Kernel: msk1: watchdog timeout

wallabybob

I've made the command and the output is exactly as your, so I think that /boot/loader.conf.local doesn't works (in fact this night crashes again)..

/boot/loader.conf.local is processed only at boot time. Hence your change to it won't take effect until the system is rebooted.

When you wrote "I think that /boot/loader.conf.local doesn't works" did you mean (assuming you rebooted so the changed file would take effect)
1. the change didn't stop the crash?
2. the change didn't seem to affect the sysctl values?

Gabri.91

@wallabybob:

/boot/loader.conf.local is processed only at boot time. Hence your change to it won't take effect until the system is rebooted.
When you wrote "I think that /boot/loader.conf.local doesn't works" did you mean (assuming you rebooted so the changed file would take effect)
1. the change didn't stop the crash?
2. the change didn't seem to affect the sysctl values?

Logically I've rebooted the pfSense..
I mean all two things: the change didn't stop the crash and the change didn't seem to affect the sysctl values

Gabri.91

There is no solution? The problem still remains..

stephenw10

I have a patched msk driver I made for the firebox NICs you could try. I also modified the LED register settings but that won't effect the operation. See:
http://forum.pfsense.org/index.php/topic,20095.msg273691.html#msg273691
I have not yet had any reports of it working or not.

Steve

Gabri.91

Ok, I can try with that but why loader.conf.local settings aren't loaded?
I prefer to try with that before patch driver..

stephenw10

Some random weirdness! ::)
Seriously I have no idea, it should work. Permissions problem?
Try putting it in loader.conf instead. That file will definitely be read and acted upon. It may be overwritten with a firmware update later but it will prove the method.

Steve

Gabri.91

Ok, putting them in loader.conf from sysctl the settings were loaded correctly:

hw.pci.enable_msix: 0
hw.pci.enable_msi: 0

I'll let you know if it solves the problem..

Gabri.91

With this settings never crashes and it's perfect! I suggest them before change driver or trash your firewall.. :)

stephenw10

Good to know. Thanks for reporting back.
Disabling MSI like that will presumably increase the CPU interrupt load. Have you noticed any increased load?

Steve

Gabri.91

I don't know because it's on a Pentium M @ 1,7Ghz and it will be never heavy load by a normal ADSL\Hyperlan connection.
I'll let you now in the next weeks\month when I'll add another NIC for DMZ and CPU will be more loaded..

stephenw10

It would be interesting to see if you can achieve the same thing using instead:

hw.msk.msi_disable=1

This would disable MSI only for the msk NIC rather than all PCI devices. A cleaner solution.

Steve

Gabri.91

I prefer to don't touch a things that works good.. ;)
If it helps I never see a delay or slowing down in ping, speedtest, navigation etc after modify the value..