PfBlocker

kilthro

check you logs. are you getting reset interfaces? is there any other activity causing this? If you change settings in other areas that can affect the interfaces or monitoring ect it will cause them to reset. I wonder if you are getting alarms on these interfaces.. I never have the widget reset buy just moving around in the webgui.. only if i actually make changes to interfaces, pfblocker, snort, ect..

ccb056

I am receiving an error:

Dashboard page - pfBlocker widget
it is reading '500 - Internal Server Error'

This is also reported here:
http://forum.pfsense.org/index.php?topic=54262.0

running: 2.0.2-RELEASE (amd64)
packages:
OpenVPN tap Bridging Fix
pfBlocker
RRD Summary

ccb056

Upon investigating another error I was experiencing, see here:
http://forum.pfsense.org/index.php/topic,57113.0.html

I switched from Chrome to IE, in IE the 500 error is gone and the dashboard widget works as expected.

Maybe the pfBlocker and Traffic Graph bug are related….. both show errors in Chrome but work in IE

Supermule

I get this error

php: : There were error(s) loading the rules: /tmp/rules.debug:39: cannot define table pfBlockerEmerging_Block_IP: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [39]: table <pfblockeremerging_block_ip>persist file "/var/db/aliastables/pfBlockerEmerging_Block_IP.txt"

I have deleted the file, but it still shows up on the pfblocker widget on the frontpage of PFsense.

It keeps giving me errors of the list is gone, but before I deleted it, it was still there.

Very weird problem…</pfblockeremerging_block_ip>

Supermule

Cannot remove lists from pfblocker widget….

How to do?? They dont go away when deleted from the lists tab in the config GUI.

Supermule

Deleted and reinstalled. Lists are gone.

Supermule

Did a package delete and rebooted….

Jan 4 22:05:27 php: : There were error(s) loading the rules: /tmp/rules.debug:35: cannot define table pfBlockerTopSpammers: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [35]: table <pfblockertopspammers>persist file "/var/db/aliastables/pfBlockerTopSpammers.txt"

Jan 4 22:05:27 php: : New alert found: There were error(s) loading the rules: /tmp/rules.debug:35: cannot define table pfBlockerTopSpammers: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded The line in question reads [35]: table <pfblockertopspammers>persist file "/var/db/aliastables/pfBlockerTopSpammers.txt"

I think it has issues with 2.0.2 release…..</pfblockertopspammers></pfblockertopspammers>

Supermule

Did a manual delete in rules.debug to remove pfblocker aliases.

Now it says this…

Jan 4 22:16:46 php: : There were error(s) loading the rules: /tmp/rules.debug:35: cannot define table pfBlockerTopSpammers: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [35]: table <pfblockertopspammers>persist file "/var/db/aliastables/pfBlockerTopSpammers.txt"

Jan 4 22:16:46 php: : New alert found: There were error(s) loading the rules: /tmp/rules.debug:35: cannot define table pfBlockerTopSpammers: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded The line in question reads [35]: table <pfblockertopspammers>persist file "/var/db/aliastables/pfBlockerTopSpammers.txt"

It just wont go away!</pfblockertopspammers></pfblockertopspammers>

kilthro

Looks like memory allocation errors.

Did you go to system > Advanced > Firewall/Nat tab and increase the Firewall Maximum Table Entries?

I have had to increase mine quite a bit to run all my tables. I currently have mine set to 999999999 and no longer get any memory allocation errors.

Supermule

Its currently set at 200.000 table entries…and 100.000 tables...

kilthro

increase it way up. Thats most likely the problem. Its not going to affect the firewall negatively. You see where mine is set and all runs just fine and I dont get those errors anymore.

Supermule

Whats your maximum tables and table entries??

kilthro

Attached everything on that page. I didnt touch anything else. Left it at default.

states.jpg_thumb

Supermule

Thx!

francisuk22

Love it! :)

LinuxTracker

I have pfBlocker loading a list from the following url:
http://www.dnsbl.manitu.net/download/nixspam-ip.dump.gz

I decompressed the .gz to look at it and found text in the following format:

2013-01-21T20:15+0100 78.39.223.180
2013-01-21T20:15+0100 49.202.135.218
2013-01-21T20:15+0100 213.108.75.31
...

I have 2 systems that handle this list fine.
One other system scrambles the file content - loads nonsense IPs the table - is why I peeked inside the .gz

The thing is, I thought pfBlocker had to have the IP addr/cidrs at the beginning of the line. Looks like I'm wrong.

In what format(s) does pfBlocker need it's IP data?

marcelloc

@LinuxTracker:

In what format(s) does pfBlocker need it's IP data?

It loks for ip addresses using preg_match, if you can edit it to remove ip date, it may help.

LinuxTracker

@marcelloc:

It looks for ip addresses using preg_match, if you can edit it to remove ip date, it may help.

The list loads fine on two systems; now I know why.

The system that scrambles the data has 27 lists loaded.
It's probably just reacting to all the abuse I heap upon it.

As always, thank you for your insight.

Gradius

The real main issue is even on last update 2.1-BETA1 (today), pfblocker still doesn't comes up as ENABLED.

Everytime after update I need to go there and manually enable myself. ::)

marcelloc

@Gradius:

Everytime after update I need to go there and manually enable myself. ::)

Pfblocker uninstall script will always disable the service to avoid aliases/rules issues.

It's a feature, not an issue ;)