OpenVPN interfaces cannot be set as usable gateways

Guest

This has been a issue since at least the August snapshots, and I have upgraded at least 10 times since then, all of them having the same issue. I also have rebuilt the configs as least once. It seems have something to do with the fact that the gateway shows up as "Dynamic", as if PfSense doesn't know ovpn instance is getting an IP address/gateway, and it just relying on what the interface is configured as (none). Also, giving the actual interface an IP address allows the gateway to be set and gateway IP to no longer show up as "Dynamic", even though this obviously won't work since it is the opvn instance that needs to negotiate that.

jimp

Might be the IPv4/IPv6 type detection.

When you first create a rule, that detection hasn't kicked in yet. When you edit an existing rule, it only shows gateways of the type the rule it set to be.

jimp

…that said, I just checked, and on my 2.1 VM, I see my OpenVPN gateway in the drop-down for an IPv4 rule, but not an IPv6 rule.

Guest

Was the OpenVPN instance you tested a server or client? I have both on the pfsense box, and the server instance actually shows up with an actual IP address in the firewall rules (though its not set up as a valid gateway). However, the client instance does not show up in the firewall rules, and shows up as "Dynamic" under "Status: Gateways". It is the client instance that I am trying to make a gateway.

Guest

@jimp:

Might be the IPv4/IPv6 type detection.

When you first create a rule, that detection hasn't kicked in yet. When you edit an existing rule, it only shows gateways of the type the rule it set to be.

All the openVPN instance on my box are IPv4 only. I see under "Status: Interfaces" that the OpenVPN client interface gets a valid IPv4 address, mask, and default gateway. The system gateway that has the client interface is set as IPv4. However, when I create a new rule, it does show up as "interface name - dynamic". Maybe its the "dynamic" part that is not allowing it to be set as a IPv4 gateway? If so, how do I get it to stop showing up as dynamic in all the status pages? See attached images.

![pfSense dynamic gateway 1.PNG](/public/imported_attachments/1/pfSense dynamic gateway 1.PNG)
![pfSense dynamic gateway 1.PNG_thumb](/public/imported_attachments/1/pfSense dynamic gateway 1.PNG_thumb)
![pfSense System-Gateways.PNG](/public/imported_attachments/1/pfSense System-Gateways.PNG)
![pfSense System-Gateways.PNG_thumb](/public/imported_attachments/1/pfSense System-Gateways.PNG_thumb)

jimp

Does that ovpnc interface actually have an IP on it?

What does "ifconfig -a" show?

It works for me on a client and a server, though these are both SSL/TLS with a /30 mask.

ovpn_gw.png_thumb

Guest

The actual interface does not have an IP set (set to "none"). The OpenVPN instance does negotiate an IP address (See attached). The OpenVPN client is configured as a "Peer to Peer (SSL/TLS)" in tunnel mode, so it is a /30 as well. In the openVPN logs I see the gateway as 10.9.1.1. ifconfig -a shows
ovpnc2: flags=8051 <up,pointopoint,running,multicast>metric 0 mtu 1500
options=80000 <linkstate>inet6 fe80::4e02:89ff:fe0a:a548%ovpnc2 prefixlen 64 scopeid 0x13
nd6 options=1 <performnud>Opened by PID 88995

Something I just noticed, under "Diagnostics: Routing tables", I do not see any entries for the ovpnc2 interface.

![pfSense OpenVPN Status.PNG](/public/imported_attachments/1/pfSense OpenVPN Status.PNG)
![pfSense OpenVPN Status.PNG_thumb](/public/imported_attachments/1/pfSense OpenVPN Status.PNG_thumb)</performnud></linkstate></up,pointopoint,running,multicast>

jimp

edit/save that VPN and let it reconnect, see if the interface gets an IP then.

There is no IP in ifconfig, so the function the gateway uses to determine the interface IP doesn't find it.

If you edit/save/apply the interface (even if it's set to none) it will stomp on the IP settings and the VPN needs a kick.

xbipin

same issue for me, when i create a fresh rule, i see the openvpn gateway in list, when i try to edit it doesnt show, this is since long, i also mentioned my findings in redmine but its still same

CropperCapture[1].jpg
CropperCapture[1].jpg_thumb
CropperCapture[3].jpg
CropperCapture[3].jpg_thumb

phil.davis

I just put a fix in: https://github.com/bsdperimeter/pfsense/commit/d9ce908f28c849b5cfffea5f1512bdd486c27d79
It makes the OpenVPN interface gateways that match the IP protocol of the rule, appear in the dropdown when the rule is being edited.
In the next snapshot (or do GitSync or whatever to get this little change), please try it out.
It is only a GUI code change, doesn't effect whether the subsequent routing actually gets implemented correctly. If there are other issues with the policy-based routing rule actually being actioned correctly under-the-hood, then let us know about that also. The OP had mentioned:

and nothing is actually routed out that gateway

Which makes me think there might also be an issue with the under-the-hood implementation of the rule?

xbipin

for me, when i create the rule and add the openvpn gateway and save, packets do route through it, no issues there, only thing was while editing the gateway disappeared

xbipin

@phil.davis:

I just put a fix in: https://github.com/bsdperimeter/pfsense/commit/d9ce908f28c849b5cfffea5f1512bdd486c27d79
It makes the OpenVPN interface gateways that match the IP protocol of the rule, appear in the dropdown when the rule is being edited.
In the next snapshot (or do GitSync or whatever to get this little change), please try it out.
It is only a GUI code change, doesn't effect whether the subsequent routing actually gets implemented correctly. If there are other issues with the policy-based routing rule actually being actioned correctly under-the-hood, then let us know about that also. The OP had mentioned:

and nothing is actually routed out that gateway

Which makes me think there might also be an issue with the under-the-hood implementation of the rule?

i tried the patch manually and it does now show the openvpn gateway in list while editing and routes also fine

Guest

@phil.davis:

The OP had mentioned:

and nothing is actually routed out that gateway

Which makes me think there might also be an issue with the under-the-hood implementation of the rule?

What I meant was the OpenVPN server instance only serves client PCs, and doesn't connect to any networks. It works as it is supposed to. The OpenVPN client instance is the one that doesn't show up in the firewall rules. I don't know if there are any routing issues since I haven't been able to use it as a gateway yet :) . I will try the latest snapshot tomorrow and report if it works or not.

Guest

I upgraded to the snapshot Built On: Wed Jan 9 07:10:11 EST 2013. The gateway now shows up in the firewall rules, though it still shows up as "Dynamic".

The interface does show up in the routing table, and ifconfig -a shows
ovpnc2: flags=8051 <up,pointopoint,running,multicast>metric 0 mtu 1500
options=80000 <linkstate>inet6 fe80::4e02:89ff:fe0a:a548%ovpnc2 prefixlen 64 scopeid 0x13
inet 10.9.1.90 –> 10.9.1.89 netmask 0xffffffff
nd6 options=3 <performnud,accept_rtadv>Opened by PID 9794</performnud,accept_rtadv></linkstate></up,pointopoint,running,multicast>

However, I cannot route anything through that gateway. I can ping through it just fine using the pfsense ping tool, but none of the PCs using it as a gateway can ping outside the network. I am not seeing anything unusual in the logs.

fragged

Outbound NAT rule missing?

Guest

Yep, that was it. Its all working now. Thank-you all for for your help, this had been a big issue for me for a long time!