Pfsense + netgear gs748t switch vlan
-
Hi ..im having some problem here..hope someone could shed some light..
i couldnt get dhcp from pfsense for my vlans
here is my setup
pfsense
em0 - Lan
re0 - Wan
em1 - Vlanoffice
em1 - vlanguestVlanoffice - vlan id 10
vlanguest - vlan id 20dhcp is on for both vlan
firewall rules allow for both vlan
nat for both vlanswitch
port 1 - pfsense in
port 2/47 - unused
port 48 - wireless apvlan id 10 - port 1 tagged , port 48 untagged..
vlan id 20 - port 1 tagged , port 48 untagged
default vlan - port 48 untaggedwireless ap
ssid guest - vlan 20
ssid office - vlan 10got my notebook connect to either 1 ssid , i get limited connection…
-
Since you have multiple VLANs from your AP: i expect them to be tagged.
In this case you would need to set the port 48 to tagged for both VLANs.As a test: connect the AP directly to the pfSense (since you only seem to have one cable).
-
thx GruensFroeschli .. i will give it a try when im back to work.. =)
-
Hi just wanna reply my solution. The dhcp is working now
MY current setup is
vlan id 1 - port 1 Tagged , 2-48 untagged
vlan id guest - port 1 Tagged , port 48 TaggedWireless ap :
SSID guest - vlan id guest
SSID office - vlan id 1And everything is working now…
-
I wouldn't never use the vlan id 1 for anything.
Since it's internally in the switch used for every frame per default it can really fast lead to a setup which doesn't work the way you want. -
u suggest that i create a new vlan for office network rather than using vlan 1 ?
-
yes. most people don't use vlan1 for any client connected systems
i personally have a couple of sites where i use vlan1 for all management interfaces.
these have the switch management interfaces and esx console interfaces etc etc etc