Single WAN simple NAT problem
-
Hi.
I've a very simple setup using 2.1 beta1 20130115.
I configured a single host with PF as default gateway and works great. The problem are from out to in.
I added a NAT port fw from WAN, dest addr WAN, dest port 32122, nat ip the host with pf as gateway, target port 22, source any.
if I try to ssh to 32122 from outside to the WAN address, I get timeout. I tried debugging with packet capture and the reply DOES seem to go back to the caller IP, but the ssh connection never gets established anyway!I checked the port forwarding troubleshooting but everything looks fine to me.
what else can I check?
this is the packet capture log:
15:33:07.507212 IP 62.167.X.Y.57474 > PFSENSE_WAN.32122: tcp 0
15:33:07.507473 IP PFSENSE_WAN.32122 > 62.167.X.Y.57474: tcp 0
15:33:08.518473 IP PFSENSE_WAN.32122 > 62.167.X.Y.57474: tcp 0
15:33:10.501582 IP 62.167.X.Y.57474 > PFSENSE_WAN.32122: tcp 0
15:33:10.501778 IP PFSENSE_WAN.32122 > 62.167.X.Y.57474: tcp 0
15:33:10.518444 IP PFSENSE_WAN.32122 > 62.167.X.Y.57474: tcp 0
15:33:14.518462 IP PFSENSE_WAN.32122 > 62.167.X.Y.57474: tcp 0
15:33:16.512903 IP 62.167.X.Y.57474 > PFSENSE_WAN.32122: tcp 0
15:33:16.513066 IP PFSENSE_WAN.32122 > 62.167.X.Y.57474: tcp 0
15:33:22.518485 IP PFSENSE_WAN.32122 > 62.167.X.Y.57474: tcp 0 -
if I do the same on another host on the lan it works.
the only difference is that the not working one is the KVM host where pfSense runs as guest.