Error 64 Host Down
-
Are you still running squid proxy? Try disabling it.
Steve
-
ya i chk it disabling the proxy server then its shows "The server at apparelntextile.com is taking too long to respond."
-
You may have to reset the firewall states so that traffic is not sent via squid.
Diagnostics: States: Reset states:Steve
-
If i reset it then all settings will remove from firewall rules and port forwarding ??
-
No.
This will just reset states, no configuration changes will occur… -
ok now i try it stop my squid server service reset firewall rules but i have same problem. But now i can browse www.rediff.com not the www.apparelntextile.com. Is any thing that i can bypass the the pfsense all rules for the particular web sites for ex. www.apparelntextile.com
-
If you find out what is causing the problem you can put rules in place to avoid it. You can exclude specific sites from being cached or use a single wan for example. Since you disabled both these things it must be something else. :-\
Steve
-
lots of thanks Steve and maverick ; I will last try on weekends that reinstalling pfsense using single wan without squid server and then try it. If its works then i will go with pfsense or i will remains with my old one ipcop. :(
Thanks again
-
Take it one step at a time.
Start with the most basic install you can, one WAN one LAN no proxy. Check everything is working.
Add features one at a time testing in between each addition.Steve
-
ok thanks if it's success i will post.
-
i chk in Diagnostics: Tables then i see that
112.0.0.0/5
175.100.137.104
192.168.2.0/24
but the 112.0.0.0/5 is not belongs from any network so is this can affect the firewall to opening the some sites?
-
Hmm. Negate_networks should contain static routes, vpns and directly connected networks.
Have you added this subnet anywhere?112.0.0.0/5 certainly contains the address of www.apparelntextile.com.
Try removing it and resetting the firewall states. I have no idea how it got there (pushed to you from your ISP?).Steve
-
ya i done it :D i change the subnet mask of wan interface and now it works fine all sites are opening and the speed of browsing also increased.
Thanks SteveHemant
-
I don't know if I actually helped much. ::)
For future reference what did you change the subnet mask from/to?
Steve
-
Its 112.0.0.0/5 to ..*.0/29 actually its my mistake that the subnet mask i put was wrong ;)
I don't know how its happened but now the problem is solved.Hemant
