Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Mac spoof on wan - pppoe doesnt work

    Scheduled Pinned Locked Moved 2.1 Snapshot Feedback and Problems - RETIRED
    21 Posts 5 Posters 7.8k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jimpJ
      jimp Rebel Alliance Developer Netgate
      last edited by

      No they don't conflict because technically they are different interfaces, one is vr1 and the other is pppoe0

      Sort of like how you can use both the vlan parent and a vlan subinterface at the same time.

      And since you have the physical interface set to an IP of none it wouldn't hurt anything anyhow.

      Remember: Upvote with the ๐Ÿ‘ button for any user/post you find to be helpful, informative, or deserving of recognition!

      Need help fast? Netgate Global Support!

      Do not Chat/PM for help!

      1 Reply Last reply Reply Quote 0
      • X
        xbipin
        last edited by

        ill test it and report back.

        if this is the way to spoof then u should probably remove the mac spoof box when u select pppoe type when u create a new interface coz it can be misleading

        1 Reply Last reply Reply Quote 0
        • jimpJ
          jimp Rebel Alliance Developer Netgate
          last edited by

          That may be a good idea. I'm not sure that box serves any purpose for PPPoE (or PPTP or L2TP or PPPโ€ฆ)

          Remember: Upvote with the ๐Ÿ‘ button for any user/post you find to be helpful, informative, or deserving of recognition!

          Need help fast? Netgate Global Support!

          Do not Chat/PM for help!

          1 Reply Last reply Reply Quote 0
          • X
            xbipin
            last edited by

            once i create a new interface opt1, do i need to goto ppp tab edit pppoe and assign it to vr1 or to opt1?

            1 Reply Last reply Reply Quote 0
            • X
              xbipin
              last edited by

              when i tried with vr1

              actually there is multi wan set so vr0 is lan vr1 is wan1 and vr2 is wan2 and its wan2 i need to spoof and the new itnerface ic reated was opt3 with spoofed mac

              when the ppp tab listed pppoe linked to vr2 i got the below log and didnt work, not to mention my second device with pppoe reconnect issue

              Sep 25 18:40:22 	syslogd: kernel boot file is /boot/kernel/kernel
              Sep 25 22:24:59 	check_reload_status: Syncing firewall
              Sep 25 22:25:41 	php: /interfaces_assign.php: Calling interface down for interface opt3, destroy is
              Sep 25 22:25:41 	php: /interfaces_assign.php: Deny router advertisements for interface opt3
              Sep 25 22:25:46 	check_reload_status: updating dyndns opt3
              Sep 25 22:25:53 	php: /interfaces_assign.php: Creating rrd update script
              Sep 25 22:25:53 	check_reload_status: Syncing firewall
              Sep 25 22:26:21 	check_reload_status: Syncing firewall
              Sep 25 22:26:27 	php: /interfaces.php: Calling interface down for interface opt3, destroy is
              Sep 25 22:26:27 	php: /interfaces.php: Deny router advertisements for interface opt3
              Sep 25 22:26:27 	kernel: vr2: link state changed to DOWN
              Sep 25 22:26:27 	check_reload_status: Linkup starting vr2
              Sep 25 22:26:30 	check_reload_status: Linkup starting vr2
              Sep 25 22:26:30 	kernel: vr2: link state changed to UP
              Sep 25 22:26:32 	check_reload_status: updating dyndns opt3
              Sep 25 22:26:34 	php: /interfaces.php: Removing static route for monitor 203.187.192.33 and adding a new route through 203.187.196.1
              Sep 25 22:26:35 	php: : Hotplug event detected for opt3 but ignoring since interface is configured with static IP ()
              Sep 25 22:26:35 	php: /interfaces.php: Creating rrd update script
              Sep 25 22:26:35 	check_reload_status: Reloading filter
              Sep 25 22:26:37 	php: : Hotplug event detected for opt3 but ignoring since interface is configured with static IP ()
              Sep 25 22:26:37 	check_reload_status: rc.newwanip starting vr2
              Sep 25 22:26:45 	php: : rc.newwanip: Informational is starting vr2.
              Sep 25 22:26:45 	php: : rc.newwanip: on (IP address: ) (interface: opt3) (real interface: vr2).
              Sep 25 22:26:45 	php: : rc.newwanip: Failed to update opt3 IP, restarting...
              Sep 25 22:26:45 	check_reload_status: Configuring interface opt3
              Sep 25 22:26:51 	php: /status_interfaces.php: Calling interface down for interface opt2, destroy is
              Sep 25 22:26:51 	check_reload_status: Configuring interface opt2
              Sep 25 22:26:55 	check_reload_status: Updating all dyndns
              Sep 25 22:26:55 	check_reload_status: Restarting ipsec tunnels
              Sep 25 22:26:55 	check_reload_status: Restarting OpenVPN tunnels/interfaces
              Sep 25 22:26:55 	check_reload_status: Reloading filter
              Sep 25 22:26:56 	php: : Could not find IPv4 gateway for interface (opt2).
              Sep 25 22:26:59 	php: : Deny router advertisements for interface opt2
              Sep 25 22:27:00 	check_reload_status: Rewriting resolv.conf
              Sep 25 22:27:00 	php: : Starting 3gstats.php on device '' for interface 'opt2'
              Sep 25 22:27:01 	php: : Deny router advertisements for interface opt3
              Sep 25 22:27:15 	php: : Could not find IPv4 gateway for interface (opt2).
              Sep 25 22:27:43 	syslogd: exiting on signal 15
              Sep 25 22:27:43 	syslogd: kernel boot file is /boot/kernel/kernel
              Sep 25 22:27:49 	php: /status_interfaces.php: Deny router advertisements for interface opt2
              Sep 25 22:27:49 	php: /status_interfaces.php: Starting 3gstats.php on device '' for interface 'opt2'
              
