Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    NEW Package: freeRADIUS 2.x

    Scheduled Pinned Locked Moved
    pfSense Packages
    80
    628
    662.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      skoenman
      last edited by

      Well i have a whmcs server with mysql/freeradius interface which basicly loads the usernames and passwords in the mysql database….so this is why i want pfsense to sync the usernames so that i can do rate limiting and capping from pfsense.

      1 Reply Last reply Reply Quote 0
      • E
        emperorsum
        last edited by

        @qbik:

        I got it to work, I edited the files but did not know the config resets on reboot, so I edited freeradius.inc on line 362 and 1633, now all is working. On the other server I am using the normal freeradius package installed by me. I just need some more customization for french error message, working on it right now, i will upload the screenshots for the vouchers soon. This package is great, thanks again!

        @Nachtfalke:

        @qbik:

        Hi I am using this package and created a group with 2 attributes: Max-All-Session := 600 (5 min) Simultaneous-Use := 1. I've enabled the noresetcounter on radiusd.conf, users on that group are able to authenticate ok, however they do not get disconnected after 600 sec have past. CP is enabled, interim updates enabled, authenticate users every minute is enabled. I have the same setup on another pf sense server with freeradius installed but not with this package and all is working ok on that one. I am using MySQL on both.

        Thanks

        Hi,
        do you use freeradius2 package on both pfsense or not ? That's not clear for me.

        the attribute: Max-All-Session is not a predefined attribute in GUI. So you probably created this attribute in your mysql database ? And if you use mysql as database for accounting then you need to use the sqlcounter.conf file. This file is NOT supported from GUI. You need to check and perhaps edit this file from shell.

        I don't how it works with mxsql but if I use the ../raddb/modules/counter module (without external database) then this modul is ONLY running on accounting-stop packets, interim-updates do not work. So make sure that it does with mysql.

        re-authenticate every minute should be enabled on CP so that the user gets disconnected. that's right what you did. You should enabled "Disable acct_unique" in FreeRADIUS -> Settings to make accounting work properly.

        For anybody still in doubt pfsense indeed resets few .conf files on reboot eg radiusd.conf sql.conf clients.conf . the file freeradius.inc is responsible for this. freeradius.inc is located in /usr/local/pkg/ ( I am just writing this to help anyone facing any problems with this.. like i did )

        1 Reply Last reply Reply Quote 0
        • M
          markuhde
          last edited by

          I "upgraded" to 64-bit pfSense 2.1 Beta 1 in order to get more available RAM and now FreeRadius is broken. It doesn't respond to authentication attempts and radiusd now sits at a steady 25% CPU load when running. Configuration files were the same (I messed around a little with EAP type and stuff which I really don't understand and created new certificates but it's now set back mostly at least how it was when working fine on 32-bit). It just appears broken on 64-bit. Any ideas?

          1 Reply Last reply Reply Quote 0
          • P
            pszafer
            last edited by

            maybe try to click 'Save' in eg EAP tab, so config of freeradius will be recreated. Then if problem still occurs paste some System logs of radiusd process.

            1 Reply Last reply Reply Quote 0
            • M
              markuhde
              last edited by

              I completely redid the configuration, deleted freeradius from config.xml and reinstalled package and started over. Same 25% CPU from the moment the package started. I'm clueless… what should I post?

              Here's the output of radiusd -X :

