seconds.
As we know, there is no client yet that exercises this driver "output" feature. If this works with various models, I'll submit a pull request with the pfSense team so that new package installations will get this binary.
Anyone wants to add LED support to the PHP client? Something like controlling the LED based on availability of internet access, or the ISP's DNS server would be nice...
-
Here is an lcdproc.inc that seems to fix the startup crash issue.
Not sure if this will work for everyone or if it isn't working right, but let me know how it could be improved.
It generates this rc.d script:
#!/bin/sh #!/bin/sh # This file was automatically generated # by the pfSense service handler. rc_start() { sleep 5 /usr/bin/nice -20 /usr/local/sbin/LCDd -c /usr/local/etc/LCDd.conf /usr/bin/nice -20 /usr/local/bin/php -f /usr/local/pkg/lcdproc_client.php & } rc_stop() { pkill -f lcdproc_client.php pkill -anx lcdexec pkill -anx lcdproc pkill -anx LCDd sleep 1 } case $1 in start) rc_start ;; stop) rc_stop ;; restart) rc_stop rc_start ;; esac -
Not sure if this is the correct place to post this question but I'm new here so any help would be much appreciated. I have a crystalfontz 634 running on pfsense 2.0.1 amd64 with LCDproc 0.5.5 pkg v. 0.9.4 installed. At startup I see the crystalfontz info come up, then the blinking light in the top left. After pfsense and LCDproc start up I see a bunch of garbage characters scroll down the lcd for like thirty seconds then just a blank screen. I'm pretty sure I've got the right usb com port as the top left blinking light will just keep on if I switch to another one. From the web settings I have it set to 4x20, CrystalFontz driver, 5 sec refresh, 9600 baud (tried default, same thing) and then default on the rest of the settings. For screens I have "Enable Traffic Interface, WAN" and "Enable Hostname". Here's the contents of LCDd.conf:
[server] DriverPath=/usr/local/lib/lcdproc/ Driver=CFontz Bind=127.0.0.1 Port=13666 ReportLevel=3 ReportToSyslog=yes User=nobody Foreground=no ServerScreen=no GoodBye="Thanks for using" GoodBye=" pfSense " WaitTime=5 ToggleRotateKey=Enter PrevScreenKey=Left NextScreenKey=Right ScrollUpKey=Up ScrollDownKey=Down [menu] MenuKey=Escape EnterKey=Enter UpKey=Up DownKey=Down [CFontz] Device=/dev/cuaU0 Size=20x4 Contrast=350 Brightness=1000 OffBrightness=50 NewFirmware=no Reboot=no Speed=9600Anybody have any ideas about why it's doing this?
-
Ok, if anyone else has a crystalfontz 634: make sure you set the contrast over 50% or you won't see ANYTHING. DON'T LEAVE IT ON DEFAULT.
-
Bumping this so people can see and try my fixed lcdproc.inc
I was wondering if we could get that and the 64bit SDECLCD driver put in the real package.
-
Hmm, this looks like spam but doesn't have any links. :-
Please re-phrase this if you are really asking.Steve
Edit: It was spam then! ::)
-
Hi !
congratulations for the work !
I am Celestix Scoprio X MSA 5000 user and the box run very nice with pfsense 2.0.1
…but..the lcd display don't work !
I tried different drivers ... but nothing ...
is a USB display of 40 x 2 (with 3 led for (1) attention / (2) HDD / (3) ON )
Would it be possible to control it with lcdproc?
Many Thanks ! -
Possibly. We need more information. Anything written on the the LCD unit itself? Any windows drivers that might provide a clue?
Steve
-
Possibly. We need more information. Anything written on the the LCD unit itself? Any windows drivers that might provide a clue?
Steve
The display manufactured is varitronix
Unfortunately, I have never written anything …
you can not find any drivers...even windows ... -
The Varitronix MGLS19264 used in this box appears to use a HD61202 chip which is compatible with the KS108. This is a graphical LCD and lcdproc is setup to drive character based displays. However all may not be lost. It might work using the glcdlib driver:
http://lcdproc.sourceforge.net/docs/stable-0-5-x-user.html#glcdlib-howto
This appears to support the ks0108. However it looks like there would be quite a lot of additional packages/drivers needed.
