Oct 14th snapshot IPv6 is gone
-
I upgraded from the October 11th snapshot to the snapshot of the 14th of the nano-bsd version. I have native dual stack connectivity with my ISP. When I upgraded, all ipv6 connectivity was gone. I noticed from redmine that a change was made to use the ISC client for ipv6. I suppose this is related. I didn't see anything in the logs that would indicate what happened. There isn't anything too fancy with my setup. Just some firewall rules and a couple of OpenVPN servers. I'll post again if a future snapshot brings ipv6 back.
-
Turns out the new dhcp6 client binary was not included in the copy list.
Need to check if it's included now.
-
Upgraded to Oct. 19 snapshot. The pfsense router itself seems to get a WAN and LAN ipv6 address but doesn't seem to give them out to clients. I didn't see any RA packets when I did a quick packet capture. So no ipv6 connectivity for clients.
Also, during bootup, something gets killed. The RRD graphs are never mentioned during bootup. I suspect the configuring of the firewall is having issues. When I used the Oct. 18th snapshot, the pfsense gui warned me about a syntax error for the Default allow LAN IPv6 to any rule.
-
Kind of the same issue , i get dual stack from the isp via pppoe +dhcp6 , i get ipv6 on the wan but nothing on the lan , or clients behind pfsense , i've tryied all the configuratons on the interfaces from the gui , also the radvd.conf seems to be blank:
[2.1-BETA0][admin@pfsense.localdomain]/usr/local/sbin(64): cat /var/etc/radvd.conf
Automatically Generated, do not edit
[2.1-BETA0][admin@pfsense.localdomain]/usr/local/sbin(66): ping6 ipv6test.com
PING6(56=40+8+8 bytes) 2a02:2f02:3025:f002::50d:8261 –> 2a00:1450:400d:804::1010
16 bytes from 2a00:1450:400d:804::1010, icmp_seq=0 hlim=55 time=32.935 ms
16 bytes from 2a00:1450:400d:804::1010, icmp_seq=1 hlim=55 time=32.596 ms
16 bytes from 2a00:1450:400d:804::1010, icmp_seq=2 hlim=55 time=32.726 ms
16 bytes from 2a00:1450:400d:804::1010, icmp_seq=3 hlim=55 time=32.045 msPS: running on 2.1-BETA0 (i386) built on Mon Oct 22 13:51:01 EDT 2012
-
just checked /var/log/routing.log:
Oct 19 11:12:18 pfsense radvd[63803]: version 1.8.5 started
Oct 19 11:12:18 pfsense radvd[63803]: can't open /usr/local/etc/radvd.conf: No such file or directory
Oct 19 11:12:18 pfsense radvd[63803]: Exiting, permissions on conf_file invalid.
Oct 23 13:00:58 pfsense radvd[32884]: version 1.8.5 started
Oct 23 13:00:58 pfsense radvd[32884]: can't open /usr/local/etc/radvd.conf: No such file or directory
Oct 23 13:00:58 pfsense radvd[32884]: Exiting, permissions on conf_file invalid.
Oct 23 13:06:47 pfsense radvd[42472]: version 1.8.5 started
Oct 23 13:06:47 pfsense radvd[42472]: can't open /usr/local/etc/radvd.conf: No such file or directory
Oct 23 13:06:47 pfsense radvd[42472]: Exiting, permissions on conf_file invalid.