              [2.1-BETA1][admin@glacierfire.glaciercamp]/root(1): radiusd -X
              FreeRADIUS Version 2.2.0, for host amd64-portbld-freebsd8.3, built on Dec 20 2012 at 23:20:32
              Copyright (C) 1999-2012 The FreeRADIUS server project and contributors.
              There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
              PARTICULAR PURPOSE.
              You may redistribute copies of FreeRADIUS under the terms of the
              GNU General Public License v2.
              Starting - reading configuration files …
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/radiusd.conf
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/clients.conf
              including files in directory /usr/pbi/freeradius-amd64/etc/raddb/modules/
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/wimax
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/always
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/attr_filter
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/attr_rewrite
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/cache
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/chap
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/checkval
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/counter
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/cui
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/detail
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/detail.example.com
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/detail.log
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/dhcp_sqlippool
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/sql/mysql/ippool-dhcp.conf
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/digest
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/dynamic_clients
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/echo
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/etc_group
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/exec
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/expiration
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/expr
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/files
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/inner-eap
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/ippool
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/krb5
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/ldap
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/linelog
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/otp
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/logintime
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/mac2ip
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/mac2vlan
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/mschap
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/ntlm_auth
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/opendirectory
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/pam
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/pap
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/passwd
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/perl
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/policy
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/preprocess
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/radrelay
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/radutmp
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/realm
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/redis
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/rediswho
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/replicate
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/smbpasswd
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/smsotp
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/soh
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/sql_log
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/sqlcounter_expire_on_login
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/sradutmp
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/unix
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/acct_unique
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/motp
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/datacounter_acct
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/eap.conf
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/policy.conf
              including files in directory /usr/pbi/freeradius-amd64/etc/raddb/sites-enabled/
              including configuration file /usr/pbi/freeradius-amd64/etc/raddb/sites-enabled/default
              main {
              allow_core_dumps = no
              }
              including dictionary file /usr/pbi/freeradius-amd64/etc/raddb/dictionary
              main {
              name = "radiusd"
              prefix = "/usr/pbi/freeradius-amd64"
              localstatedir = "/var"
              sbindir = "/usr/pbi/freeradius-amd64/sbin"
              logdir = "/var/log"
              run_dir = "/var/run"
              libdir = "/usr/pbi/freeradius-amd64/lib/freeradius-2.1.12"
              radacctdir = "/var/log/radacct"
              hostname_lookups = no
              max_request_time = 30
              cleanup_delay = 5
              max_requests = 1024
              pidfile = "/var/run/radiusd.pid"
              checkrad = "/usr/pbi/freeradius-amd64/sbin/checkrad"
              debug_level = 0
              proxy_requests = yes
              log {
              stripped_names = no
              auth = yes
              auth_badpass = no
              auth_goodpass = no
              msg_badpass = ""
              msg_goodpass = ""
              }
              security {
              max_attributes = 200
              reject_delay = 1
              status_server = no
              }
              }
              radiusd: #### Loading Realms and Home Servers ####
              radiusd: #### Loading Clients ####
              client teakettle2 {
              ipaddr = 172.21.12.2
              require_message_authenticator = no
              secret = "mqh6rWnxbTkgQkVn"
              shortname = "teakettle2"
              nastype = "other"
              }
              client cafeteria {
              ipaddr = 172.21.12.3
              require_message_authenticator = no
              secret = "8UmEX8Xr6sRz64R4"
              shortname = "cafeteria"
              nastype = "other"
              }
              client lodgelobby {
              ipaddr = 172.21.12.4
              require_message_authenticator = no
              secret = "5TEEQULqqTB49bYc"
              shortname = "lodgelobby"
              nastype = "other"
              }
              client conferenceroom {
              ipaddr = 172.21.12.5
              require_message_authenticator = no
              secret = "5vQTATZSLBGqKNhx"
              shortname = "conferenceroom"
              nastype = "other"
              }
              client sector1 {
              ipaddr = 172.21.12.6
              require_message_authenticator = no
              secret = "LgVKSbJ6eRcwdJzU"
              shortname = "sector1"
              nastype = "other"
              }
              client sector2 {
              ipaddr = 172.21.12.7
              require_message_authenticator = no
              secret = "aHfBaTuxytqLKXFG"
              shortname = "sector2"
              nastype = "other"
              }
              client sector3 {
              ipaddr = 172.21.12.8
              require_message_authenticator = no
              secret = "ZubfCx8NZ2z6uTyJ"
              shortname = "sector3"
              nastype = "other"
              }
              client sector4 {
              ipaddr = 172.21.12.9
              require_message_authenticator = no
              secret = "mnSmhmWezPySNpbw"
              shortname = "sector4"
              nastype = "other"
              }
              client 5sector1 {
              ipaddr = 172.21.12.10
              require_message_authenticator = no
              secret = "rsFmNjDNAEFGhWvP"
              shortname = "5sector1"
              nastype = "other"
              }
              client midway {
              ipaddr = 172.21.12.12
              require_message_authenticator = no
              secret = "UF4KbWRT7KGPbY2s"
              shortname = "midway"
              nastype = "other"
              }
              radiusd: #### Instantiating modules ####
              instantiate {
              Module: Linked to module rlm_exec
              Module: Instantiating module "exec" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/exec
                exec {
              wait = no
              input_pairs = "request"
              shell_escape = yes
                }
              Module: Linked to module rlm_expr
              Module: Instantiating module "expr" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/expr
              Module: Linked to module rlm_counter
              Module: Instantiating module "daily" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/counter
                counter daily {
              filename = "/var/log/radacct/timecounter/db.daily"
              key = "User-Name"
              reset = "daily"
              count-attribute = "Acct-Session-Time"
              counter-name = "Daily-Session-Time"
              check-name = "Max-Daily-Session"
              reply-name = "Session-Timeout"
              cache-size = 5000
                }
              rlm_counter: Counter attribute Daily-Session-Time is number 11273
              rlm_counter: Current Time: 1361179135 [2013-02-18 02:18:55], Next reset 1361257200 [2013-02-19 00:00:00]
              Module: Instantiating module "weekly" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/counter
                counter weekly {
              filename = "/var/log/radacct/timecounter/db.weekly"
              key = "User-Name"
              reset = "weekly"
              count-attribute = "Acct-Session-Time"
              counter-name = "Weekly-Session-Time"
              check-name = "Max-Weekly-Session"
              reply-name = "Session-Timeout"
              cache-size = 5000
                }
              rlm_counter: Counter attribute Weekly-Session-Time is number 11275
              rlm_counter: Current Time: 1361179135 [2013-02-18 02:18:55], Next reset 1361689200 [2013-02-24 00:00:00]
              Module: Instantiating module "monthly" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/counter
                counter monthly {
              filename = "/var/log/radacct/timecounter/db.monthly"
              key = "User-Name"
              reset = "monthly"
              count-attribute = "Acct-Session-Time"
              counter-name = "Monthly-Session-Time"
              check-name = "Max-Monthly-Session"
              reply-name = "Session-Timeout"
              cache-size = 5000
                }
              rlm_counter: Counter attribute Monthly-Session-Time is number 11277
              rlm_counter: Current Time: 1361179135 [2013-02-18 02:18:55], Next reset 1362121200 [2013-03-01 00:00:00]
              Module: Instantiating module "forever" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/counter
                counter forever {
              filename = "/var/log/radacct/timecounter/db.forever"
              key = "User-Name"
              reset = "never"
              count-attribute = "Acct-Session-Time"
              counter-name = "Forever-Session-Time"
              check-name = "Max-Forever-Session"
              reply-name = "Session-Timeout"
              cache-size = 5000
                }
              rlm_counter: Counter attribute Forever-Session-Time is number 11279
              rlm_counter: Current Time: 1361179135 [2013-02-18 02:18:55], Next reset 0 [2013-02-18 02:00:00]
              rlm_counter: add_defaults: Start