This is beyond my usual level of tinkering. ;)Steve
-
The Varitronix MGLS19264 used in this box appears to use a HD61202 chip which is compatible with the KS108. This is a graphical LCD and lcdproc is setup to drive character based displays. However all may not be lost. It might work using the glcdlib driver:
http://lcdproc.sourceforge.net/docs/stable-0-5-x-user.html#glcdlib-howto
This appears to support the ks0108. However it looks like there would be quite a lot of additional packages/drivers needed.
This is beyond my usual level of tinkering. ;)Steve
Many Thank for the Info !
I can Try ! -
Crystalfontz released the new 735, they are much better in quality and can emulate 635, but not 100% AFAIK.
I hope they gets supported.
See the quality:
https://www.crystalfontz.com/phpthumb/phpThumb.php?id=2235 -
I was looking to see if there was a new thread for the 0.5.5 package and couldnt find it so I could post this question in it. Maybe search fail on my end not sure,
Would someone know how to get this to work with LCD Proc?
http://forum.pfsense.org/index.php/topic,56419.msg301162.html#msg301162
-
Any news / progress on the 4 Leds of the CFA635 ?
I modified the lcdproc_client.php to work with the CFA635 (driver CFontzPacket) inclusive the 4 LEDs. I also changed the IPSec detection for the IPSec screen (it was not working in the current version).
Led 1 : CPU usage
Led 2 : Interface status
Led 3 : IPSec status
Led 4 : Gateway statusMaybe someone can include this into the package ?
/* $Id$ */ /* lcdproc_client.php Copyright (C) 2007 Seth Mos <seth.mos@xs4all.nl>Copyright (C) 2012 Michele Di Maria <michele@nt2.it>All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1\. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2\. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* trick interface into running this. we are only * calling from useland so this is not a security issue */ require_once("config.inc"); require_once("functions.inc"); require_once("interfaces.inc"); require_once("ipsec.inc"); require_once("/usr/local/pkg/lcdproc.inc"); function get_pfstate() { global $config; $matches = ""; if (isset($config['system']['maximumstates']) and $config['system']['maximumstates'] > 0) $maxstates="/{$config['system']['maximumstates']}"; else $maxstates="/". pfsense_default_state_size(); $curentries = `/sbin/pfctl -si |grep current`; if (preg_match("/([0-9]+)/", $curentries, $matches)) { $curentries = $matches[1]; } return $curentries . $maxstates; } function disk_usage() { $dfout = ""; exec("/bin/df -h | /usr/bin/grep -w '/' | /usr/bin/awk '{ print $5 }' | /usr/bin/cut -d '%' -f 1", $dfout); $diskusage = trim($dfout[0]); return $diskusage; } function mem_usage() { $memory = ""; exec("/sbin/sysctl -n vm.stats.vm.v_page_count vm.stats.vm.v_inactive_count " . "vm.stats.vm.v_cache_count vm.stats.vm.v_free_count", $memory); $totalMem = $memory[0]; $availMem = $memory[1] + $memory[2] + $memory[3]; $usedMem = $totalMem - $availMem; $memUsage = round(($usedMem * 100) / $totalMem, 0); return $memUsage; } /* Calculates non-idle CPU time and returns as a percentage */ function cpu_usage() { $duration = 250000; $diff = array('user', 'nice', 'sys', 'intr', 'idle'); $cpuTicks = array_combine($diff, explode(" ", `/sbin/sysctl -n kern.cp_time`)); usleep($duration); $cpuTicks2 = array_combine($diff, explode(" ", `/sbin/sysctl -n kern.cp_time`)); $totalStart = array_sum($cpuTicks); $totalEnd = array_sum($cpuTicks2); // Something wrapped ?!?! if ($totalEnd <= $totalStart) return 0; // Calculate total cycles used $totalUsed = ($totalEnd - $totalStart) - ($cpuTicks2['idle'] - $cpuTicks['idle']); // Calculate the percentage used $cpuUsage = floor(100 * ($totalUsed / ($totalEnd - $totalStart))); return $cpuUsage; } function get_uptime_stats() { exec("/usr/bin/uptime", $output, $ret); $temp = explode(",", $output[0]); if(stristr($output[0], "day")) { $status = "$temp[0] $temp[1]"; } else { $status = "$temp[0] "; } $status = trim(str_replace(" ", " ", $status)); $status = substr($status, strpos($status, "up ") + 3); return($status); } function get_loadavg_stats() { exec("/usr/bin/uptime", $output, $ret); if(stristr($output[0], "day")) { $temp = explode(" ", $output[0]); $status = "$temp[11] $temp[12] $temp[13]"; } else { $temp = explode(" ", $output[0]); $status = "$temp[10] $temp[11] $temp[12]"; } return($status); } function get_mbuf_stats() { exec("netstat -mb | grep \"mbufs in use\" | awk '{ print $1 }' | cut -d\"/\" -f1", $mbufs_inuse); exec("netstat -mb | grep \"mbufs in use\" | awk '{ print $1 }' | cut -d\"/\" -f3", $mbufs_total); $status = "$mbufs_inuse[0] \/ $mbufs_total[0]"; return($status); } function get_version() { global $g; $version = @file_get_contents("/etc/version"); $version = trim($version); return("{$g['product_name']} {$version}"); } function get_cpufrequency(){ $cpufreqs = ""; exec("/sbin/sysctl -n dev.cpu.0.freq_levels", $cpufreqs); $cpufreqs = explode(" ", trim($cpufreqs[0])); $maxfreq = explode("/", $cpufreqs[0]); $maxfreq = $maxfreq[0]; $curfreq = ""; exec("/sbin/sysctl -n dev.cpu.0.freq", $curfreq); $curfreq = trim($curfreq[0]); $status = "$curfreq\/$maxfreq Mhz"; return($status); } function get_cpufrequency_perc(){ $cpufreqs = ""; exec("/sbin/sysctl -n dev.cpu.0.freq_levels", $cpufreqs); $cpufreqs = explode(" ", trim($cpufreqs[0])); $maxfreq = explode("/", $cpufreqs[0]); $maxfreq = $maxfreq[0]; $curfreq = ""; exec("/sbin/sysctl -n dev.cpu.0.freq", $curfreq); $curfreq = trim($curfreq[0]); $status = $curfreq/$maxfreq * 100; return($status); } function get_interfaces_stats() { global $g; global $config; $ifstatus = array(); $i = 0; $ifdescrs = array('wan' => 'WAN', 'lan' => 'LAN'); for ($j = 1; isset($config['interfaces']['opt' . $j]); $j++) { $ifdescrs['opt' . $j] = $config['interfaces']['opt' . $j]['descr']; } foreach ($ifdescrs as $ifdescr => $ifname){ $ifinfo = get_interface_info($ifdescr); if($ifinfo['status'] == "up") { $online = "Up"; } else { $online = "Down"; } if(!empty($ifinfo['ipaddr'])) { $ip = htmlspecialchars($ifinfo['ipaddr']); } else { $ip = "-"; } $ifstatus[] = htmlspecialchars($ifname) ." [$online]"; } $status = " ". implode(", ", $ifstatus); return($status); } function get_slbd_stats() { global $g; global $config; if (!is_array($config['load_balancer']['lbpool'])) { $config['load_balancer']['lbpool'] = array(); } $a_pool = &$config['load_balancer']['lbpool']; $slbd_logfile = "{$g['varlog_path']}/slbd.log"; $nentries = $config['syslog']['nentries']; if (!$nentries) $nentries = 50; $now = time(); $year = date("Y"); $pstatus = ""; $i = 0; foreach ($a_pool as $vipent) { $pstatus[] = "{$vipent['name']}"; if ($vipent['type'] == "gateway") { $poolfile = "{$g['tmp_path']}/{$vipent['name']}.pool"; if(file_exists("$poolfile")) { $poolstatus = file_get_contents("$poolfile"); } else { continue; } foreach ((array) $vipent['servers'] as $server) { $lastchange = ""; $svr = split("\|", $server); $monitorip = $svr[1]; if(stristr($poolstatus, $monitorip)) { $online = "Up"; } else { $online = "Down"; } $pstatus[] = strtoupper($svr[0]) ." [{$online}]"; } } else { $pstatus[] = "{$vipent['monitor']}"; } } if(count($a_pool) == 0) { $pstatus[] = "Disabled"; } $status = implode(", ", $pstatus); return($status); } function get_carp_stats () { global $g; global $config; if(is_array($config['virtualip']['vip'])) { $carpint = 0; $initcount = 0; $mastercount = 0; $backupcount = 0; foreach($config['virtualip']['vip'] as $carp) { if ($carp['mode'] != "carp") { continue; } $ipaddress = $carp['subnet']; $password = $carp['password']; $netmask = $carp['subnet_bits']; $vhid = $carp['vhid']; $advskew = $carp['advskew']; $carp_int = find_carp_interface($ipaddress); $status = get_carp_interface_status($carp_int); switch($status) { case "MASTER": $mastercount++; break; case "BACKUP": $backupcount++; break; case "INIT": $initcount++; break; } } $status = "M/B/I {$mastercount}/{$backupcount}/{$initcount}"; } else { $status = "CARP Disabled"; } return($status); } function get_ipsec_tunnel_sad() { /* query SAD */ if(file_exists("/usr/local/sbin/setkey")) $fd = @popen("/usr/local/sbin/setkey -D", "r"); else $fd = @popen("/sbin/setkey -D", "r"); $sad = array(); if ($fd) { while (!feof($fd)) { $line = chop(fgets($fd)); if (!$line) continue; if ($line == "No SAD entries.") break; if ($line[0] != "\t") { if (is_array($cursa)) $sad[] = $cursa; $cursa = array(); list($cursa['src'],$cursa['dst']) = explode(" ", $line); $i = 0; } else { $linea = explode(" ", trim($line)); if ($i == 1) { $cursa['proto'] = $linea[0]; $cursa['spi'] = substr($linea[2], strpos($linea[2], "x")+1, -1); } else if ($i == 2) { $cursa['ealgo'] = $linea[1]; } else if ($i == 3) { $cursa['aalgo'] = $linea[1]; } } $i++; } if (is_array($cursa) && count($cursa)) $sad[] = $cursa; pclose($fd); } return($sad); } function get_ipsec_tunnel_src($tunnel) { global $g, $config, $sad; $if = "WAN"; if ($tunnel['interface']) { $if = $tunnel['interface']; $realinterface = convert_friendly_interface_to_real_interface_name($if); $interfaceip = find_interface_ip($realinterface); } return $interfaceip; } function output_ipsec_tunnel_status($tunnel) { global $g, $config, $sad; $if = "WAN"; $interfaceip = get_ipsec_tunnel_src($tunnel); $foundsrc = false; $founddst = false; if(!is_array($sad)) { /* we have no sad array, bail */ return(false); } foreach($sad as $sa) { if($sa['src'] == $interfaceip) $foundsrc = true; if($sa['dst'] == $tunnel['remote-gateway']) $founddst = true; } if($foundsrc && $founddst) { /* tunnel is up */ $iconfn = "pass"; return(true); } else { /* tunnel is down */ $iconfn = "reject"; return(false); } } function get_ipsec_stats_old() { global $g, $config, $sad; $sad = array(); $sad = get_ipsec_tunnel_sad(); $activecounter = 0; $inactivecounter = 0; if($config['ipsec']['tunnel']) { foreach ($config['ipsec']['tunnel'] as $tunnel){ $ipsecstatus = false; $tun_disabled = "false"; $foundsrc = false; $founddst = false; if (isset($tunnel['disabled'])) { $tun_disabled = "true"; continue; } if(output_ipsec_tunnel_status($tunnel)) { /* tunnel is up */ $iconfn = "true"; $activecounter++; } else { /* tunnel is down */ $iconfn = "false"; $inactivecounter++; } } } if (is_array($config['ipsec']['tunnel'])) { $status = "Up/Down $activecounter/$inactivecounter"; } else { $status = "Up/Down $activecounter/$inactivecounter";//"IPSEC Disabled"; } return($status); } function get_ipsec_stats() { global $config; if (isset($config['ipsec']['phase1'])){ $spd = ipsec_dump_spd(); $sad = ipsec_dump_sad(); $activecounter = 0; $inactivecounter = 0; foreach ($config['ipsec']['phase2'] as $ph2ent){ ipsec_lookup_phase1($ph2ent,$ph1ent); $ipsecstatus = false; $tun_disabled = "false"; $foundsrc = false; $founddst = false; if (isset($ph1ent['disabled']) || isset($ph2ent['disabled'])) { $tun_disabled = "true"; continue; } if(ipsec_phase2_status($spd,$sad,$ph1ent,$ph2ent)) { /* tunnel is up */ $iconfn = "true"; $activecounter++; } else { /* tunnel is down */ $iconfn = "false"; $inactivecounter++; } } } if (isset($config['ipsec']['phase1'])){ $status = "Up/Down $activecounter/$inactivecounter"; } else { $status = "IPSEC Disabled"; } return($status); } /* Define functions */ function send_lcd_commands($lcd, $lcd_cmds) { if(!is_array($lcd_cmds) || (empty($lcd_cmds))) { lcdproc_warn("Failed to interpret lcd commands"); return; } while (($cmd_output = fgets($lcd, 8000)) !== false) { if(preg_match("/^huh?/", $cmd_output)) { lcdproc_notice("LCDd output: \"$cmd_output\". Executed \"$lcd_cmd\""); } } foreach($lcd_cmds as $lcd_cmd) { if(! fwrite($lcd, "$lcd_cmd\n")) { lcdproc_warn("Connection to LCDd process lost $errstr ($errno)"); $lcdproc_connect_errors++; return false; } } return true; } function get_lcdpanel_width(){ global $config; $lcdproc_size_config = $config['installedpackages']['lcdproc']['config'][0]; if (is_null($lcdproc_size_config['size'])) { return "16"; } else { $dimensions = split("x", $lcdproc_size_config['size']); return $dimensions[0]; } } function get_lcdpanel_height(){ global $config; $lcdproc_size_config = $config['installedpackages']['lcdproc']['config'][0]; if (is_null($lcdproc_size_config['size'])) { return "2"; } else { $dimensions = split("x", $lcdproc_size_config['size']); return $dimensions[1]; } } function get_lcdpanel_refresh_frequency(){ global $config; $lcdproc_size_config = $config['installedpackages']['lcdproc']['config'][0]; $value = $lcdproc_size_config['refresh_frequency']; if (is_null($value)) { return "5"; } else { return $value; } } function outputled_enabled_CFontzPacket(){ global $config; $lcdproc_config = $config['installedpackages']['lcdproc']['config'][0]; $value = $lcdproc_config['outputleds']; if (is_null($value)) {return false;} else { if ($value && $lcdproc_config['driver'] == "CFontzPacket") {return true;} else {return false;} } } function outputled_enabled_CFontz633(){ global $config; $lcdproc_config = $config['installedpackages']['lcdproc']['config'][0]; $value = $lcdproc_config['outputleds']; if (is_null($value)) {return false;} else { if ($value && $lcdproc_config['driver'] == "CFontz633") {return true;} else {return false;} } } function outputled_carp () { /* Returns the status of CARP for the box. Assumes ALL CARP status are the same for all the intefaces. -1 = CARP Disabled 0 = CARP on Backup 1 = CARP on Master */ global $g; global $config; if(is_array($config['virtualip']['vip'])) { $carpint = 0; foreach($config['virtualip']['vip'] as $carp) { if ($carp['mode'] != "carp") { continue; } $carp_int = find_carp_interface($carp['subnet']); $status = get_carp_interface_status($carp_int); switch($status) { case "MASTER": return 1; break; case "BACKUP": return 0; break; } } } else { return -1; } } function outputled_ipsec () { /* Returns the status of CARP for the box. Assumes ALL CARP status are the same for all the intefaces. -1 = IPSec Disabled 0 = IPSecot least one Tunnel Error 1 = IPSec all Tunnes up */ global $g; global $config; global $config; if (isset($config['ipsec']['phase1'])){ $spd = ipsec_dump_spd(); $sad = ipsec_dump_sad(); $activecounter = 0; $inactivecounter = 0; foreach ($config['ipsec']['phase2'] as $ph2ent){ ipsec_lookup_phase1($ph2ent,$ph1ent); $ipsecstatus = false; $tun_disabled = "false"; $foundsrc = false; $founddst = false; if (isset($ph1ent['disabled']) || isset($ph2ent['disabled'])) { $tun_disabled = "true"; continue; } if(ipsec_phase2_status($spd,$sad,$ph1ent,$ph2ent)) { /* tunnel is up */ $iconfn = "true"; $activecounter++; } else { /* tunnel is down */ $iconfn = "false"; $inactivecounter++; } } } if (isset($config['ipsec']['phase1'])){ if ($inactivecounter == 0) { return 1; } else { return 0; } } else { return -1; } } function outputled_gateway() { /* Returns the status of the gateways. -1 = No gateway defined 0 = At least 1 gateway down or with issues 1 = All gateway up */ global $g; global $config; $gateways_status = array(); $gateways_status = return_gateways_status(true); foreach ($a_gateways as $gname => $gateway) { if ($gateways_status[$gname]['status'] != "none") { return 0; } } return 1; } function get_traffic_stats(&$in_data, &$out_data){ global $config; global $traffic_last_ugmt, $traffic_last_ifin, $traffic_last_ifout; $lcdproc_screen_config = $config['installedpackages']['lcdprocscreens']['config'][0]; /* read the configured interface */ $ifnum = $lcdproc_screen_config['scr_traffic_interface']; /* get the real interface name (code from ifstats.php)*/ $realif = get_real_interface($ifnum); if(!$realif) $realif = $ifnum; // Need for IPSec case interface. /* get the interface stats (code from ifstats.php)*/ $ifinfo = pfSense_get_interface_stats($realif); /* get the current time (code from ifstats.php)*/ $temp = gettimeofday(); $timing = (double)$temp["sec"] + (double)$temp["usec"] / 1000000.0; /* calculate the traffic stats */ $deltatime = $timing - $traffic_last_ugmt; $in_data = "IN: " . formatSpeedBits(((double)$ifinfo['inbytes']-$traffic_last_ifin)/$deltatime); $out_data = "OUT: " . formatSpeedBits(((double)$ifinfo['outbytes']-$traffic_last_ifout)/$deltatime); $traffic_last_ugmt = $timing; $traffic_last_ifin = (double)$ifinfo['inbytes']; $traffic_last_ifout = (double)$ifinfo['outbytes']; } function formatSpeedBits($speed) { /* format speed in bits/sec, input: bytes/sec Code from: graph.php ported to PHP*/ if ($speed < 125000) {return sprintf("%3d.1 Kbps", $speed / 125);} if ($speed < 125000000) {return sprintf("%3d.1 Mbps", $speed / 125000);} // else return sprintf("%3d.1 Gbps", $speed / 125000000); } function add_summary_declaration(&$lcd_cmds, $name) { $lcdpanel_height = get_lcdpanel_height(); $lcdpanel_width = get_lcdpanel_width(); if ($lcdpanel_height >= "4") { $lcd_cmds[] = "widget_add $name title_summary string"; $lcd_cmds[] = "widget_add $name text_summary string"; if ($lcdpanel_width > "16") {$lcd_cmds[] = "widget_set $name title_summary 1 3 \"CPU MEM STATES FREQ\"";} else {$lcd_cmds[] = "widget_set $name title_summary 1 3 \"CPU MEM STATES\"";} } } function add_summary_values(&$lcd_cmds, $name, $lcd_summary_data) { if ($lcd_summary_data != "") { $lcd_cmds[] = "widget_set $name text_summary 1 4 \"{$lcd_summary_data}\""; } } function build_interface($lcd) { global $g; global $config; $lcdproc_screens_config = $config['installedpackages']['lcdprocscreens']['config'][0]; $refresh_frequency = get_lcdpanel_refresh_frequency() * 8; $lcd_cmds = array(); $lcd_cmds[] = "hello"; $lcd_cmds[] = "client_set name pfSense"; /* process screens to display */ if(is_array($lcdproc_screens_config)) { foreach($lcdproc_screens_config as $name => $screen) { if($screen == "on") { switch($name) { case "scr_version": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"Welcome to\""; break; case "scr_time": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ System Time\""; break; case "scr_uptime": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ System Uptime\""; break; case "scr_hostname": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ System Name\""; break; case "scr_system": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ System Stats\""; break; case "scr_disk": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ Disk Use\""; break; case "scr_load": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ Load Averages\""; break; case "scr_states": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ Traffic States\""; break; case "scr_carp": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ CARP State\""; break; case "scr_ipsec": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ IPsec Tunnels\""; break; case "scr_slbd": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ Load Balancer\""; break; case "scr_interfaces": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ Interfaces\""; break; case "scr_mbuf": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ MBuf Usage\""; break; case "scr_cpufrequency": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ CPU Frequency\""; break; case "scr_traffic": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt string"; break; } add_summary_declaration($lcd_cmds, $name); } } } send_lcd_commands($lcd, $lcd_cmds); } function loop_status($lcd) { global $g; global $config; global $lcdproc_connect_errors; $lcdproc_screens_config = $config['installedpackages']['lcdprocscreens']['config'][0]; $lcdpanel_width = get_lcdpanel_width(); $lcdpanel_height = get_lcdpanel_height(); if(empty($g['product_name'])) { $g['product_name'] = "pfSense"; } $refresh_frequency = get_lcdpanel_refresh_frequency(); /* keep a counter to see how many times we can loop */ $i = 1; while($i) { /* prepare the summary data */ if ($lcdpanel_height >= "4") { $summary_states = split("/",get_pfstate()); $lcd_summary_data = sprintf("%02d%% %02d%% %6d", cpu_usage(), mem_usage(), $summary_states[0]); if ($lcdpanel_width > "16") { $lcd_summary_data = $lcd_summary_data . sprintf(" %3d%%", get_cpufrequency_perc()); } } else { $lcd_summary_data = "";} $lcd_cmds = array(); /* initializes the widget counter */ $widget_counter = 0; /* controls the output leds */ if (outputled_enabled_CFontz633() | outputled_enabled_CFontzPacket()) { $led_output_value = 0; /* LED 1: CPU Usage */ if (cpu_usage() > 50) {$led_output_value = $led_output_value + pow(2, 4);} else {$led_output_value = $led_output_value + pow(2, 0);} /* LED 2: Interface status */ if (substr_count(get_interfaces_stats(), "Down") > 0 ) {$led_output_value = $led_output_value + pow(2, 5);} else {$led_output_value = $led_output_value + pow(2, 1);} /* LED 3: IPSec status */ switch (outputled_ipsec ()) { case -1:/* IPSec disabled */ case 0: /* IPSec at least one Tunnel with error */ {$led_output_value = $led_output_value + pow(2, 6);} case 1: /* IPSec all Tunnel up */ {$led_output_value = $led_output_value + pow(2, 2);} } /* LED 4: Gateway status */ switch (outputled_gateway()) { case -1:/* Gateways not configured */ case 0: /* Gateway down or with issues */ {$led_output_value = $led_output_value + pow(2, 7);} case 1: /* All Gateways up */ {$led_output_value = $led_output_value + pow(2, 3);} } /* Sends the command to the panel */ $lcd_cmds[] = "output {$led_output_value}"; //$lcd_cmds[] = "output {1111 1111}"; } /* process screens to display */ foreach((array) $lcdproc_screens_config as $name => $screen) { if($screen != "on") { continue; } switch($name) { case "scr_version": $version = get_version(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$version}\""; break; case "scr_time": $time = date("n/j/Y H:i"); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$time}\""; break; case "scr_uptime": $uptime = get_uptime_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$uptime}\""; break; case "scr_hostname": exec("/bin/hostname", $output, $ret); $hostname = $output[0]; $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$hostname}\""; break; case "scr_system": $processor = cpu_usage(); $memory = mem_usage(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"CPU {$processor}%, Mem {$memory}%\""; break; case "scr_disk": $disk = disk_usage(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"Disk {$disk}%\""; break; case "scr_load": $loadavg = get_loadavg_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$loadavg}\""; break; case "scr_states": $states = get_pfstate(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"Cur/Max {$states}\""; break; case "scr_carp": $carp = get_carp_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$carp}\""; break; case "scr_ipsec": $ipsec = get_ipsec_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$ipsec}\""; break; case "scr_slbd": $slbd = get_slbd_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$slbd}\""; break; case "scr_interfaces": $interfaces = get_interfaces_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$interfaces}\""; break; case "scr_mbuf": $mbufstats = get_mbuf_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$mbufstats}\""; break; case "scr_cpufrequency": $cpufreq = get_cpufrequency(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$cpufreq}\""; break; case "scr_traffic": get_traffic_stats($in_data, $out_data); $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"{$in_data}\""; $lcd_cmds[] = "widget_set $name text_wdgt 1 2 \"{$out_data}\""; break; } if ($name != "scr_traffic_interface") { $widget_counter++; add_summary_values($lcd_cmds, $name, $lcd_summary_data); } } if (send_lcd_commands($lcd, $lcd_cmds)) { $lcdproc_connect_errors = 0; // Reset the error counter } else { //an error occurred return; } if (($refresh_frequency * $widget_counter) > 5) { sleep(5); } else { sleep($refresh_frequency * $widget_counter); } $i++; } } /* Initialize the wan traffic counters */ $traffic_last_ugmt = 0; $traffic_last_ifin = 0; $traffic_last_ifout = 0; /* Initialize the global error counter */ $lcdproc_connect_errors = 0; $lcdproc_max_connect_errors = 3; /* Connect to the LCDd port and interface with the LCD */ while ($lcdproc_connect_errors <= $lcdproc_max_connect_errors) { lcdproc_warn("Start client procedure. Error counter: ($lcdproc_connect_errors)"); sleep(1); $lcd = fsockopen(LCDPROC_HOST, LCDPROC_PORT, $errno, $errstr, 10); stream_set_timeout($lcd, 0 , 25000); // Sets the socket timeout as 25ms if (!$lcd) { lcdproc_warn("Failed to connect to LCDd process $errstr ($errno)"); $lcdproc_connect_errors++; } else { build_interface($lcd); loop_status($lcd); fclose($lcd); } } if ($lcdproc_connect_errors >= $lcdproc_max_connect_errors) { lcdproc_warn("Too many errors, the client ends."); } ?></michele@nt2.it></seth.mos@xs4all.nl>This works Great even on latest version of DEV package. Thanks for posting this! Its nice to have the lights working and doing something useful. Anyone know how I could edit this further to show Open VPN for that LED instead of IPSEC and then gateway status show if snort is running or not? Snort fails sometimes after updates and it would be nice to have green running and red light not running.. Also as an added bonus it would be nice to have an openvpn screen that shows users ect. I know that is diff and would most likely take more work but would be good to have .. Any help would be greatly appreciated.
