NEW Package: freeRADIUS 2.x

red2006

hello Nachtfalke,

and thank you very much for your patience…

i change my port on my captive portal config to 1812

but still same error appears on radiusd -X on console

rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius@192.168.1.7:3306/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql_mysql: Couldn't connect socket to MySQL server radius@192.168.1.7:radius
rlm_sql_mysql: Mysql error 'Can't connect to MySQL server on '192.168.1.7' (60)'
rlm_sql (sql): Failed to connect DB handle #0
rlm_sql (sql): starting 1
rlm_sql (sql): starting 2
rlm_sql (sql): starting 3
rlm_sql (sql): starting 4
rlm_sql (sql): Failed to connect to any SQL server.
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Ignoring unconnected handle 4..
rlm_sql (sql): Ignoring unconnected handle 3..
rlm_sql (sql): Ignoring unconnected handle 2..
rlm_sql (sql): Ignoring unconnected handle 1..
rlm_sql (sql): Ignoring unconnected handle 0..
rlm_sql (sql): There are no DB handles to use! skipped 5, tried to connect 0
Failed to load clients from SQL.
rlm_sql (sql): Closing sqlsocket 4
rlm_sql (sql): Closing sqlsocket 3
rlm_sql (sql): Closing sqlsocket 2
rlm_sql (sql): Closing sqlsocket 1
rlm_sql (sql): Closing sqlsocket 0
/usr/local/etc/raddb/sql.conf[2]: Instantiation failed for module "sql"
/usr/local/etc/raddb/sites-enabled/default[185]: Failed to load module "sql".
/usr/local/etc/raddb/sites-enabled/default[185]: Failed to parse "sql" entry.
/usr/local/etc/raddb/sites-enabled/default[69]: Errors parsing authorize section.

i attached my

nas/clients configuration here

and my interfaces configuration.

thank you very much for your patience Nachtfalke.

-red

nas.jpg_thumb

interfaces.jpg_thumb

DestekTeknik

Dear Fellas,

I've terribly noticed that, on my system, when accounting update mode from CP is selected as Start/Stop "Accounting", FreeRadius is counting triple times the actual value from time to time.

I mean I tested it with a 20 mi Forever account, and it killed the user at exactly 20 min later. But after that, the clients I've created, ended up so quickly, so I do a radtest check simultaniously with a client, and saw that, every 60 seconds, around 180 seconds are counted.

The only difference is the deadline date that I've given to the other accounts. They are also selected as Forever.

Any ideas?

DestekTeknik

One more question,

Which WebGUI are you using to manage freeRadius on a MySQL backend?

Nachtfalke

@red2006

Interfaces looks ok.

NAS/Clients:
You do not need to add the mysql server as a client. A client is only a sqitch, or an access point or the CP.
So it is not "mistake" to add the mysql server but it has no benefit :-)

I am no mysql expert but you should check the password of the mysql database and the user which has access to the database. the username and password must be entered on the freeradius -> SQL GUI.
Make sure that you chose the correct username and password.

There is nothing more I could tell you - I didn't connect freeradius to any sql database. Perhaps double check that the database name and tables are correct or perhaps contact user zlyzwy by PM.

@DestekTeknik
pfsense 2.0.1 has some problems with accounting. can you try with 2.0.2 and/or 2.1 ? There were some bugfixes on CP and accounting.
But if I remember correct there are some other threads on the forum which are telling a similar problem that yours.

You tested time quota, right ?
This should be implemented well in freeradius because it comes directly from the freeradius developers. So the problem probably lies in the CP code.
the traffic quota is just using some shell scripts which do the accounting. So it could be possible that there is something wrong.

Did you check the pfsense doc ?
http://doc.pfsense.org/index.php/FreeRADIUS_2.x_package

DestekTeknik

Yes I've tested the time quota, and I don't need the traffic quota.