              1 Reply Last reply Reply Quote 0
              • N
                Nachtfalke
                last edited by

                A problem could be the different versions of freeradius on pfsense 2.0 and 2.1
                jimp did some changes on the pfsense server and updated some freeradius files for new freeradius 2.2.0 version.

                pfsense 2.1 is using freeradius 2.2.0 and pfsense 2.0.x is using freeradius 2.1.12. The reinstall could give you the newer version and the freeradius.inc file didn't get that.

                Try to edit the /usr/local/pkg/freeradius.inc file on line 83 and 216

                I will contact jimp to check if it is possible to make a new freeradius2 .tbz file for pfsense 2.0 so that all system use the same version and .inc file can be fixed.

                1 Reply Last reply Reply Quote 0
                • M
                  markuhde
                  last edited by

                  Thanks, I edited those lines, FreeRADIUS still just locks at 25% CPU load when started. If you are interested to help troubleshoot the package, I can give you login credentials if you PM me. Unfortunately, I can't pay anything since I'm doing this work for free for a non-profit camp…

                  [2.1-BETA1][admin@glacierfire.glaciercamp]/root(1): radiusd -X
                  FreeRADIUS Version 2.2.0, for host amd64-portbld-freebsd8.3, built on Dec 20 2012 at 23:20:32
                  Copyright (C) 1999-2012 The FreeRADIUS server project and contributors.
                  There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
                  PARTICULAR PURPOSE.
                  You may redistribute copies of FreeRADIUS under the terms of the
                  GNU General Public License v2.
                  Starting - reading configuration files …
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/radiusd.conf
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/clients.conf
                  including files in directory /usr/pbi/freeradius-amd64/etc/raddb/modules/
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/wimax
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/always
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/attr_filter
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/attr_rewrite
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/cache
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/chap
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/checkval
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/counter
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/cui
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/detail
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/detail.example.com
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/detail.log
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/dhcp_sqlippool
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/sql/mysql/ippool-dhcp.conf
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/digest
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/dynamic_clients
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/echo
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/etc_group
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/exec
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/expiration
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/expr
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/files
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/inner-eap
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/ippool
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/krb5
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/ldap
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/linelog
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/otp
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/logintime
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/mac2ip
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/mac2vlan
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/mschap
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/ntlm_auth
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/opendirectory
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/pam
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/pap
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/passwd
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/perl
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/policy
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/preprocess
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/radrelay
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/radutmp
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/realm
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/redis
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/rediswho
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/replicate
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/smbpasswd
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/smsotp
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/soh
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/sql_log
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/sqlcounter_expire_on_login
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/sradutmp
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/unix
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/acct_unique
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/motp
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/modules/datacounter_acct
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/eap.conf
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/policy.conf
                  including files in directory /usr/pbi/freeradius-amd64/etc/raddb/sites-enabled/
                  including configuration file /usr/pbi/freeradius-amd64/etc/raddb/sites-enabled/default
                  main {
                  allow_core_dumps = no
                  }
                  including dictionary file /usr/pbi/freeradius-amd64/etc/raddb/dictionary
                  main {
                  name = "radiusd"
                  prefix = "/usr/pbi/freeradius-amd64"
                  localstatedir = "/var"
                  sbindir = "/usr/pbi/freeradius-amd64/sbin"
                  logdir = "/var/log"
                  run_dir = "/var/run"
                  libdir = "/usr/pbi/freeradius-amd64/lib/freeradius-2.1.12"
                  radacctdir = "/var/log/radacct"
                  hostname_lookups = no
                  max_request_time = 30
                  cleanup_delay = 5
                  max_requests = 1024
                  pidfile = "/var/run/radiusd.pid"
                  checkrad = "/usr/pbi/freeradius-amd64/sbin/checkrad"
                  debug_level = 0
                  proxy_requests = yes
                  log {
                  stripped_names = no
                  auth = yes
                  auth_badpass = no