              1 Reply Last reply Reply Quote 0
              • X
                xbipin
                last edited by

                can some1 guide me on how to trace what mac id is being sent to isp for pppoe connections as recently there was a patch for the issue but i have no clue to how to trace if the applied mac id is being sent also or no

                1 Reply Last reply Reply Quote 0
                • jimpJ
                  jimp Rebel Alliance Developer Netgate
                  last edited by

                  You'd probably have to do a packet capture on the physical interface (e.g. vr2) to see that.

                  From the shell, something like this may work:

                  tcpdump -vvvnei vr2

                  Remember: Upvote with the ๐Ÿ‘ button for any user/post you find to be helpful, informative, or deserving of recognition!

                  Need help fast? Netgate Global Support!

                  Do not Chat/PM for help!

                  1 Reply Last reply Reply Quote 0
                  • X
                    xbipin
                    last edited by

                    i tried it and as soon as i go under interfaces->wan and feed in a new mac id and apply the pppoe link under ppp under assign looses its itnerface and i get the below in system log so then i reassign the vr1 interface which is for my wan and pppoe connects but still with the actual mac id, not the spoofed one so i guess it still doesnt work

                    Jan 12 12:42:27 	php: : Could not find IPv4 gateway for interface (wan).
                    Jan 12 12:42:27 	php: : Could not find IPv4 gateway for interface (wan).
                    Jan 12 12:42:27 	php: : Could not find IPv4 gateway for interface (wan).
                    Jan 12 12:42:27 	php: : Could not find IPv4 gateway for interface (wan).
                    
                    1 Reply Last reply Reply Quote 0
                    • W
                      wallabybob
                      last edited by

                      Did you disable and enable the PPP link around changing the MAC address?

                      Did you restart the box after changing the MAC address?

                      1 Reply Last reply Reply Quote 0
                      • X
                        xbipin
                        last edited by

                        i restarted now and it seems its using the applied mac id now so i guess it works now so 2 things need to be done, when u apply the new mac id, the itnerface from the ppp link gets lost so it needs to be reaggined so probably that needs a patch so u dont have to go around doing it manually and also put up a note saying to restart the box when mac spoof is used

                        1 Reply Last reply Reply Quote 0
                        • rbgargaR
                          rbgarga Developer Netgate Administrator
                          last edited by

                          Following commit should fix the issue, please let me know if it works.

                          https://github.com/bsdperimeter/pfsense/commit/254ebf8b0fb9a8042d154ab2206d7c4f3f16b487

                          Renato Botelho

                          1 Reply Last reply Reply Quote 0
                          • X
                            xbipin
                            last edited by

                            ill test it in some while now and report back

                            1 Reply Last reply Reply Quote 0
                            • rbgargaR
                              rbgarga Developer Netgate Administrator
                              last edited by

                              There is a more recent commit with a better solution. Please consider testing this one.

                              https://github.com/bsdperimeter/pfsense/commit/84086442a2fa40b0fba12cf00a935144de3c5e71

                              Renato Botelho

                              1 Reply Last reply Reply Quote 0
                              • X
                                xbipin
                                last edited by

                                tried, it works well but some issues. after i enter a spoofed mac id, it gets implemented and pppoe reconnects and uses the new mac id and everything well but once i goto that spoofed mac id field and remove it and apply again, pppoe reconnects but under ppp tab etc it still keeps showing the spoofed mac id, not the original one, now i tried to do a trace from console to see what amc id its suing for the new connection but wasnt able to as my console hangs, this happens to me a couple of times when i see AT OK in console randomly, so i wasnt able to see is the original mac id being used or no but after a reboot the gui starts showing the original mac id so it might just be a gui bug but in general mac spoof works fine now, thanks

                                1 Reply Last reply Reply Quote 0
                                • K
                                  kathampy
                                  last edited by

                                  When I set a fake MAC address in the PPPoE interface page and attempt to connect, WireShark shows PADI packets still being broadcasted from em0's MAC address. I'm running 2.0.2-RELEASE.

                                  1 Reply Last reply Reply Quote 0
                                  • rbgargaR
                                    rbgarga Developer Netgate Administrator
                                    last edited by

                                    @xbipin:

                                    tried, it works well but some issues. after i enter a spoofed mac id, it gets implemented and pppoe reconnects and uses the new mac id and everything well but once i goto that spoofed mac id field and remove it and apply again, pppoe reconnects but under ppp tab etc it still keeps showing the spoofed mac id, not the original one, now i tried to do a trace from console to see what amc id its suing for the new connection but wasnt able to as my console hangs, this happens to me a couple of times when i see AT OK in console randomly, so i wasnt able to see is the original mac id being used or no but after a reboot the gui starts showing the original mac id so it might just be a gui bug but in general mac spoof works fine now, thanks

                                    The only way to restore original MAC is rebooting (or filling it manually), since we do not keep this information anywhere.

                                    Renato Botelho

                                    1 Reply Last reply Reply Quote 0
                                    • First post
                                      Last post
                                    Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.