I haven't tested on 2.1 cause I need a stable platform for this at the moment, and don't know how to get to 2.0.2 either…

I've read the documentation, and selected start/stop accounting setting based on the documentation, but at the moment, it is selected as interim update-not working as it should-but at least, updates the correct time when the user logouts. So no automated system to kick the user when the time is finished, just the hard logout time setting from the CP.

Do you prefer any WebGui's for the mysql management of freeradius? I'm looking into dialup-admin, but I believe they are both pointing to different table schema's so I have no idea if they work together.

Nachtfalke

I do not use any mysql database so do not use any GUI for that ;)
Other people are talking about "daloradius" but this seems to be more a complete product than just only a GUI.

DestekTeknik

daloradius-I am standing away from it at the moment, cause it is giving me headaches for the last year :)

anyway I'm dealing with dialup admin at the moment, if any of us is using it, a how-to guide will be appreciated :)

DestekTeknik

Hello folks,

I desperately need of a permanent file change in the default site file. I'm currently adding the only line I need via the edit file option of pfSense WebGUI, but the file reverts back to original after reboot. The line I add is "noresetcounter" under sql part.

Strange thing is, I also ad an attribute about Max-All-Session to the dictionary file, but that file stays the same after every reboot.

Does anyone have any ideas about this situation?

Nachtfalke

@DestekTeknik:

Hello folks,

I desperately need of a permanent file change in the default site file. I'm currently adding the only line I need via the edit file option of pfSense WebGUI, but the file reverts back to original after reboot. The line I add is "noresetcounter" under sql part.

Strange thing is, I also ad an attribute about Max-All-Session to the dictionary file, but that file stays the same after every reboot.

Does anyone have any ideas about this situation?

You need to modify the /usr/local/pkg/freeradius.inc file.

The dictionary file will be modified in this function:
freeradius_dictionary_resync()

Not sure where you did the sql changes.

DestekTeknik

@Nachtfalke:

@DestekTeknik:

Hello folks,

I desperately need of a permanent file change in the default site file. I'm currently adding the only line I need via the edit file option of pfSense WebGUI, but the file reverts back to original after reboot. The line I add is "noresetcounter" under sql part.

Strange thing is, I also ad an attribute about Max-All-Session to the dictionary file, but that file stays the same after every reboot.

Does anyone have any ideas about this situation?

You need to modify the /usr/local/pkg/freeradius.inc file.

The dictionary file will be modified in this function:
freeradius_dictionary_resync()

Not sure where you did the sql changes.

I've no problem with the changes that I've made to the dictionary file. They stay the same after the reboot.

I'm just adding a line saying "noresetcounter" to the /raddb/sites-available/default file, and this line is gone after the reboot.
I don't know how to make a change via the freeradius.inc file.
I've tried using Filer package, but because it starts after freeradius starts, It changes the file while freeradius is running, and this makes no difference for the first run. I have to restart the service manually to make it happen.

Can you suggest a solution to this?

the lines of default file look like after changing:

#  See "Authorization Queries" in sql.conf

         redundant {
			sql
			### sql2 DISABLED ###
	}
        noresetcounter ## I just add this line ##
#

Nachtfalke

Open the file /usr/local/pkg/freeradius.inc with an editor like vi.
Best way to connect to your pfsense using SSH and use the console. Type:


vi /usr/local/pkg/freeradius.inc

scroll down to the line 1232
There starts the function "freeradius_serverdefault_resync ()"
This function creates the ../sites-enabled/default file.
Starting from line 1396 to 2066 this is what is the part you need to change.

red2006

@red2006

Interfaces looks ok.

NAS/Clients:
You do not need to add the mysql server as a client. A client is only a sqitch, or an access point or the CP.
So it is not "mistake" to add the mysql server but it has no benefit :-)

I am no mysql expert but you should check the password of the mysql database and the user which has access to the database. the username and password must be entered on the freeradius -> SQL GUI.
Make sure that you chose the correct username and password.