                  auth_goodpass = no
                  msg_badpass = ""
                  msg_goodpass = ""
                  }
                  security {
                  max_attributes = 200
                  reject_delay = 1
                  status_server = no
                  }
                  }
                  radiusd: #### Loading Realms and Home Servers ####
                  radiusd: #### Loading Clients ####
                  client teakettle2 {
                  ipaddr = 172.21.12.2
                  require_message_authenticator = no
                  secret = "mqh6rWnxbTkgQkVn"
                  shortname = "teakettle2"
                  nastype = "other"
                  }
                  client cafeteria {
                  ipaddr = 172.21.12.3
                  require_message_authenticator = no
                  secret = "8UmEX8Xr6sRz64R4"
                  shortname = "cafeteria"
                  nastype = "other"
                  }
                  client lodgelobby {
                  ipaddr = 172.21.12.4
                  require_message_authenticator = no
                  secret = "5TEEQULqqTB49bYc"
                  shortname = "lodgelobby"
                  nastype = "other"
                  }
                  client conferenceroom {
                  ipaddr = 172.21.12.5
                  require_message_authenticator = no
                  secret = "5vQTATZSLBGqKNhx"
                  shortname = "conferenceroom"
                  nastype = "other"
                  }
                  client sector1 {
                  ipaddr = 172.21.12.6
                  require_message_authenticator = no
                  secret = "LgVKSbJ6eRcwdJzU"
                  shortname = "sector1"
                  nastype = "other"
                  }
                  client sector2 {
                  ipaddr = 172.21.12.7
                  require_message_authenticator = no
                  secret = "aHfBaTuxytqLKXFG"
                  shortname = "sector2"
                  nastype = "other"
                  }
                  client sector3 {
                  ipaddr = 172.21.12.8
                  require_message_authenticator = no
                  secret = "ZubfCx8NZ2z6uTyJ"
                  shortname = "sector3"
                  nastype = "other"
                  }
                  client sector4 {
                  ipaddr = 172.21.12.9
                  require_message_authenticator = no
                  secret = "mnSmhmWezPySNpbw"
                  shortname = "sector4"
                  nastype = "other"
                  }
                  client 5sector1 {
                  ipaddr = 172.21.12.10
                  require_message_authenticator = no
                  secret = "rsFmNjDNAEFGhWvP"
                  shortname = "5sector1"
                  nastype = "other"
                  }
                  client midway {
                  ipaddr = 172.21.12.12
                  require_message_authenticator = no
                  secret = "UF4KbWRT7KGPbY2s"
                  shortname = "midway"
                  nastype = "other"
                  }
                  radiusd: #### Instantiating modules ####
                  instantiate {
                  Module: Linked to module rlm_exec
                  Module: Instantiating module "exec" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/exec
                    exec {
                  wait = no
                  input_pairs = "request"
                  shell_escape = yes
                    }
                  Module: Linked to module rlm_expr
                  Module: Instantiating module "expr" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/expr
                  Module: Linked to module rlm_counter
                  Module: Instantiating module "daily" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/counter
                    counter daily {
                  filename = "/var/log/radacct/timecounter/db.daily"
                  key = "User-Name"
                  reset = "daily"
                  count-attribute = "Acct-Session-Time"
                  counter-name = "Daily-Session-Time"
                  check-name = "Max-Daily-Session"
                  reply-name = "Session-Timeout"
                  cache-size = 5000
                    }
                  rlm_counter: Counter attribute Daily-Session-Time is number 11273
                  rlm_counter: Current Time: 1361209237 [2013-02-18 10:40:37], Next reset 1361257200 [2013-02-19 00:00:00]
                  Module: Instantiating module "weekly" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/counter
                    counter weekly {
                  filename = "/var/log/radacct/timecounter/db.weekly"
                  key = "User-Name"
                  reset = "weekly"
                  count-attribute = "Acct-Session-Time"
                  counter-name = "Weekly-Session-Time"
                  check-name = "Max-Weekly-Session"
                  reply-name = "Session-Timeout"
                  cache-size = 5000
                    }
                  rlm_counter: Counter attribute Weekly-Session-Time is number 11275
                  rlm_counter: Current Time: 1361209237 [2013-02-18 10:40:37], Next reset 1361689200 [2013-02-24 00:00:00]
                  Module: Instantiating module "monthly" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/counter
                    counter monthly {
                  filename = "/var/log/radacct/timecounter/db.monthly"
                  key = "User-Name"
                  reset = "monthly"
                  count-attribute = "Acct-Session-Time"
                  counter-name = "Monthly-Session-Time"
                  check-name = "Max-Monthly-Session"
                  reply-name = "Session-Timeout"
                  cache-size = 5000
                    }
                  rlm_counter: Counter attribute Monthly-Session-Time is number 11277
                  rlm_counter: Current Time: 1361209237 [2013-02-18 10:40:37], Next reset 1362121200 [2013-03-01 00:00:00]
                  Module: Instantiating module "forever" from file /usr/pbi/freeradius-amd64/etc/raddb/modules/counter
                    counter forever {
                  filename = "/var/log/radacct/timecounter/db.forever"
                  key = "User-Name"
                  reset = "never"
                  count-attribute = "Acct-Session-Time"
                  counter-name = "Forever-Session-Time"
                  check-name = "Max-Forever-Session"
                  reply-name = "Session-Timeout"
                  cache-size = 5000
                    }
                  rlm_counter: Counter attribute Forever-Session-Time is number 11279
                  rlm_counter: Current Time: 1361209237 [2013-02-18 10:40:37], Next reset 0 [2013-02-18 10:00:00]
                  rlm_counter: add_defaults: Start
                  ^C
                  [2.1-BETA1][admin@glacierfire.glaciercamp]/root(2):

