Nat into vpn ipsec

[mic912]

Hello,

I need to activate a  ipsec vpn on a pfense 1.2.x.

The client's network is 192.168.0.0/24 and they need to connect to remote a.b.c.1 and a.b.c.2.

Client's packet 192.168.0.x must be natted to 10.x.y.1 if i go to a.b.c.1 and 10.x.y.2. if i go to for a.b.c.2.

a.b.c.1 and a.b.c.2 are required from remote company because they won't 192.168.0.0/24

PfSense 1.2.x is able to source nat packets before sending them into the tunnel vpn?

Thank you

thanks in advance

[cmb]

not possible with any version at this time, but may end up in 2.1. With all current versions, NAT has to happen on a separate system from IPsec.

[mic912]

ok, i will try with 2.1

Thank you