Another Stab at VLANs
-
Despite my most sincere efforts, I can not obtain functionality of VLANs on pfsense 1.2.3.
I have pfsense configured as follows:
http://i427.photobucket.com/albums/pp360/xtropx/Interfaces-1.png
http://i427.photobucket.com/albums/pp360/xtropx/INT_STATUS.png
http://i427.photobucket.com/albums/pp360/xtropx/OPT1.png
http://i427.photobucket.com/albums/pp360/xtropx/OPT2.pngSwitch:
Fast Ethernet 0/1 has been configured as a trunk and has been connected to bge0.
I was hoping that when I plugged my laptop into switchport 2 I would get an address in the 192.168.10.2-192.168.10.254 range, and if plugged into switchport 3 I would get an address in the 192.168.20.2-192.168.20.254 range.
Not working. Any ideas?
-
You're missing trunk port in that switch. that port should be connected to pfsense.
-
also might want to change the 'PVID' on client ports … otherwise your untagged packets from clients will go to the default VLAN1
-
Edit: Success. I had to add switchport trunk allowed vlan add x where x is the vlan id. I wasn't putting "add" in there. Then things worked perfectly. Plugged in to fa0/2 I get 192.168.10.x and fa0/2 I get 192.168.20.x. Solved!