                  1 Reply Last reply Reply Quote 0
                  • N
                    Nachtfalke
                    last edited by

                    Hi again,

                    I did and upgrade of an "old" pfsense 2.1-BETA0 with freeradius2.1.12 to todays pfsense snapshot and freeradius2.2.0

                    Service started and no problems with high CPU usage.
                    But nevertheless there is something which needs to be corrected and please make sure you did that.

                    Edit the freeradius.inc file:

                    
vi /usr/local/pkg/freeradius.inc

                    Remove this line 83:

                    exec("chown -R root:wheel " . FREERADIUS_BASE . "/etc/raddb && chown -R root:wheel " . FREERADIUS_BASE . "/lib/freeradius-2.1.12 && chown -R root:wheel /var/log/radacct");

                    With this line:

                    [code]exec("chown -R root:wheel " . FREERADIUS_BASE . "/etc/raddb && chown -R root:wheel " . FREERADIUS_BASE . "/lib/freeradius-2.2.0 && chown -R root:wheel /var/log/radacct");[/code]

                    Remove this line 216:

                    libdir = \${exec_prefix}/lib/freeradius-2.1.12

                    with this line:

                    libdir = \${exec_prefix}/lib/freeradius-2.2.0

                    Save the freeradius.inc

                    Now go to Diagnoctics –> Command Prompt and put the following into the PHP Execute:

                    require_once('/usr/local/pkg/freeradius.inc');
freeradius_install_command();

                    This command will take some time. It will recreate all folders and config files and restart freeradius service.
                    After that try again if it is working.

                    Question:
                    Do you "just" have problems with high CPU usage or do you have problems with freeradius at all? Does it show you "Ready to process requests" ?

