OpenVPN: OpenSSL error: cannot load engine 'padlock'
-
I'm not exactly sure, until which built it was working (I think not more than 2 days back it was ok).
dmesg:
…
padlock0: <aes-cbc,sha1,sha256>on motherboard
...I did a test with "openssl speed -evp aes-256-cbc -engine padlock"...that works:
engine "padlock" set.
To get the most accurate results, try to run this
program when this computer is idle.
Doing aes-256-cbc for 3s on 16 size blocks: 8359397 aes-256-cbc's in 2.99s
Doing aes-256-cbc for 3s on 64 size blocks: 6815283 aes-256-cbc's in 2.99s
Doing aes-256-cbc for 3s on 256 size blocks: 3729810 aes-256-cbc's in 3.00s
Doing aes-256-cbc for 3s on 1024 size blocks: 1326763 aes-256-cbc's in 2.99s
Doing aes-256-cbc for 3s on 8192 size blocks: 189146 aes-256-cbc's in 2.99s
OpenSSL 0.9.8q 2 Dec 2010
built on: date not available
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx)
compiler: cc
available timing options: USE_TOD HZ=128 [sysconf value]
timing function used: getrusage
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
aes-256-cbc 44801.33k 146020.49k 318807.94k 453637.05k 517451.10kHere is my OpenVPN server-config:
dev ovpns1
dev-type tun
tun-ipv6
dev-node /dev/tun1
writepid /var/run/openvpn_server1.pid
#user nobody
#group nobody
script-security 3
daemon
keepalive 10 60
ping-timer-rem
persist-tun
persist-key
proto udp
cipher AES-256-CBC
up /usr/local/sbin/ovpn-linkup
down /usr/local/sbin/ovpn-linkdown
client-connect /usr/local/sbin/openvpn.attributes.sh
client-disconnect /usr/local/sbin/openvpn.attributes.sh
local ...
engine padlock
tls-server
server 10.13.37.0 255.255.255.0
client-config-dir /var/etc/openvpn-csc
username-as-common-name
auth-user-pass-verify /var/etc/openvpn/server1.php via-env
tls-verify /var/etc/openvpn/server1.tls-verify.php
lport 443
management /var/etc/openvpn/server1.sock unix
max-clients 3
push "route 192.168.123.0 255.255.255.0"
push "dhcp-option DOMAIN lan"
push "dhcp-option DNS 192.168.123.1"
client-to-client
duplicate-cn
ca /var/etc/openvpn/server1.ca
cert /var/etc/openvpn/server1.cert
key /var/etc/openvpn/server1.key
dh /etc/dh-parameters.2048
tls-auth /var/etc/openvpn/server1.tls-auth 0
comp-lzo
persist-remote-ip
float
keepalive 20 120
auth sha256
tun-mtu 1500
fragment 1450
mssfixSo something concerning OpenVPN must have changed the last 2 or 3 builts I think.</aes-cbc,sha1,sha256>
-
Since my changeset (a sync from FreeBSD ports) was just merged the day you updated, I looked up if this
may have made it into the build.
https://github.com/bsdperimeter/pfsense-tools/commit/28ad6b86f09f66e61f662b0ee85d1211a4be290aWhile I'm definitely bad at converting time zones back and forward, it does seem that my
commit was only merged after the builder ran.I don't have a padlock capable VIA cpu that, but enabling cryptodev with SNI didn't break things here with the amd64 build from 24th 19:57 EST
I know not all ports are being rebuilt at every run, but maybe @BSDPerimeter could fire
up the OpenVPN port build to make sure your padlock problem is - or is not related to to
the related change :-\ -
I can rebuild it again and see. I know the openvpn22 port was broken quite a bit for 2.0.x builds, but I can't remember if I've rebuilt openvpn 2.3 since then to see if it had any issues.
-
Thanks jim - and supposedly openvpn22 was broken by me while syncing to upstream - sorry about that.
-
OpenVPN 2.3 is rebuilt, new snap run is starting now. Try it again later this evening once it's all uploaded.
-
I've upgraded to the latest built (2.1-BETA1 (i386) built on Fri Jan 25 11:42:50 EST 2013) - still same error as statet above:
…
OpenVPN 2.3.0 i386-portbld-freebsd8.3 [SSL (OpenSSL)] [LZO] [eurephia] [MH] [IPv6] built on Jan 25 2013
openvpn[17542]: Exiting due to fatal error
openvpn[17542]: OpenSSL error: cannot load engine 'padlock'
… -
aha, I see why.
Somehow it's latching onto the openssl from ports, and not from the base system, and we don't compile the openssl from ports with padlock support (not sure when that started to get included…)
-
Next build will be fixed for this.
Also, the next build will include ipsec-tool 0.8.1. Since I had to fix up openssl for this, I went ahead and used it for that.
-
Thank you guys for looking into this.
Upgraded to 2.1-BETA1 (i386) built on Fri Jan 25 17:42:51 EST 2013 FreeBSD 8.3-RELEASE-p5
I get still the same error.
-
That's not the new image.
It's uploading right now.
-
Thank you Jim for your efforts, if things work fine with padlock, I'd like to make a PR to the port maintainer concerning the messed up naming of the padlock patches you had to override in the openssl port.
It doesn't seem many people use padlock - otherwise that would have been fixed upstream already. ;-) -
I'm not sure, if this is already the new image…I just tried it:
2.1-BETA1 (i386) built on Fri Jan 25 22:52:45 EST 2013 FreeBSD 8.3-RELEASE-p5
Still no working OpenVPN with padlock enabled.
-
Same error? Different error?
-
I still get the same error.
-
ok, I think I see what it is now, it didn't copy all of the package version's files to the image, so it's missing the .so files for the other engines. I'll fix that shortly.
-
OK the next new image to go up should have the fixes.
It's not up yet, it will take ~3-4 hours to build and upload.
-
New image is up now.
-
Upgraded to the latest built (2.1-BETA1 (i386) built on Sat Jan 26 10:18:38 EST 2013 FreeBSD 8.3-RELEASE-p5):
…
openvpn[18810]: Initializing OpenSSL support for engine 'padlock
…It works again :)
Thanx jimp & MatSim for the fast fix. You guys doing an amazing work!
-
@MatSim:
Thank you Jim for your efforts, if things work fine with padlock, I'd like to make a PR to the port maintainer concerning the messed up naming of the padlock patches you had to override in the openssl port.
It doesn't seem many people use padlock - otherwise that would have been fixed upstream already. ;-)Feel free to push that one up to FreeBSD. It was a simple fix, rename the patches and "make makesum" to update the checksum/names.
I guess nobody goes out of their way to use the ports openssl+padlock, but it does work with the base version so people probably just use that.
-
Done, for the reference: http://www.freebsd.org/cgi/query-pr.cgi?pr=175622