There is nothing more I could tell you - I didn't connect freeradius to any sql database. Perhaps double check that the database name and tables are correct or perhaps contact user zlyzwy by PM.

Hi Nachtfalke,

never rily got a chance to hear from zlyzwy through PM

but, ive finally got a way to connect to my mysql dbase using sql feature of freeradius
everything in my configuration was correct except for one thing.

the "read clients from database" selection must be set to NO it is yes by default

and it connected succesfully with my xampp server mysql database.

but is till have a problem.

ive added users on my radcheck table on my mysql dbase.

but i always get the rejection on radius on user authentication.
what is missing on my data?
and am i correct that the radcheck table is the users table for user authentication.

Thank you very much Nachtfalke.

Good Day to everybody.

Nachtfalke

radcheck seems to be the correct place for username and password.

radiusd -X will tell you what is missng or wrong. Run freeradius in this mode and read all the output. On some line you will see that freeradius will check for a username and then you can see what is missing, wrong or what happened.

myke

Hello everyone,

I have 2 questions :
I want to use Freeradius 2 for certificates for TLS.
But when i export client P.12 on my mobility controller, it tells me the password isn't valid.

There is a bug or what i'm doing wrong?

So i decided to convert my certificat with openssl and it's okay when i'm exporting but i've got a error radius when i'm logging:
"Error: TLS Alert read:fatal:unknown CA
Thu Nov 22 17:57:49 2012 : Error: TLS_accept: failed in SSLv3 read client certificate A
Thu Nov 22 17:57:49 2012 : Error: rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca"

This means there is a problem with the certificat but i can't find the solution…

Thanks for the help.
Best regards.

Nachtfalke

In general you should create your CA ander server cert on pfsene Cert Manager.
then select these two certificates on freeradius -> EAP and save.

Client certificates can be build on pfsense Cert Manager and export the .p12 file. This should work and the .p12 file should be without any password. can you try with an empty password ? But this is more a "pfsense" problem than a freeradius problem.

I am not sure but if I remember correct there was another thread here in the forum which is about the .p12 file and a password. Perhaps the search function can help you.

myke

@Nachtfalke:

In general you should create your CA ander server cert on pfsene Cert Manager.
then select these two certificates on freeradius -> EAP and save.

Client certificates can be build on pfsense Cert Manager and export the .p12 file. This should work and the .p12 file should be without any password. can you try with an empty password ? But this is more a "pfsense" problem than a freeradius problem.

I am not sure but if I remember correct there was another thread here in the forum which is about the .p12 file and a password. Perhaps the search function can help you.

Thanks for the answer.

My Certificate Authority and certificate was created in pfsense Cert manager. I just created .pfx with openssl.
In first time i try with an empty password and second time with a password "pfsense" but exactly the same result.

I use pfsense 2.0.1 AMD release.

Myke.

red2006

@Nachtfalke

Hello…

ive encountered 2 problems with my pfsense+captiveportal+freeradius
im currently testing the configuration before i test my sql component.

idont know if youve already encountered this and ive seen some posts here on the forum but never rily got the chance to have the solution.

first: MAX-DAILY-USAGE time...

currently i have 50 users on my freeradius2 users tab
with different max time on daily basis
but the problem is...
if one of the users got the maximum daily usage time...
all of the users also maxed out of their daily time even if they've just going to log in for the first time of the day.

i understand that the other threads have problem on max-daily-usage time on not resetting the counter/session to zero(0) so that the next day they'll have a fresh acct with a fresh daily time usage.

so how can i reset the session/counter of the max-daily-usage so that i dont have to create another acct for all of users all over again.

and how would i resolve the all users maxed out of their time when one(1) user consumed all of his/her time in a day.

Second(2) - WebGUI slow process

i am experiencing a slow process on the webGUI of pfsense...
what could be the problem?
i didnt change anything on my configuration nor installed additional packages.
but it takes at leat 3 mins to go to another page on my webGUI of pfsense.

ive already restarted pfsense.
check all my network connectivity and work all fine.

but still have the super slow process on the webGUI even if just clikcing or navigating to the pages of the webGUI...

hope you can help me with this Nachtfalke.

