Multi wan - gateway offline
-
-
i have made the dns rule but no difference at all and for the DNS gateway , i don't have the gateway tab in my pfsense beside DNS servers
but i have noticed that from seeing the next hope after the pfsense which is a cisco router
after i bring back the second line online no packets hits this line at all
and all the traffic goes to the first line , and all the icmp used in monitoring is generated from one interface
is that normal . after one line goes down all the icmp traffic used in monitoring goes to one line
so how it could check if the second line is come back online ??notes: the dsl lines are not directly attached to pfsense , and their is a cisco router after the pfsense and after it the 2 dsl lines
so why the pfsense is insisting that the wan is offline and it didn't came back online
-
i figure out that it comes back online but after a few hours
-
Does it come back online if you renew the interface ? or disable and then re-enable it?
-
it comes back if i enter to the wan interface (the down one) and i just click save and apply changes without made any configuration.
-
Post a screenshot of your gateways and gateway groups.. are both tier 1?
-
YES , tier 1
-
Your WAN is on 10.24.250.x Net & your WAN2 is on 10.24.250.x Net also, are you sure that both Netwworks doesn't overlap ? Which network mask do you have on each WAN ?
Maybe you need to elaborate a bit more about your setup…
-
@ptt:
Your WAN is on 10.24.250.x Net & your WAN2 is on 10.24.250.x Net also, are you sure that both Netwworks doesn't overlap ? Which network mask do you have on each WAN ?
Internal NIC on 10.24.250.x as well. Unless those are small subnet masks, all 3 NICs may have overlapping subnets.
-
it's all /29 subnet mask
-
i have another problem now that i found that squid proxy is not working with multi wan when i enable it and i enable proxy on lan and loopback interfaces :(
-
I have the same problem with multi-WAN switching. Please help.
-
Same problem here.
My ISP disconnects every 24 hours automatically. So WAN1 goes offline, comes back after a few seconds, but PfSense is still saying 'Offline'. I've set the monitor IP to an IP which is definitely pingable.But I have to say I'm using PfSense 2.1-BETA1 (March 28).
Any ideas to solve this??
-
Have same problem here.
When I dissable Gateway Monitoring it works.I have tried a high down ping time, ms and packetloss but with same problem.
I am running 2.0.3
