Small problem with interface status in webgui
-
status–> interfaces -->In/out packets , In/out packets (pass) , In/out packets (block) -all counters are on 0
[2.0.1-RELEASE][admin@pfSense.localdomain]/root(1): netstat -I fxp0
Name Mtu Network Address Ipkts Ierrs Idrop Opkts Oerrs Coll
fxp0 1500 <link#1>00:07:e9:12:80:fe 1646 0 0 1900 0 0
fxp0 1500 fe80:1::207:e fe80:1::207:e9ff: 0 - - 2 - -
fxp0 1500 192.168.0.0 192.168.0.10 1030 - - 1860 - -Also , if i change the mac adress to a vlan-interface to anything else than the nic card to wich i asigned the vlan interface it stops responding to icmp , even if i clear arp on all the path , devices and reboot the firewall .
I put back the initial mac or just leave blank when i configure the vlan interface and it takes the mac from the nic card and it works.</link#1> -
2.0.1-RELEASE (amd64)
RRD Graphs are empty too.
-
Nobody ? no ideea wwhy the rrd Graphs are not working?