Snapshots are back!
-
Since we moved the builds to a blazingly fast new box, I went ahead and enabled nanobsd+vga builds for each snapshot run. enjoy!
-
Is your blazingly fast new build boxes dumping update files to a new location also? Reason I am asking is that I have an IPv6 only firewall that cannot get to update. Some troubleshooting shows that snapshots.pfsense.org is not resolving a AAAA record.
-
Yeah the snapshots site moved to our colo at NYI (the builds are done in yet a different place), the NYI site doens't have IPv6 yet, but will soon.
-
N00b question but still, what windows program should I use to burn the 4g image to my ssd?
-
It's on the wiki, but either physdiskwrite or win32 disk imager.
-
Thanks :)
-
AAAA is back for snapshots.pfsense.org so getting updates over IPv6 will work again.
-
Thanks. That is good news.
-
Wow, it's that I need, thank you!
-
Where should I look for changes in these snapshots? In here ?
-
There and also here: http://redmine.pfsense.org/activity
-
Hello
I am on a clean 2.0.1 (i386) and try to update to 2.1. Enabling development repo, and allowing unsigned images.
When done it says:
The image file is corrupt.
Update cannot continueShould it be possible to upgrade using the GUI? Or is something else needed for first time upgrade to 2.1?
BR. Anders
-
That should be enough.
It's possible your system is downloading a bad or corrupt image somehow (perhaps a proxy or something else in between?)
If it's still giving the same message after a new snapshot run (check back tomorrow), start a fresh thread for the issue.
-
Will do, thanks.
-
are there 64-bit builds? I'm looking for a nanobsd to run from USB but all I see are i386. Possibly I'm missing something.
-
There are separate links for i386 and amd64, but all are under http://snapshots.pfsense.org
e.g. http://snapshots.pfsense.org/FreeBSD_RELENG_8_3/amd64/pfSense_RELENG_2_1/?C=M;O=D
-
There are separate links for i386 and amd64, but all are under http://snapshots.pfsense.org
e.g. http://snapshots.pfsense.org/FreeBSD_RELENG_8_3/amd64/pfSense_RELENG_2_1/?C=M;O=D
Thanks! Hey, look at that. Right there in the body of the OP. Sorry for the momentary illiteracy.
-
Hi jimp,
I am experiencing issues reaching snapshots.pfsense.org from last two days:
Maybe it can be a temporary / network issue?
[luzemario@acer ~]$ tracepath snapshots.pfsense.org
1: 192.168.X.Y 0.129ms pmtu 1500
1: mysite.no-ip.org 2.123ms
1: mysite.no-ip.org 1.982ms
2: ispinternalrouter 11.607ms
3: mygateway.com.br 12.756ms
4: embratel-T0-6-5-0-tacc01.rjoen.embratel.net.br 30.328ms
5: ebt-T0-2-0-0-tcore01.rjo.embratel.net.br 155.039ms asymm 7
6: ebt-Bundle-POS1211-intl01.nyk.embratel.net.br 154.490ms
7: ae59.edge2.NewYork1.Level3.net 158.892ms asymm 15
8: vlan60.csw1.NewYork1.Level3.net 162.673ms asymm 18
9: ae-81-81.ebr1.NewYork1.Level3.net 163.354ms asymm 17
10: ae-2-2.ebr1.Newark1.Level3.net 169.491ms asymm 17
11: ae-1-51.edge2.Newark1.Level3.net 167.495ms asymm 16
12: THE-NEW-YOR.edge2.Newark1.Level3.net 221.790ms asymm 17
13: cs20.cs59.v.jfk.nyinternet.net 165.389ms asymm 18
14: no reply
15: no reply
16: no reply
17: no reply
… -
And I just had a crash…
I sent crash report from my box 2 minutes ago.
Can someone please check it out and let me know what went wrong?Many thanks!
-
Please start new, separate, threads for issues, rather than trying to pile on this old thread.