                    PS: No need to SSH and no need to pay money. Use your money for usefull things or donate to pfsense but not to me ;-)

                    1 Reply Last reply Reply Quote 0
                    • M
                      markuhde
                      last edited by

                      No, it's not just high CPU usage, it doesn't work, never gets to ready to process. I sent you exactly what it does :) I edited those files but I never ran that command you told me to, just did that. It still gets stuck on the same line (add defaults: start). Here's the radiusd thread causing the 25% CPU use:

                      59445 root        119    0 34040M  9348K CPU1    1  1:13 100.00% radiusd

                      100% use on that virtual core, it's like it's pegging it out in some kind of loop. Always worked fine on 32-bit. Maybe a complete system reinstall as 64-bit is in order, but it won't be able to happen for a month or so (though the RADIUS is only needed for youth camps come summer, right now it's all rental groups that don't get to bypass the proxy server :) )

                      1 Reply Last reply Reply Quote 0
                      • N
                        Nachtfalke
                        last edited by

                        Perhaps just try with a complete fresh install.

                        Do not mix architectures between snapshots. Just start with amd64 and stay on amd64 or do a fresh install.
                        And after you installed the freeradius2 package again, do the changes, run the command I wrote and then try again :-)

                        1 Reply Last reply Reply Quote 0
                        • M
                          markuhde
                          last edited by

                          Yeah, but I can't do a fresh install for about three weeks :) Going to just do that!

                          1 Reply Last reply Reply Quote 0
                          • N
                            Nachtfalke
                            last edited by

                            Is freeradius2 starting if you remove all config entries from config.xml file and do a fresh freeradius2 installation ?
                            The only thing you need to configure is a listening interface and then freeradius must start. If it starts it could be an config problem - some special char or some syntax error.

                            Just a suggestion.

                            1 Reply Last reply Reply Quote 0
                            • M
                              markuhde
                              last edited by

                              Nope, I tried that already, no luck. I actually deleted my entire configuration and started over. Thus why there's no users except the one test user…

                              1 Reply Last reply Reply Quote 0
                              • A
                                AJOto
                                last edited by

                                Try to install and….

                                $ pkg_add -r http://files.pfsense.org/packages/8/All/freeradius-2.1.12_1.tbz
tar: Failed to set default locale
tar: Failed to set default locale
tar: tar: Failed to set default locale
Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale

************************************************************

The OpenLDAP client package has been successfully installed.

Edit
  /usr/local/etc/openldap/ldap.conf
to change the system-wide client defaults.

Try `man ldap.conf' and visit the OpenLDAP FAQ-O-Matic at
  http://www.OpenLDAP.org/faq/index.cgi?file=3
for more information.

************************************************************

tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale

====
Note that some of the standard modules are provided as separate
ports since they require extra dependencies:

bsddb           databases/py-bsddb
gdbm            databases/py-gdbm
sqlite3		databases/py-sqlite3
tkinter         x11-toolkits/py-tkinter

Install them as needed.
====

tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
Removing stale symlinks from /usr/bin...
    Skipping /usr/bin/perl
    Skipping /usr/bin/perl5
    Removing /usr/local/bin/perl5.14.2 installed by an older perl port
Done.
Creating various symlinks in /usr/bin...
    Symlinking /usr/local/bin/perl5.12.4 to /usr/bin/perl
    Symlinking /usr/local/bin/perl5.12.4 to /usr/bin/perl5
Done.
cd: can't cd to /usr/include
Cleaning up /etc/make.conf... Done.
Spamming /etc/make.conf... Done.
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
pkg_add: warning: package 'libxml2-2.7.8_3' requires 'libiconv-1.14', but 'libiconv-1.13.1_1' is installed
tar: Failed to set default locale
tar: Failed to set default locale
tar: Failed to set default locale
pkg_add: warning: package 'postgresql-client-8.4.12' requires 'libiconv-1.14', but 'libiconv-1.13.1_1' is installed

The PostgreSQL port has a collection of "side orders":

postgresql-docs
  For all of the html documentation

p5-Pg
  A perl5 API for client access to PostgreSQL databases.

postgresql-tcltk 
  If you want tcl/tk client support.

postgresql-jdbc
  For Java JDBC support.

postgresql-odbc
  For client access from unix applications using ODBC as access
  method. Not needed to access unix PostgreSQL servers from Win32
  using ODBC. See below.

ruby-postgres, py-PyGreSQL
  For client access to PostgreSQL databases using the ruby & python
  languages.

postgresql-plperl, postgresql-pltcl & postgresql-plruby
  For using perl5, tcl & ruby as procedural languages.

postgresql-contrib
  Lots of contributed utilities, postgresql functions and
  datatypes. There you find pg_standby, pgcrypto and many other cool
  things.

etc...