Tahnk you very very much.

Nachtfalke

@red2006

the counter module in /usr/local/ect/raddb/mnodules is a predifined module within the freeradius2 package. it works how it comes from freeradius.org. The freeradius2 package does not change anything on this module.

here is a description:

http://linux.die.net/man/5/rlm_counter

The database which contains the daily-usage can be found here:
/var/log/radacct/timecounter/daily/db.daily

Depending on what you set in the users setting - the counter will be resetted.

The problem why users gets disconnected if one user has rached its limit is probably because of the fact that CP is sending wrong values. Which values are wrong and why there are wrong - I don't know. I am really really sorry but I do not know what CP is doing wrong. If you know what is wrong and you can explain what is happening, how ist can be reproduced in a testing environment and perhaps do some packet-captures you should open a ticket on redmine so that someone can fix this bug on CP.

Further try checing this with different pfsense versions - 2.0.0, 2.0.1, 2.0.2, 2.1. Perhaps only some versions are affected and not all.

Your second question:
Is the slowness of the GUI dependend if you have freeradius2 package installed or not ?
You can check with the command "top" on console which process is using much memory/CPU time when the GUI is slow.

I hope this will help you :)

red2006

@Nachtfalke

ive managed to restore my pfsense configuration from the moment ive configured the CP+freeradius
and its working fine now(slow process no more)

i dont know what rily happened.

and i reuploaded all of my users again.

i now have a very minimal config on my CP and free radius just for the bug testing again of pfsense+CP+freeRadius

i limited the bandwidth per user on CP, so all of the users added on freeradius would have same bandwidth restrictions
and session limit is set on freeradius and everybody on the users tab have the same session limit.

i tested to have a different bandwidth allocation on freeradius acct entry but the users authentication replied accept-reject. i dont know why this happens but i when i emptied the bandwidth limit on the user entry on free radius, the user authentication succeeded… i dont know what the problem on that.

also all of my users have now an unlimited access on the internet but with a hard time out of 1 hour, i will not set anything first on the user max daily time limit until i got some answers or further testing on the max daily usage per user.

i currently have 160 users on the users tab and i dont think i want to reenter them again if i misconfigured again the user max daily time.

ill try to look for ways on how to reset or clear the cache of users max daily time usage coz on my last testing even if the user maxed out of his time per day, he cannot realy login/reauthenticated the next day or any succeeding days, meaning that CP is not really resetting its time/counter/cache on any basis, even if i reconfigure the user to another max daily time usage. The only solution is to rename the username. Thats the only solution to really have a fresh or counter reset on the users account.

thanks alot Nachtfalke.

hope to have a solution on atleast on the max daily usage of the users soon... thanks alot.

another one.

is this possible?
to have the logs or table of user account login or time usage of users from the moment the account was created.
to have it printed or shown on the webGUI?

thanks.
i need that report for my network monitoring blabla... :-)

thanks again... youve been realy a big help on my part.

Nachtfalke

Hi,

I think the problem is CaptivePortal which isn't doing accounting the correct way. Perhaps you should go the same way using redmine.pfsense.org like I wrote here:
http://forum.pfsense.org/index.php/topic,52324.msg300182.html#new

For getting more information when a user is logged on you can enable logging on freeradius2 GUI –> Settings.
Then you could extend the output when someone with wrong or correct username/password authenticates. Take a look at the following link:
http://doc.pfsense.org/index.php/FreeRADIUS_2.x_package#Syslog:_Expand_the_logging_output_to_your_needs

You could try with:


Remaining time in seconds: %{reply:Session-Timeout}

As far as I know freeradius sends back "Sessio9n-Timeout" as attribute in a reply message. You can fill in other attributes - you just have to find out their name and if the appear in a request or a reply and so on :-)

Good luck and thank you for your help!