===> Setting user and group in radiusd.conf
===> Creating users and/or groups.
Using existing group 'freeradius'.
Using existing user 'freeradius'.
===> Bootstrapping default certificates, please wait...
tar: tar: Failed to set default localeFailed to set default locale

===> Adjusting ownership of directory /usr/local/etc/raddb
===> Adjusting ownership of directory /var/log/radacct
===> Adjusting ownership of directory /var/run/radiusd
===> Adjusting ownership of /var/log/radius.log
===> Adjusting ownership of /var/log/radutmp
===> Adjusting ownership of /var/log/radwtmp
===> Updating libdir in /usr/local/etc/raddb/radiusd.conf
pkg_add: warning: package 'freeradius-2.1.12_1' requires 'libiconv-1.14', but 'libiconv-1.13.1_1' is installed

===============================================================================

To enable FreeRADIUS, put the following line in /etc/rc.conf

radiusd_enable="YES"

The sample configuration can be found at
/usr/local/share/examples/freeradius/raddb

If you are upgrading FreeRADIUS, you are advised to use this as a reference
for updating your configuration.

FreeRADIUS will look for its configuration directory at
/usr/local/etc/raddb by default.

If you did not already have a configuration at this location, the sample
configuration has been copied to this location and has been bootstrapped.

If you wish to point FreeRADIUS to a configuration at a different
location, put the following line in /etc/rc.conf

radiusd_flags="-d /path/to/raddb"

To start the server in normal (daemon) mode, run:

/usr/local/etc/rc.d/radiusd start

and to stop the server, run:

/usr/local/etc/rc.d/radiusd stop

To start the server in debugging mode, run:

/usr/local/etc/rc.d/radiusd debug

You are advised to make cautious changes to the configuration, and to test
frequently, using debugging mode where necessary. Try to resist the
temptation to disable or delete things that you don't understand - you may
well break things!

The documentation has been installed at /usr/local/share/doc/freeradius

Useful configuration advice can be found in the FreeRADIUS Wiki at
http://wiki.freeradius.org

===============================================================================
                                1 Reply Last reply Reply Quote 0
                                • N
                                  Nachtfalke
                                  last edited by

                                  @AJOto:

                                  Try to install and….

                                  $ pkg_add -r http://files.pfsense.org/packages/8/All/freeradius-2.1.12_1.tbz
(...)

                                  What do you want to do?

                                  If you want to use freeradius2 package on pfsense then just go to
                                  System –> Package Manager --> Available Packages
                                  and install freeradius2

                                  No need to do that manual from the console and it will not work.

                                  1 Reply Last reply Reply Quote 0
                                  • A
                                    AJOto
                                    last edited by

                                    @Nachtfalke:

                                    @AJOto:

                                    Try to install and….

                                    $ pkg_add -r http://files.pfsense.org/packages/8/All/freeradius-2.1.12_1.tbz
(...)

                                    What do you want to do?

                                    If you want to use freeradius2 package on pfsense then just go to
                                    System –> Package Manager --> Available Packages
                                    and install freeradius2

                                    No need to do that manual from the console and it will not work.

                                    System –> Package Manager --> Available Packages
                                    and install freeradius2
                                    But dont RUN :(

                                    I tried all ways to install ... but this package does not want to start

                                    $ radiusd -X
FreeRADIUS Version 2.2.0, for host i386-portbld-freebsd8.3, built on Dec 20 2012 at 23:43:04
Copyright (C) 1999-2012 The FreeRADIUS server project and contributors. 
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A 
PARTICULAR PURPOSE. 
You may redistribute copies of FreeRADIUS under the terms of the 
GNU General Public License v2\. 
Starting - reading configuration files ...
including configuration file /usr/pbi/freeradius-i386/etc/raddb/radiusd.conf
including configuration file /usr/pbi/freeradius-i386/etc/raddb/clients.conf
including files in directory /usr/pbi/freeradius-i386/etc/raddb/modules/
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/wimax
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/always
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/attr_filter
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/attr_rewrite
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/cache
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/chap
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/checkval
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/counter
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/cui
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/detail
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/detail.example.com
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/detail.log
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/dhcp_sqlippool
including configuration file /usr/pbi/freeradius-i386/etc/raddb/sql/mysql/ippool-dhcp.conf
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/digest
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/dynamic_clients
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/echo
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/etc_group
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/exec
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/expiration
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/expr
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/files
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/inner-eap
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/ippool
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/krb5
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/ldap
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/linelog
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/otp
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/logintime
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/mac2ip
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/mac2vlan
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/mschap
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/ntlm_auth
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/opendirectory
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/pam
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/pap
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/passwd
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/perl
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/policy
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/preprocess
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/radrelay
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/radutmp
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/realm
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/redis
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/rediswho
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/replicate
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/smbpasswd
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/smsotp
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/soh
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/sql_log
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/sradutmp
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/unix
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/acct_unique
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/motp
including configuration file /usr/pbi/freeradius-i386/etc/raddb/modules/datacounter_acct
including configuration file /usr/pbi/freeradius-i386/etc/raddb/eap.conf
including configuration file /usr/pbi/freeradius-i386/etc/raddb/policy.conf
including files in directory /usr/pbi/freeradius-i386/etc/raddb/sites-enabled/
including configuration file /usr/pbi/freeradius-i386/etc/raddb/sites-enabled/default
main {
	allow_core_dumps = no
}
including dictionary file /usr/pbi/freeradius-i386/etc/raddb/dictionary
main {
	name = "radiusd"
	prefix = "/usr/pbi/freeradius-i386"
	localstatedir = "/var"
	sbindir = "/usr/pbi/freeradius-i386/sbin"
	logdir = "/var/log"
	run_dir = "/var/run"
	libdir = "/usr/pbi/freeradius-i386/lib/freeradius-2.1.12"
	radacctdir = "/var/log/radacct"
	hostname_lookups = yes
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 1024
	pidfile = "/var/run/radiusd.pid"
	checkrad = "/usr/pbi/freeradius-i386/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
	stripped_names = yes
	auth = yes
	auth_badpass = yes
	auth_goodpass = yes
	msg_badpass = ""
	msg_goodpass = ""
 }
 security {
	max_attributes = 200
	reject_delay = 1
	status_server = no
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
 client system {
	ipaddr = 192.168.1.1
	require_message_authenticator = no
	secret = "*******"
	shortname = "system"
	nastype = "other"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating module "exec" from file /usr/pbi/freeradius-i386/etc/raddb/modules/exec
  exec {
	wait = no
	input_pairs = "request"
	shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating module "expr" from file /usr/pbi/freeradius-i386/etc/raddb/modules/expr
 Module: Linked to module rlm_counter
 Module: Instantiating module "daily" from file /usr/pbi/freeradius-i386/etc/raddb/modules/counter
  counter daily {
	filename = "/var/log/radacct/timecounter/db.daily"
	key = "User-Name"
	reset = "daily"
	count-attribute = "Acct-Session-Time"
	counter-name = "Daily-Session-Time"
	check-name = "Max-Daily-Session"
	reply-name = "Session-Timeout"
	cache-size = 5000
  }
rlm_counter: Counter attribute Daily-Session-Time is number 11273
rlm_counter: Current Time: 1364223550 [2013-03-25 16:59:10], Next reset 1364248800 [2013-03-26 00:00:00]
gdbm fatal: read error
                                    1 Reply Last reply Reply Quote 0
                                    • N
                                      Nachtfalke
                                      last edited by 

                                      gdbm fatal: read error

                                      I saw this problem several times in other threads. In most cases it was a problem with the pfsense installation.
                                      Can you try to do a fresh installation of pfsense and try the package again ?

                                      In general freeradius2 should start after you setup a listening interface.

                                      1 Reply Last reply Reply Quote 0
                                      • S
                                        Slam
                                        last edited by

                                        Thanks for this great contribution.

                                        I am currently testing pfsense 2.0.3 with freeradius2 in appliance only mode.

                                        I think I've found a small bug, if a radius user is created with an email address .i.e "tom@example.com" and "Amount of traffic" is set, this user is unable to login.

                                        I've added "@" to /usr/local/etc/raddb/scripts/datacounter_*.sh files on the line

                                        USERNAME=`echo -n "$1" | sed 's/[^0-9a-zA-Z.:_-[color=red]@]/X/g'

                                        I am able to log on with "tom@example.com", however traffic accounting completely stops, for all users not just ones with @ in their names, if I remove my changes from  /usr/local/etc/raddb/scripts/datacounter_acct.sh, accounting works again but not for @ usernames.

                                        Any help?

                                        1 Reply Last reply Reply Quote 0
                                        • N
                                          Nachtfalke
                                          last edited by

                                          You probably need to modify that on both functions:

                                          freeradius_datacounter_auth_resync()
freeradius_datacounter_acct_resync()

                                          Further you need to restart pfsense to recreate the .sh files.

                                          Or you go to diagnostics –> command prompt:

                                          require_once("/usr/local/pkg/freeradius.inc");
                                          freeradius_datacounter_auth_resync();
                                          freeradius_datacounter_acct_resync();

                                          1 Reply Last reply Reply Quote 0
                                          • S
                                            Slam
                                            last edited by

                                            Thanks.

                                            I had the same results, I even commented out the realms section where it denies @ logins, still nothing.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post